The basic power button method
Most Fitbit models turn on and off using a single button press or a specific button combination. The exact method depends on which Fitbit you own — the location and number of button presses varies between trackers, watches, and older models.
To find your device's power button, look at the side or bottom edge of your tracker. On many Fitbit trackers, there is a single button on the side. On Fitbit smartwatches like the Sense or Versa series, the power button is usually on the right side of the watch face. Press and hold this button for several seconds until you see the Fitbit logo appear on the screen — this signals the device is powering on.
To turn the device off, press and hold the same button again until you see a power-off screen or the device vibrates and goes dark. Some models show a confirmation message asking if you want to power off; if yours does, press the button again to confirm.
Key Takeaways
- The power button is located on the side or bottom of your Fitbit; press and hold it for several seconds to turn the device on or off.
- You will see the Fitbit logo when the device powers on, and the screen will go dark when it powers off.
- Older Fitbit models and newer smartwatches may have slightly different button locations, so check your device manual if the side button does not work.
- Restarting your Fitbit by turning it off and back on can fix common issues like a frozen screen or lost connection to your phone.
Where to find the power button on different Fitbit models
Fitbit Charge and Inspire series: The power button is on the left side of the tracker. Press and hold for three seconds to power on; press and hold for three seconds again to power off.
Fitbit Sense and Versa smartwatches: The power button is on the right side of the watch case. Hold it down until the Fitbit logo appears (about three to five seconds). To turn off, hold the button again until you see the power-off screen, then press to confirm.
Fitbit Ace (kids' tracker): The power button is on the back of the device. Press and hold for three seconds to turn on or off.
If you cannot locate the button or your model does not respond to button presses, check the manual that came with your device or visit the Fitbit support website and search for your specific model number.
What happens when you power off your Fitbit
When you turn off your Fitbit, the screen goes dark and the device stops tracking activity, heart rate, and sleep. Any data recorded before you powered off remains stored on the device and will sync to the Fitbit app the next time you turn it back on and connect to your phone.
Powering off does not erase your data. It straightforward puts the device into a low-power state. You might power off your Fitbit if you are sending it for repair, storing it for a long time, or troubleshooting a problem.
Restarting your Fitbit to fix common problems
If your Fitbit screen is frozen, not responding to taps, or will not connect to your phone, a restart often solves the issue. To restart, turn the device off completely, wait 10 seconds, then turn it back on. You should see the Fitbit logo appear on the screen.
A restart clears the device's temporary memory without erasing your stored data or settings. If your Fitbit still does not work after a restart, try charging it for at least one hour, then restart again. If the problem continues, you may need to unpair the device from the Fitbit app and set it up again from scratch.
Charging your Fitbit while it is powered on
You do not need to turn off your Fitbit to charge it. Most Fitbit models charge while powered on, and the device will continue to track activity during charging. The screen may dim or show a charging indicator, but the tracker remains active.
If you prefer to charge with the device off, you can power it down before connecting the charger. Either way works fine — there is no performance benefit to charging while powered off.
When your Fitbit will not turn on
If you press and hold the power button and nothing happens, the battery is likely completely drained. Connect your Fitbit to its charger and leave it plugged in for at least 30 minutes. Some devices take longer to show signs of life after a complete power drain.
While charging, you may see a charging icon or animation appear on the screen. Once the battery has some charge, try pressing the power button again. If the device still does not respond after an hour of charging, try a force restart: press and hold the power button for 10 to 15 seconds, even if nothing appears on screen, then release and wait a few seconds.
If your Fitbit remains unresponsive after charging and a force restart, contact Fitbit support — the device may have a hardware issue.
Frequently Asked Questions
Does turning off my Fitbit erase my data?
No. Powering off your Fitbit does not erase any data. All activity, heart rate, and sleep information recorded before you powered off stays on the device and syncs to the Fitbit app when you turn it back on and reconnect to your phone.
How long does it take to turn a Fitbit on or off?
It usually takes three to five seconds of holding the power button before you see the Fitbit logo (for power on) or the power-off screen (for power off). If nothing happens after 10 seconds, release the button and try again.
Can I turn my Fitbit off while it is charging?
Yes, you can power off your Fitbit while it is connected to the charger. The device will continue to charge whether it is on or off. There is no advantage to charging while powered off.
What should I do if my Fitbit is stuck on the Fitbit logo screen?
If the logo appears but the device does not fully boot up, try a force restart: hold the power button for 10 to 15 seconds, release it, and wait 30 seconds. If the screen remains stuck, charge the device for one hour and try again.
Is there a difference between powering off and putting my Fitbit in sleep mode?
Yes. Powering off completely stops tracking and turns off the screen. Sleep mode is automatic — your Fitbit enters it when you are not moving, but the device continues to track and the battery drains slowly. You control power off; sleep mode happens on its own.