The fastest way to power down your Fitbit

To turn off most Fitbit watches, press and hold the button on the left side of the device for about 10 seconds until you see the Fitbit logo appear on the screen, then release. The screen will go black and the watch will power down completely. This works on Fitbit Sense, Sense 2, Versa 3, Versa 4, and most other Fitbit watch models.

If your Fitbit has a side button that feels stiff or doesn't respond, try pressing it firmly and holding for the full 10 seconds without releasing early. Sometimes a partial press will just wake the screen instead of shutting the device down.

On some older Fitbit models like the Ionic, the power-off sequence is the same: hold the left button for about 10 seconds until the logo appears. If you're not sure which button is which, the left side of your watch should have a single button or a button with a line through it.

Key Takeaways

  • Press and hold the left side button for 10 seconds until the Fitbit logo appears, then release to power off your watch.
  • The screen will go completely black when the device shuts down, which is different from the normal sleep mode that happens when you don't use it.
  • Turning off your Fitbit is useful when you're not wearing it for extended periods or troubleshooting connection problems.
  • Restarting your Fitbit by turning it off and back on can fix syncing issues, frozen screens, or unresponsive buttons.

Why you might want to power down your Fitbit

You don't need to turn off your Fitbit every day—the watch enters a low-power sleep mode automatically when you're not using it. However, powering it down completely is useful in a few situations. If your Fitbit isn't syncing with your phone, isn't responding to button presses, or the screen is frozen, a full restart often fixes the problem.

Turning off your watch is also practical if you're storing it for a while and want to preserve the battery. A powered-off Fitbit uses almost no battery, whereas a watch in sleep mode will slowly drain over weeks or months. If you're taking a break from wearing your device for more than a few weeks, powering it down keeps the battery from dying completely.

Turning your Fitbit back on

To restart your Fitbit after powering it off, press the left side button once. The Fitbit logo will appear on the screen, and the watch will boot up. This usually takes 5 to 10 seconds. Once you see the clock face or your normal watch display, the device is fully powered on.

After restarting, your Fitbit will reconnect to your phone automatically if Bluetooth is turned on and the Fitbit app is running in the background. If it doesn't sync right away, open the Fitbit app on your phone and manually sync by pulling down on the screen (on most phones) or tapping the sync button.

What to do if the button won't respond

If pressing the left button doesn't turn off your Fitbit, the button may be stuck or the device may be frozen. Try pressing the button firmly and deliberately, making sure you're pressing straight in rather than at an angle. Hold it for the full 10 seconds even if nothing seems to happen at first.

If the button still doesn't work, your Fitbit may need a hard reset. Plug the watch into its charging cable and let it charge for at least 15 minutes. While it's charging, try pressing the button again. If the device still won't respond after charging, contact Fitbit support through the Fitbit app or visit the Fitbit website for troubleshooting specific to your model.

The difference between sleep mode and power off

Your Fitbit enters sleep mode automatically when you stop using it—the screen goes dark and the watch uses very little power. You can wake it by pressing the button or tilting your wrist (if that feature is turned on). Sleep mode is the normal state for a watch you're wearing regularly.

Power off is a complete shutdown. The watch uses almost no battery and won't respond to button presses or wrist tilts until you press the button to turn it back on. Use power off when you're storing the device or troubleshooting problems, not during normal daily use.

Troubleshooting after a restart

After you turn your Fitbit back on, check that it's working properly by opening the Fitbit app on your phone. The app should show your watch as connected. If it still shows as disconnected, try turning off Bluetooth on your phone, waiting 10 seconds, and turning it back on. Then open the Fitbit app again.

If your watch still won't sync after a restart and a Bluetooth reset, the next step is to unpair and re-pair the device. In the Fitbit app, go to your device settings, scroll down, and select "Unpair Device." Then follow the setup steps to pair your Fitbit again as if it were new. This usually takes a few minutes and will restore the connection.

Frequently Asked Questions

Will turning off my Fitbit erase my data?

No. Powering off your Fitbit does not delete any data. All your steps, heart rate, sleep records, and other information stored on the device will still be there when you turn it back on. The data is saved to the device's memory and is not affected by shutting down.

How long does the battery last when the Fitbit is powered off?

A powered-off Fitbit can hold its charge for several months because the device uses almost no power in the off state. If you're storing your watch for an extended period, turning it off is a good way to keep the battery from draining completely.

Can I turn off my Fitbit without using the button?

No. The physical button on the left side is the only way to power off your Fitbit. There is no menu option or app setting to shut down the device remotely. You must have the watch in your hand to turn it off.

What if my Fitbit won't turn back on after I power it off?

Plug your Fitbit into its charging cable and let it charge for at least 30 minutes. A completely drained battery may not respond to button presses. Once it has charged, try pressing the button again. If it still won't turn on, contact Fitbit support.

Does turning off my Fitbit stop it from tracking my activity?

Yes. When your Fitbit is powered off, it is not tracking steps, heart rate, or any other activity. The device only records data when it is turned on and being worn. Turn your Fitbit back on before you want to resume tracking.