The quickest way to restart your Fitbit
Most Fitbit devices restart by holding the button on the side or back for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then releasing. The exact button location and hold time depend on your model — a Charge 5 uses the side button, while an Inspire 3 uses the back button. If your device has a touchscreen, you may also see a power menu appear partway through the hold; keep holding until the logo shows.
A restart clears temporary glitches that cause the device to freeze, fail to sync with your phone, or stop tracking steps. It does not erase your data — your stats and settings stay on the device and in the Fitbit app. A restart is safe to do anytime and takes less than a minute.
Key Takeaways
- Hold the button on your Fitbit for 10 to 15 seconds until the Fitbit logo appears, then release.
- The button location varies by model: side button for Charge and Sense models, back button for Inspire and Flex models.
- A restart clears freezes and sync problems without erasing your activity data or settings.
- If the device still does not respond after a restart, try charging it for at least 15 minutes before trying again.
- A factory reset erases all data and is a separate step only needed if a restart does not fix the problem.
Restart steps by Fitbit model
The restart process is nearly identical across Fitbit models, but the button you press varies. Fitbit groups devices into two button layouts: side-button models (Charge 6, Charge 5, Sense 2, Sense) and back-button models (Inspire 3, Inspire 2, Flex 2). If you own an older model like the Alta HR or Ionic, the restart method is the same — hold the button until the logo appears — but the button location may differ slightly.
For Charge and Sense models, locate the button on the right side of the device. Press and hold it without releasing. After about 10 seconds, the screen will go black. Keep holding for another few seconds until you see the Fitbit logo and a brief animation. Release the button. The device will restart and return to the clock face within 30 seconds.
For Inspire and Flex models, the button is on the back of the device. Use the same hold-and-wait method: press and hold until the screen goes black, then continue holding until the logo appears. Release and wait for the device to return to normal. Flex 2 may take slightly longer to restart than other models, but the process is identical.
What to do if the button does not respond
If pressing the button produces no response — the screen stays black or frozen — the device may have a low battery. Plug your Fitbit into its charging cable and leave it charging for at least 15 minutes. Many devices will not respond to button presses when the battery is critically low. After 15 minutes of charging, try the restart process again.
If the device still does not respond after charging, try a force restart by holding the button for 20 to 30 seconds instead of 10 to 15. Some devices require a longer hold when they are truly frozen. If the Fitbit logo still does not appear after 30 seconds, the device may have a hardware problem and you should contact Fitbit support.
Restarting versus factory reset
A restart and a factory reset are not the same. A restart clears temporary problems and keeps all your data intact. A factory reset erases everything — your activity history, custom settings, and saved data — and returns the device to its original state. You should only factory reset if a restart does not fix the problem and you are willing to lose your data.
To factory reset, you typically go into the device settings menu (if the screen is responsive) and look for a "Clear User Data" or "Factory Reset" option. The exact path varies by model. If your device is too frozen to access settings, contact Fitbit support for guidance on your specific model before attempting a factory reset.
Syncing after a restart
After your Fitbit restarts, it should automatically sync with the Fitbit app on your phone within a few minutes if Bluetooth is on and the app is open. If sync does not happen automatically, open the Fitbit app, go to the Profile tab, tap your device, and pull down to refresh. This manual sync usually completes within 30 seconds.
If the device still will not sync after a restart, try restarting your phone as well. Phone and device sometimes need to reconnect after a device restart. If sync still fails, check that Bluetooth is turned on in your phone settings and that the Fitbit app has permission to use Bluetooth.
When a restart does not fix the problem
If your Fitbit still freezes, fails to track, or will not sync after a restart and a phone restart, the issue may be deeper than a temporary glitch. Before contacting support, try these steps: make sure the device is fully charged, uninstall and reinstall the Fitbit app, and check that your phone's operating system is up to date. These steps resolve many problems that a straightforward restart cannot.
If none of those steps work, you have a few options. You can contact Fitbit support through the app (tap Profile, then your device, then the gear icon for settings, then scroll to find Help & Support). You can also visit the Fitbit website and use their support chat. Have your device model and the date you purchased it ready when you contact them.
Frequently Asked Questions
Will restarting my Fitbit erase my steps and activity data?
No. A restart only clears temporary problems in the device's memory. All your activity data, heart rate history, sleep records, and custom settings remain on the device and in the Fitbit app. Your data is safe.
How often should I restart my Fitbit?
You do not need to restart regularly. Restart only when the device freezes, stops responding to taps, fails to sync, or stops tracking. Most people restart their Fitbit only a few times a year, if at all. If you find yourself restarting weekly, contact Fitbit support — it may indicate a deeper problem.
What if my Fitbit restarts on its own without me pressing the button?
Occasional unexpected restarts are usually harmless and caused by a software glitch. If your device restarts itself multiple times a day, it may have a battery or software problem. Try charging it fully and checking the Fitbit app for any pending updates. If the problem continues, contact Fitbit support.
Can I restart my Fitbit while it is charging?
Yes, you can restart while charging. The restart will not interrupt the charge or damage the device. However, if your device is unresponsive due to a very low battery, charge it for at least 15 minutes before attempting the restart.
Does restarting my Fitbit disconnect it from my phone?
No. The restart does not erase the pairing between your Fitbit and phone. After the restart completes, the device will reconnect to the app automatically. You do not need to re-pair or re-enter your password.