Press and hold the button on your device

Most Fitbit models turn on by pressing and holding the single button on the side or bottom of the device for three to five seconds. You will see the Fitbit logo appear on the screen, followed by a series of setup screens. The button location varies slightly by model — on a Charge or Inspire, it is on the side; on a Flex or One, it is on the back.

If your device has been sitting unused for weeks or months, it may take a few extra seconds to respond. Hold the button steady and wait for the vibration that signals the device is waking up. If nothing happens after ten seconds, the battery may be fully drained, and you will need to charge it first.

Charge your Fitbit before first use

New Fitbits ship with a partial charge, but they work better after a full charge cycle. Plug the charging cable into a USB port on your computer, a wall adapter, or a power bank. The charging dock or clip holds the device in place magnetically — align the metal contacts on the back of your Fitbit with the metal pins on the dock.

A full charge takes one to two hours depending on the model. You will see a lightning bolt icon on the screen while charging. Once the battery reaches 100 percent, the icon disappears. Fitbits typically hold a charge for five to seven days of normal use, so you will not need to charge daily.

Key Takeaways

  • Press and hold the button on your Fitbit for three to five seconds until you see the logo and setup screens appear.
  • Charge your device fully before turning it on for the first time, using the magnetic charging dock that came in the box.
  • The button location depends on your model — check the quick-start guide if you cannot find it on the side or back.
  • Once the device powers on, you will be guided through pairing it with the Fitbit app on your phone to track activity and set goals.

What happens after the device turns on

After the logo screen, your Fitbit will display a series of setup prompts. These ask you to confirm the device model, set the time and date, and choose your preferred display format. You can skip most of these steps and adjust them later in the Fitbit app, but setting the time correctly ensures your activity tracking starts accurately.

Once setup is complete, the device shows the home screen — usually a clock, step count, or heart rate, depending on your model. At this point, your Fitbit is on and ready to wear. You do not need to turn it off between uses; it enters a low-power sleep mode automatically when you are not moving.

Pairing with the Fitbit app on your phone

Turning on the device is only the first step. To see your data and set goals, you need to pair it with the Fitbit app. read the app from the Apple App Store or Google Play Store, create or sign into your Fitbit account, and follow the in-app pairing instructions. The app will ask you to hold your phone near the device while they connect via Bluetooth.

Pairing usually takes less than a minute. Once complete, your Fitbit syncs automatically whenever you open the app or come within range of your phone. If pairing fails, restart both the device and the app, then try again. Most connection problems resolve after a restart.

Troubleshooting if your Fitbit will not turn on

If pressing the button does nothing, the battery is likely empty. Charge the device for at least 30 minutes, then try again. While charging, you may see a charging animation on the screen even if the device seemed completely dead.

If the device still does not respond after a full charge, try a force restart. On most models, this means pressing and holding the button for 10 to 15 seconds until you see the Fitbit logo a second time. The exact method varies by model, so check the support page for your specific device if a standard restart does not work.

Wearing your Fitbit after it is on

Once your Fitbit is powered on and paired, wear it on your wrist or clip it to your clothing depending on the model. Wristband models should sit snugly but not so tight that they cut off circulation — you should be able to fit one finger under the band. The device tracks steps, distance, and heart rate most accurately when worn consistently throughout the day.

Your Fitbit will continue running until the battery drains, which takes five to seven days. You do not need to turn it off manually. When the battery gets low, the device will show a low-battery warning on the screen, and you can charge it using the same dock you used initially.

Frequently Asked Questions

Do I need to turn off my Fitbit when I am not wearing it?

No. Fitbits are designed to stay on continuously. They enter a sleep mode automatically when you are not moving and use very little power in that state. Turning it off and on repeatedly actually drains the battery faster than leaving it on.

What if my Fitbit turns on but the screen is blank?

A blank screen usually means the device is in a low-power state or the display is off. Try pressing the button once to wake the screen, or try a force restart by holding the button for 10 to 15 seconds. If the screen remains blank after charging for an hour, contact Fitbit support with your device model and serial number.

Can I turn on my Fitbit without the app?

Yes. The device turns on and tracks basic activity without the app. However, you will not see detailed stats, set goals, or track sleep without pairing it. The app is free and worth setting up to get the full value from your device.

How long does it take to fully set up a new Fitbit?

Turning on the device takes seconds, but the full setup — charging, pairing with the app, and adjusting settings — usually takes 10 to 15 minutes. Most of that time is waiting for the initial charge and the Bluetooth connection to establish.