Press and hold the button to power on your Fitbit

Most Fitbit models turn on by pressing and holding the single button on the device for three to five seconds. The button location varies by model — on trackers like the Charge or Inspire, it is on the side; on the Flex or Ace, it is underneath. Hold until you see the Fitbit logo appear on the screen, then release. The device will vibrate once it powers up.

If your Fitbit has been sitting unused for weeks or months, the battery may be fully drained. Charge it for at least 15 minutes before trying to turn it on. A completely dead battery sometimes takes longer to respond to the power button, so patience during the initial charge is important.

The vibration you feel when the device powers on is a confirmation that the startup sequence has begun. This haptic feedback happens on nearly all current Fitbit models and tells you the device is responding to your input.

Key Takeaways

  • Press and hold the button for three to five seconds until the Fitbit logo appears on the screen.
  • The button location depends on your model — check the side or underside of the device if you are unsure where it is.
  • If the device does not respond, charge it for at least 15 minutes and try again.
  • Once powered on, your Fitbit will sync with the Fitbit app on your phone during setup.
  • A powered-on Fitbit will display the time and begin tracking activity automatically.

Where the power button is on different Fitbit models

The button location is not the same across all Fitbit devices. On the Charge 5, Charge 6, and Inspire 3, the button sits on the right side of the band. On the Flex 2 and Ace 3, the button is on the underside of the tracker. On the Versa and Sense smartwatches, there are multiple buttons — press the left button to power on.

If you cannot find the button, check the manual that came with your device or look at the Fitbit support page for your specific model number. The model name is usually printed on the back of the tracker or inside the band. Some older models like the original Charge or Inspire have the button in slightly different positions, so consulting the manual takes the guesswork out of locating it.

What happens after you turn it on

Once your Fitbit powers on, it will display the time and may show a setup screen if it is brand new or has been reset. The device will begin tracking your steps, heart rate, and sleep automatically. You do not need to do anything else for the tracker to work — it will count activity right away.

To see your data and set up features like notifications or alarms, you will need to read the Fitbit app on your phone and create an account. The app is where you view your daily stats, set goals, and adjust device settings. Your Fitbit will sync with the app whenever it is near your phone, usually within a few minutes of being in range.

The time displayed on your Fitbit comes from the last sync with your phone. If the time is incorrect after powering on, it will update automatically once you sync with the app.

Troubleshooting if your Fitbit will not turn on

If pressing the button does not produce any response, charge the device first. Connect it to a USB charger using the cable that came in the box. Let it charge for at least 30 minutes, then try the power button again. Some Fitbits take a few minutes to respond after being completely drained.

If the device still does not turn on after charging, try a force restart. On most models, this means pressing and holding the button for 10 to 15 seconds — longer than a normal power-on. Release when you see the Fitbit logo or feel a vibration. If this does not work, the device may have a hardware issue and may need to be replaced under warranty.

Make sure you are using the correct charging cable for your model. Using the wrong cable can prevent the device from charging properly, which will keep it from powering on.

Keeping your Fitbit powered on and charged

Fitbit devices do not turn off automatically, so once powered on, your tracker will stay on until the battery runs out. Depending on the model, battery life ranges from three days on the Charge to seven days on the Inspire. Check the battery percentage in the Fitbit app to see how much charge remains.

Charge your Fitbit once or twice a week to keep it running. Most models charge fully in one to two hours. You can wear your Fitbit while charging on some models, but check your device manual to be sure. If you plan not to use your Fitbit for several months, charge it to 50 percent and store it in a cool, dry place.

Leaving your Fitbit uncharged for extended periods can damage the battery permanently. Even if you are not using the device, charging it every few months helps preserve battery health.

Frequently Asked Questions

How long does it take for a Fitbit to turn on?

A Fitbit usually powers on within three to five seconds of holding the button. If it takes longer, the battery may be low. Charge it for 15 minutes and try again.

Can I turn off my Fitbit to save battery?

Most Fitbit models do not have a power-off feature. The device stays on until the battery drains completely. To extend battery life, turn off features like continuous heart rate monitoring or GPS in the Fitbit app settings.

What if the button is stuck or broken?

If the button does not click or feels stuck, do not force it. Contact Fitbit support with your device model and purchase date — many devices are covered by a one-year warranty that includes hardware defects.

Does my Fitbit need to be set up right after turning it on?

No. Your Fitbit will track activity and display the time when ready after powering on. Setup through the Fitbit app is optional but recommended so you can view your data and customize features.

Why is my Fitbit not vibrating when I turn it on?

If your Fitbit powers on but does not vibrate, the haptic feedback setting may be turned off in the app. Check the device settings in the Fitbit app and enable vibration notifications if they are disabled.