Resync your Fitbit by disconnecting and reconnecting it to your phone or computer
When your Fitbit stops syncing—meaning it is not sending your activity data to the Fitbit app—the fastest fix is to unpair the device and pair it again. This clears out the connection between your Fitbit and your phone or computer without erasing any data stored on the device itself. Most resyncs take less than five minutes and work whether you sync over Bluetooth or Wi-Fi.
The exact steps depend on whether you use an iPhone, Android phone, or computer, and which Fitbit model you own. The process is the same for all current Fitbit models—Charge, Inspire, Sense, Versa, and others—but the app menus differ slightly between iOS and Android.
Key Takeaways
- Unpairing your Fitbit and pairing it again fixes most sync problems without losing any of your data or settings.
- Before you unpair, write down your Fitbit's serial number (found in the Fitbit app under your device settings) so you can identify it when pairing again.
- After unpairing, restart your phone or computer and wait 30 seconds before opening the Fitbit app and pairing again.
- If resyncing does not work, check that Bluetooth is on, that you are within 30 feet of your phone, and that your Fitbit battery is above 10 percent.
How to unpair your Fitbit on iPhone
Open the Fitbit app and tap the profile icon in the bottom right corner. Scroll down and tap your device name. Tap the gear icon to open device settings. Scroll to the bottom and tap "Unpair This Device," then confirm by tapping "Unpair" again. The app will show a message saying your device has been unpaired.
After unpairing, close the Fitbit app completely. Restart your iPhone by powering it off and back on. Wait 30 seconds, then open the Fitbit app again. Tap "Set Up a Device" and follow the pairing steps, selecting your device model and allowing Bluetooth access when prompted. Your Fitbit will reconnect and begin syncing your data.
How to unpair your Fitbit on Android
Open the Fitbit app and tap the profile icon in the bottom right. Tap your device name. Tap the gear icon for settings. Scroll down and tap "Unpair This Device," then confirm. Close the app completely and restart your Android phone. Wait 30 seconds, then open the Fitbit app again.
Tap "Set Up a Device," select your Fitbit model, and allow Bluetooth permissions when the app asks. Your Fitbit will pair and sync. If the app asks for location permission, grant it—Android requires location access for Bluetooth to work, even though the Fitbit app does not use your location.
How to unpair your Fitbit on a computer
If you sync your Fitbit to a Windows or Mac computer instead of a phone, open the Fitbit app on your computer. Click your profile icon in the top right, then click your device name. Click the gear icon for settings. Scroll down and click "Unpair This Device," then confirm.
Close the Fitbit app completely and restart your computer. Wait one minute, then open the Fitbit app again. Click "Set Up a Device" and follow the pairing steps. Your Fitbit will reconnect. If you use both a phone and a computer, you only need to unpair on one device—the other will resync automatically once the first one is working.
Check these things before you unpair
Before you go through the unpairing process, verify that the problem is actually a sync issue and not something simpler. Open the Fitbit app and look at the last sync time shown at the top of the screen. If it says "Synced just now" or shows a recent time, your Fitbit is syncing fine and the issue may be elsewhere.
If the sync time is old, check that Bluetooth is turned on in your phone or computer settings. Make sure your Fitbit battery is above 10 percent—a very low battery can prevent syncing. Move your Fitbit within 30 feet of your phone or computer, as Bluetooth has a limited range. If you have not opened the Fitbit app in several days, straightforward opening it and waiting 30 seconds often triggers a sync without any unpairing needed.
What to do if resyncing does not work
If your Fitbit still does not sync after unpairing and pairing again, restart the device itself. Most Fitbits restart by holding the button on the side or back for 10 to 15 seconds until you see the Fitbit logo. Check the Fitbit support website for your specific model's restart steps, as the button location varies.
After restarting your Fitbit, wait two minutes and then open the Fitbit app on your phone or computer. The device should sync automatically. If it still does not work, check that your Fitbit app is up to date by opening your phone's app store or visiting the Fitbit website to read the latest version. Outdated app versions sometimes lose sync with newer Fitbit firmware.
When to contact Fitbit support
If your Fitbit still will not sync after restarting both the device and your phone or computer, and after updating the app, the device itself may have a hardware problem. Fitbit support can walk you through additional troubleshooting steps specific to your model. You can reach them through the Fitbit app by tapping your profile, scrolling to the bottom, and tapping "Contact Us."
Keep your Fitbit's serial number handy when you contact support—you can find it in the Fitbit app under your device settings, or on the back of the device itself. If your Fitbit is still under warranty, Fitbit may replace it at no cost if the sync problem is caused by a defect.
Frequently Asked Questions
Will unpairing my Fitbit erase my data?
No. Unpairing only disconnects your Fitbit from the app; all your activity data, steps, and settings stay on the device. Once you pair it again, that data syncs to the app and appears in your history.
Can I pair my Fitbit to a different phone?
Yes. Unpair it from your current phone, then pair it to a new phone using the same Fitbit account. Your data will sync to the new phone. If you want to use the Fitbit on multiple phones at once, you can pair it to more than one device—just make sure you are using the same Fitbit account on all of them.
How long does it take to resync after pairing?
Usually less than one minute. After you complete the pairing steps, your Fitbit will sync automatically and show your recent activity in the app. If it takes longer than five minutes, try closing and reopening the app.
What if my Fitbit is not showing up when I try to pair it?
Make sure Bluetooth is on and your Fitbit is charged. Restart your phone or computer, then try pairing again. If your Fitbit still does not appear, restart the Fitbit itself by holding the button for 10 to 15 seconds, then try pairing once more.
Do I need to unpair if I just want to update my Fitbit?
No. Updates happen automatically when your Fitbit syncs. Just open the Fitbit app and let it sync—if an update is available, it will read and install in the background while your Fitbit is charging.