Press and hold the button to power on your Fitbit
Most Fitbit models turn on by pressing and holding the single button on the device for three to five seconds. The button location depends on your model — on trackers like the Charge or Inspire, it's on the side; on watches like the Versa, it's typically on the left edge. You'll see the Fitbit logo appear on the screen, followed by a startup sequence that takes about 10 to 15 seconds.
If your Fitbit has been off for a while or the battery is completely drained, it may take longer to respond. Keep holding the button even if nothing happens when ready — some devices need a full five seconds of pressure before they wake up.
Once the logo disappears and you see the home screen or clock face, your device is on. If you see a low battery icon or a message asking you to charge, your Fitbit powered on but needs to be plugged in before you can use it fully.
Key Takeaways
- Press and hold the button on your Fitbit for three to five seconds until you see the Fitbit logo appear on the screen.
- The button location varies by model — check the side of trackers or the left edge of watches.
- If your device doesn't respond, it may have a completely drained battery and will need to charge before it fully powers on.
- A low battery message means your Fitbit is on but needs charging to function properly.
Charging your Fitbit if the battery is dead
If you press the button and nothing happens at all — no logo, no vibration, no screen response — your battery is likely completely empty. Connect your Fitbit to its charging cable (usually a magnetic dock or USB cable specific to your model) and plug it into a power source. Leave it connected for at least 30 minutes before trying to turn it on again.
While charging, you may see a charging icon or animation on the screen. Some models show a lightning bolt or a battery symbol. Once the battery has enough charge, you can press the button again to complete the startup sequence.
What to do if your Fitbit won't turn on after charging
If your device still won't power on after charging for an hour, try a force restart. On most Fitbit models, this means pressing and holding the button for 10 to 15 seconds — longer than a normal startup. You may see the screen flash or vibrate before the logo appears. Release the button and wait for the device to finish booting.
If a force restart doesn't work, your Fitbit may have a hardware problem. Check the charging contacts on both the device and the cable for dirt or corrosion — wipe them gently with a dry cloth and try charging again. If the device still won't respond after a full charge and a force restart, contact Fitbit support through their website or app for troubleshooting specific to your model.
Turning on your Fitbit after it's been stored
If your Fitbit has been in a drawer or storage for weeks or months, the battery may have drained completely. Charge it for at least an hour before attempting to turn it on. Once it has charge, press and hold the button as you normally would.
After a long storage period, your Fitbit may take slightly longer to boot up or may ask you to reconnect it to the Fitbit app on your phone. This is normal — the device is straightforward re-establishing its connection to your account.
Understanding the startup screen
When you first turn on your Fitbit, you'll see the Fitbit logo for a few seconds, then the device will show either a clock face, a home screen with your stats, or a setup screen if it's a new device. If you see a setup screen, follow the on-screen prompts or open the Fitbit app on your phone to complete pairing with your account.
If your device shows a clock or home screen right away, it's already paired and ready to use. You can navigate between screens by pressing the button or swiping, depending on your model.
Frequently Asked Questions
How long does it take for a Fitbit to turn on?
A normal startup takes about 10 to 15 seconds from the moment you press the button until the home screen appears. If it takes longer than 30 seconds, release the button and try again — you may not have held it long enough.
What if my Fitbit vibrates but the screen stays black?
A vibration without a screen response usually means the device is on but the display isn't working. Try pressing the button a few times to navigate the screen, or perform a force restart by holding the button for 10 to 15 seconds. If the screen remains black after a restart, the display may need repair.
Can I turn on my Fitbit without the button?
No — the button is the only way to power on a Fitbit. There is no voice command, app button, or alternative method. If your button is broken or stuck, you'll need to contact Fitbit support or replace the device.
Does my Fitbit turn on automatically when I put it on?
No. Fitbit devices do not have motion sensors that trigger power-on. You must press the button to turn it on. Once it's on, it stays on until the battery drains or you manually turn it off (if your model has that option).