The quickest way to power down your Versa 2
To turn off your Fitbit Versa 2, press and hold the back button (the single button on the left side of the watch) for about three seconds until you see a power menu appear on the screen. A menu with options will show up — tap "Power Off" to shut down the device completely.
The entire process takes less than ten seconds. Your watch will go dark and stop responding to taps or button presses once it powers down. When you want to use it again, press any button to wake it up, and it will restart normally.
Key Takeaways
- Press and hold the back button (left side) for three seconds to open the power menu on your Versa 2.
- Tap "Power Off" from the menu that appears to shut down the watch completely.
- The watch will not respond to any input once powered off, and you can restart it by pressing any button.
- Powering off is different from putting the watch in sleep mode, which happens automatically when you're not using it.
- A full power-down is useful before long trips, during storage, or when troubleshooting connection problems.
When you should power off your Versa 2
Most of the time, your Versa 2 doesn't need to be turned off. The watch enters sleep mode automatically when you're not actively using it, which saves battery without requiring any action from you. However, there are situations where a full power-down is helpful.
Turn off your watch before traveling by air, since some airlines ask passengers to disable wireless devices during flight. You should also power it down if you're storing the watch for an extended period — this prevents the battery from slowly draining while it sits unused. If your Versa 2 is acting up, freezing, or not syncing with your phone, powering it off and back on often fixes the problem.
The difference between power off and sleep mode
Your Versa 2 automatically enters sleep mode when you lower your wrist or stop interacting with the screen. In sleep mode, the display goes dark and the watch uses very little power, but it stays on and continues to track your activity and heart rate in the background. You can wake it when ready by raising your wrist or tapping the screen.
Power off is a complete shutdown. The watch stops all functions, including activity tracking and heart rate monitoring, and uses almost no battery. Restarting takes a few seconds longer than waking from sleep mode. Use sleep mode for everyday use and power off only when you need the watch completely inactive.
Restarting your Versa 2 after powering it off
Once your watch is off, restart it by pressing any button on the device. The Fitbit logo will appear on the screen, and the watch will take about 10 to 15 seconds to fully boot up. During this time, you'll see a loading screen — wait until the watch face appears before trying to use it.
After restarting, your Versa 2 will reconnect to your phone automatically if Bluetooth is turned on and your phone is nearby. This reconnection usually happens within a minute. If your watch doesn't sync right away, open the Fitbit app on your phone and wait a few more seconds for the connection to establish.
Troubleshooting if the power menu won't appear
If you hold the back button and nothing happens, the battery may be completely drained. Plug your Versa 2 into its charging cable and let it charge for at least 15 minutes before trying again. A watch with no power cannot respond to button presses.
If the watch has charge but the power menu still won't show, try holding the back button for a full five seconds instead of three. Sometimes a longer press is needed. If the menu appears but the watch won't shut down after tapping "Power Off," try the process again — occasionally the tap doesn't register on the first attempt.
Battery life after powering off and back on
Turning your Versa 2 off and on does not harm the battery or reduce how long it holds a charge. The watch is designed to power cycle without damage. In fact, a full power-down and restart can sometimes improve battery performance if the watch has been running for a very long time without restarting.
Your Versa 2 battery normally lasts four to five days between charges during regular use. This doesn't change based on how many times you power the watch off. If you notice your battery draining much faster than usual after a restart, check that background app syncing is turned on in your Fitbit app settings, as this can affect battery life.
Frequently Asked Questions
Will turning off my Fitbit Versa 2 erase my data?
No. Powering off your watch does not delete any data. All your activity history, settings, and personal information remain stored on the device. When you turn it back on, everything will be exactly as you left it.
Can I turn off my Versa 2 from the Fitbit app on my phone?
No. The Fitbit app does not have a remote power-off option. You must physically press and hold the back button on the watch itself to access the power menu. This is a safety feature to prevent accidental shutdowns.
How long does it take to power off the Versa 2?
The watch shuts down almost when ready after you tap "Power Off" from the menu. The screen goes dark within one second. The entire process from pressing the back button to complete shutdown takes less than five seconds.
What should I do if my Versa 2 is frozen and won't respond to button presses?
If the watch is completely unresponsive, you can force a restart by holding the back button for 10 to 15 seconds. This performs a hard reset that bypasses the normal power menu. The watch will restart automatically, and you'll see the Fitbit logo appear on the screen.
Is it bad to leave my Versa 2 powered off for weeks?
No. Your watch can safely remain powered off for extended periods. Before turning it back on after a long time, charge it fully to may support it has enough power to complete the startup process. Once it's on, it will sync with your phone and resume normal operation.