Sync Your Fitbit to Apple Health Through the Fitbit App

You sync a Fitbit to Apple Health by turning on the connection inside the Fitbit app itself — Apple Health does not pull data directly from Fitbit. Open the Fitbit app on your iPhone, go to your profile settings, find the "Apps" or "Connected Apps" section, and look for Apple Health. Toggle it on, then confirm that Fitbit can send data to Apple Health when prompted. The connection happens in the background after that, and your daily steps, heart rate, calories burned, and other metrics flow into Apple Health automatically.

This one-time setup takes about two minutes. After you turn it on, you do not have to do anything else — the sync happens without you opening either app. Data typically appears in Apple Health within a few minutes of being recorded on your Fitbit device.

Key Takeaways

  • The Fitbit app controls the connection to Apple Health, not the other way around — you must enable it in Fitbit's settings.
  • Your Fitbit must be paired to your iPhone first; syncing to Apple Health does not work if Fitbit is only connected to an Android phone.
  • Steps, heart rate, calories, distance, and active minutes transfer automatically once the connection is on.
  • If data stops appearing in Apple Health, check that Fitbit still has permission to access Apple Health in your iPhone's Settings app under Privacy.

Step-by-Step Setup Instructions

Start by opening the Fitbit app on your iPhone. Tap the profile icon in the bottom right corner to enter your account settings. Look for a section labeled "Apps," "Connected Apps," or "App Connections" — the exact name varies depending on your Fitbit model and app version.

Scroll down in that section until you see "Apple Health" listed. Tap it, then toggle the switch to the on position. Your iPhone will ask you to confirm that the Fitbit app can write data to Apple Health. Tap "Allow" or "Turn On" to complete the connection. That is all you need to do — the sync is now active.

If you do not see Apple Health listed in your connected apps, make sure your Fitbit app is up to date. Open the App Store, search for Fitbit, and tap "Update" if one is available. Close the Fitbit app completely and reopen it, then check the settings again.

What Data Transfers to Apple Health

Once syncing is on, Fitbit sends the following information to Apple Health: steps taken, distance traveled, calories burned, active minutes, heart rate, and sleep data (if your Fitbit tracks sleep). The data appears under the corresponding categories in the Apple Health app — open Health, tap the "Browse" tab, and you will see Fitbit listed as a source under each metric.

Not all Fitbit models track the same metrics. For example, basic Fitbit models may only track steps and calories, while advanced models record heart rate variability and blood oxygen. Only the data your specific Fitbit records will appear in Apple Health.

Troubleshooting When Data Does Not Appear

If you turned on the Apple Health connection but data is not showing up, first check that your Fitbit device is synced to the Fitbit app. Open the Fitbit app and look at the home screen — if your device shows as "Synced" or displays today's data, the device connection is working. If it says "Syncing" or shows no data, tap the device name and manually sync it by pulling down on the screen.

Next, verify that the Fitbit app has permission to access Apple Health on your iPhone. Go to Settings, scroll down to Fitbit, tap it, and look for "Health" in the list of permissions. Make sure it is toggled on. If it is off, turn it on and return to the Fitbit app to re-enable the Apple Health connection.

If the connection is on and permissions are set correctly but data still is not appearing, try signing out of the Fitbit app and signing back in. Open Fitbit, go to your profile, scroll to the bottom, and tap "Sign Out." Wait 30 seconds, then sign back in with your Fitbit account. Once you are logged back in, check the Apple Health connection again to make sure it is still enabled.

Why Your Fitbit Might Disconnect From Apple Health

The most common reason the connection drops is that you signed out of your Fitbit account or uninstalled and reinstalled the Fitbit app. Both actions clear the Apple Health permission. If this happens, straightforward turn the connection back on in the Fitbit app settings — you do not need to set up anything new in Apple Health itself.

Occasionally, an update to either the Fitbit app or iOS will reset the connection. If you notice data has stopped flowing into Apple Health after updating either one, open the Fitbit app and toggle the Apple Health connection off and back on. This usually restores the sync within a few minutes.

If you change your iPhone or restore it from a backup, the Apple Health connection may not transfer. After setting up your new phone, open the Fitbit app, re-pair your Fitbit device, and turn the Apple Health connection back on in settings.

Using Your Synced Data in Apple Health

Once data is flowing into Apple Health, you can view it all in one place alongside data from other sources. Open the Health app, tap "Browse," and select any category — Steps, Heart Rate, Active Energy, or Sleep. You will see Fitbit listed as a data source, along with any other apps or devices sending information to Apple Health.

You can also set up the Health app to show Fitbit data on your home screen. Tap "Summary" at the bottom, then tap the plus sign to add a card. Search for the metric you want to track — Steps, for example — and add it. The card will now show your Fitbit data every time you open Health.

If you use other health apps that read from Apple Health, they will now have access to your Fitbit data as well. This means apps like MyFitnessPal, Strava, or third-party sleep trackers can pull your steps, heart rate, and other metrics directly from Apple Health without needing a separate Fitbit connection.

Frequently Asked Questions

Can I sync a Fitbit to Apple Health if I use an Android phone?

No. Apple Health only works on iPhones and iPads. If your primary phone is Android, you can still pair your Fitbit to Android and use Google Fit instead. If you own both an iPhone and an Android phone, you can pair your Fitbit to the iPhone and enable Apple Health syncing there, and the data will appear in Apple Health on that device.

Does syncing to Apple Health drain my Fitbit battery faster?

No. The sync happens through your iPhone's Bluetooth connection, not your Fitbit's battery. Syncing to Apple Health uses the same amount of power as syncing to the regular Fitbit app, so there is no additional battery drain.

Can I see historical Fitbit data in Apple Health, or only new data going forward?

Once you turn on the connection, Apple Health typically shows data from the past 30 days or so, depending on your Fitbit model. Older data remains in the Fitbit app but does not transfer to Apple Health retroactively. Going forward, all new data syncs automatically.

What happens to my data in Apple Health if I disconnect my Fitbit?

The data already in Apple Health stays there — disconnecting Fitbit does not delete it. However, new data from your Fitbit will stop appearing in Apple Health. If you reconnect later, new data will resume syncing, but the gap between disconnection and reconnection will not be filled in.

Can I sync multiple Fitbits to the same Apple Health account?

Yes. If you have more than one Fitbit device paired to the same Fitbit account, all of them will send data to Apple Health once you enable the connection. Apple Health will combine the data from all devices, so your step count, for example, will reflect activity from whichever Fitbit you are wearing.