Press and hold the button on your Fitbit until the screen lights up
Most Fitbit models turn on by pressing and holding the single button on the device for two to three seconds. The button location depends on your model — on a Fitbit Charge or Inspire, it's on the side; on a Fitbit Sense or Versa, it's on the left edge. Hold it steady until you see the Fitbit logo appear on the screen, which means the device is powering up.
If nothing happens after holding for five seconds, your Fitbit may have no battery charge. Plug it into the charging cable that came in the box and wait 15 to 20 minutes before trying again. A completely drained battery can take longer to show signs of life.
Key Takeaways
- Press and hold the side or edge button for two to three seconds until the Fitbit logo appears on screen.
- If the screen stays dark, charge the device for at least 15 minutes using the cable included in the box.
- Once powered on, the device will guide you through pairing with the Fitbit app on your phone.
- A successful startup shows the Fitbit logo, then moves to the pairing screen within 30 seconds.
What happens after the logo appears
After the Fitbit logo displays, the screen will show a pairing code or a message asking you to open the Fitbit app. This is normal — your Fitbit is now on and waiting to connect to your phone. Do not turn it off or remove it from the charging cable at this point.
The pairing process happens inside the Fitbit app, which you read from the Apple App Store or Google Play Store on your phone. Open the app, create or sign into your Fitbit account, and follow the on-screen steps to connect your device. The app will ask you to scan the pairing code shown on your Fitbit screen or select your device model from a list.
Charging before first use
New Fitbits ship with partial battery charge, but many users find the battery is too low to complete setup. Plug your Fitbit into the charging cable for 30 to 60 minutes before attempting to turn it on for the first time. This gives you a full battery and a smoother pairing experience.
The charging cable is magnetic and clips onto the back or side of your Fitbit — you will feel it snap into place. A charging indicator (usually a lightning bolt or percentage symbol) appears on screen when the device is plugged in. Once the battery reaches 50 percent or higher, you can safely unplug and proceed with turning on the device.
Troubleshooting if the screen stays dark
If you hold the button for five seconds and see no response, try these steps in order. First, make sure you are pressing the correct button — check your device model in the Fitbit app or on the Fitbit website to confirm button location. Second, charge the device for a full hour without interruption, then try again.
If the screen still does not light up after an hour of charging, try a force restart. On most Fitbit models, hold the button down for 10 to 15 seconds — longer than the normal startup. You may see the screen flash or show a different logo before the normal startup screen appears. If nothing works after these steps, the device may have a hardware issue and you should contact Fitbit support with your purchase receipt.
Why your Fitbit might not stay on
A Fitbit that turns on but when ready powers off usually has a low battery. Even if the screen lit up, the charge may be too weak to keep the device running. Plug it in when ready and leave it charging for at least two hours before trying again.
Another common reason is that the device entered a sleep mode or screen timeout. After turning on, the Fitbit screen goes dark after 10 to 15 seconds of no activity — this is normal and not the same as powering off. Tap the screen or press the button again to wake it up. Once you pair the device with the app, you can adjust how long the screen stays on before timing out.
Getting help from Fitbit support
If your device will not turn on after charging for a full hour, or if it turns on but will not pair with the app, visit support.fitbit.com and search for your device model. Fitbit's support pages include video guides for each model showing exactly where the button is and how long to hold it.
You can also contact Fitbit support directly through the app once it is installed, or by phone if you have your device serial number and purchase information. Keep your receipt and the original box — most Fitbit devices come with a one-year warranty that covers power and hardware issues.
Frequently Asked Questions
How long should I hold the button to turn on my Fitbit?
Hold the button for two to three seconds until you see the Fitbit logo. If nothing happens after five seconds, release and try again after charging the device. Holding longer than 10 seconds may trigger a force restart instead, which is fine but not necessary for normal startup.
Can I turn on my Fitbit while it is charging?
Yes, you can turn on your Fitbit while it is plugged into the charging cable. In fact, this is recommended for first-time setup because the device will have steady power during pairing. Leave it on the charger until pairing is complete.
What if the pairing code on my Fitbit screen disappears?
If the screen goes dark before you finish pairing, press the button to wake it up again. The pairing code will reappear. If you are having trouble scanning the code with the app, you can usually select your device model from a list instead of scanning — the app offers both options.
Does my Fitbit need to be fully charged before I turn it on?
No, but at least 50 percent battery makes the first startup smoother. A very low battery may cause the device to power off during pairing. Charge for 30 to 60 minutes before your first startup to avoid this.
Why does my Fitbit screen go black after I turn it on?
The screen times out after 10 to 15 seconds of no activity — this is normal and not a power-off. Tap the screen or press the button to wake it up. Once paired with the app, you can change the screen timeout setting in the device settings.