Resync your Fitbit by signing out and back into the app, or by removing and re-adding the device
When your Fitbit stops syncing data to your phone or computer, the fastest fix is to sign out of the Fitbit app completely, then sign back in. This clears the connection between your device and the app without erasing your data. If that does not work, you can remove the device from your account and add it again — the Fitbit will pair fresh and sync normally. Most sync problems clear within a few minutes of one of these two steps.
Sync failures usually happen after a software update, if your phone's Bluetooth is turned off, or if the Fitbit has not connected in several days. Before you resync, check that Bluetooth is on and that your Fitbit is charged to at least 20 percent. If you have multiple phones or computers syncing to the same Fitbit, disconnect all but one before you resync.
Key Takeaways
- Sign out of the Fitbit app entirely, wait 30 seconds, then sign back in — this solves most sync problems without removing your device.
- Make sure Bluetooth is turned on in your phone settings and that your Fitbit has at least 20 percent battery before you start.
- If signing back in does not work, remove the device from your account in the app settings, then add it again as a new device.
- After you resync, wait five to ten minutes for your Fitbit to send all stored data to the app — do not close the app during this time.
Sign out and sign back in to the Fitbit app
Open the Fitbit app on your phone or computer. Tap the profile icon in the bottom right corner (on phone) or click your name in the top left (on computer). Scroll down and select "Sign Out". Wait at least 30 seconds, then sign back in with your email and password. The app will reconnect to your Fitbit automatically.
This method keeps your device linked to your account and preserves all your data and settings. Your Fitbit will begin syncing within a minute or two. If you see a message asking you to set up your device, tap "I Already Have a Device" instead of starting a new setup.
Remove and re-add your Fitbit device
If signing out does not restore the sync, remove the device from your account. Open the Fitbit app, tap your profile icon, and select "Devices". Find your Fitbit in the list and tap the gear icon next to it. Scroll down and tap "Remove Device". Confirm when the app asks you to verify.
Now add it back. In the Fitbit app, tap the plus icon to add a new device. Select your Fitbit model from the list. Hold your phone near the Fitbit and follow the on-screen pairing steps. When the app asks whether you have a Fitbit account, choose "I Already Have a Device" and sign in with your email. The app will find your existing data and sync it to your device.
Check Bluetooth and battery before you resync
Sync failures often happen because Bluetooth is off or the Fitbit battery is too low. On your phone, go to Settings and confirm Bluetooth is turned on. On your Fitbit, check the battery percentage by swiping to the battery screen. If it is below 20 percent, charge the device for at least 30 minutes before you try to sync again.
If you have multiple phones or computers syncing to the same Fitbit, disconnect all but one. Open the Fitbit app on each device, sign out, and do not sign back in until you have finished syncing on your primary phone. Multiple active connections can cause the Fitbit to refuse sync requests.
Wait for the sync to complete after reconnecting
After you sign back in or re-add your device, the Fitbit will send all stored data to the app. This can take five to ten minutes if your Fitbit has not synced in several days. Do not close the app, turn off Bluetooth, or put your phone to sleep during this time. Leave the app open and your phone near the Fitbit until you see the sync complete message.
You will know the sync is done when the app stops showing a loading icon and displays your current stats and activity. Your Fitbit will show a checkmark or confirmation on its screen as well. After this, your Fitbit should sync automatically every time you open the app or come within Bluetooth range of your phone.
Restart your Fitbit if resync still does not work
If your Fitbit still will not sync after you have signed out and re-added the device, restart the Fitbit itself. The restart method depends on your model. For most Fitbits, hold the button on the side or back of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen. Release the button and wait for the device to turn back on.
After the restart, open the Fitbit app and wait for it to connect. The app may ask you to set up the device again — if so, choose "I Already Have a Device" to keep your existing account and data. Once the sync completes, your Fitbit should work normally. If it still will not sync, contact Fitbit support with your device model and the steps you have already tried.
Frequently Asked Questions
Will resyncing my Fitbit erase my data?
No. Signing out of the app or removing and re-adding your device does not erase any data. Your steps, heart rate, sleep, and other stats stay on Fitbit's servers and will sync back to your device once the connection is restored. You only lose data if you factory reset the Fitbit itself, which is different from resyncing.
Why does my Fitbit keep losing sync?
Fitbits lose sync when Bluetooth drops, when the app crashes, or when your phone is too far from the device. If this happens repeatedly, try keeping your phone within 30 feet of your Fitbit, restart the app after each use, and make sure your phone's Bluetooth is set to stay on even when the screen is off. Check your phone's battery saver settings — some phones turn off Bluetooth to save power.
How long does it take for a Fitbit to sync after I resync it?
A fresh sync usually takes two to five minutes if your Fitbit has recent data. If your Fitbit has not synced in days or weeks, it may take ten to fifteen minutes to send all stored data. Keep the app open and your phone near the device until you see the sync complete.
Can I resync my Fitbit on a different phone?
Yes. read the Fitbit app on the new phone, sign in with your email and password, and the app will find your existing Fitbit and sync to it. You can then remove the old phone from your account in the app settings. Only one phone should be your primary sync device to avoid connection conflicts.