Press and hold the button on the back to power on

The Fitbit Alta powers on by pressing and holding the single button located on the back of the device, near the bottom edge. Hold the button for about three seconds until you see the Fitbit logo appear on the screen. The device will vibrate slightly when it powers on, and the display will light up.

If the screen does not light up after holding the button, the battery may be depleted. Charge the Alta using the included USB charging cable by connecting the device to a computer, wall adapter, or any standard USB power source. A full charge typically takes one to two hours.

Once powered on, the Alta will display the time and begin tracking your activity. You do not need to set it up again if you have already paired it with the Fitbit app on your phone — it will reconnect automatically when it detects your phone nearby.

Key Takeaways

  • Press and hold the button on the back of the Alta for three seconds to turn it on.
  • You will see the Fitbit logo and feel a vibration when the device powers on successfully.
  • If the screen stays dark, charge the device using the included USB cable for one to two hours.
  • The Alta will reconnect to the Fitbit app automatically once it is powered on, with no additional setup needed.

What to do if the button does not respond

If you hold the button and nothing happens, the battery is likely completely empty. Even a dead Alta will show no response — no vibration, no logo, no screen activity. Plug the device into a charger when ready and wait at least 15 to 20 minutes before trying again. Some users find that the Alta needs a longer initial charge before it will respond to the power button.

If the device still does not power on after charging for an hour, try a different USB cable or power source. Occasionally a cable connection is loose or a port is not delivering power. Once you confirm the device is charging (you may see a small charging indicator on the screen), wait another 30 minutes and press the button again.

Understanding the display after power-on

When the Alta first powers on, it will show the Fitbit logo for a few seconds, then display the current time. The screen will go dark after a few seconds of inactivity to save battery. This is normal behavior — the display is not broken. Tap the screen or press the button to wake it up and see the time or your current stats.

The Alta uses a small OLED screen that turns off automatically to extend battery life. You can wake the display by tapping it with your finger or pressing the button on the back. Each time you move your wrist or interact with the device, the screen will light up to show you information.

Charging the Alta for the first time

If you have a brand-new Alta that has never been turned on, charge it fully before powering it on for the first time. New devices ship with a partial charge, but a full charge ensures the battery is in good condition. Connect the device to the USB charging cable and plug it into a power source for one to two hours.

After the initial charge, you can power on the device and open the Fitbit app on your phone to pair it. The app will guide you through setup, including choosing your display preferences and connecting to your Wi-Fi network. Once pairing is complete, the Alta will sync with the app automatically whenever your phone is nearby.

How long the battery lasts between charges

The Fitbit Alta battery typically lasts five to seven days on a single charge, depending on how often you use the display and how active you are. Frequent screen taps and constant activity tracking will drain the battery faster than light use. Most users charge their Alta once a week.

When the battery gets low, the Alta will display a low-battery indicator on the screen. At that point, you have a day or two of use remaining before the device powers off completely. Charge it as soon as you see the warning to avoid losing activity data or missing notifications.

Restarting the Alta if it freezes

If the Alta becomes unresponsive or the screen freezes, you can restart it by holding the button on the back for 10 to 15 seconds. This is longer than the normal three-second power-on press. Hold it until the screen goes black and you see the Fitbit logo again. The device will restart and should respond normally.

A restart clears temporary glitches and does not erase any of your data or settings. Your activity history, goals, and app pairings will remain intact. If the device freezes repeatedly, try charging it fully and then restarting again.

Frequently Asked Questions

Why is my Alta screen not turning on even though I pressed the button?

The battery is empty. Charge the device for at least 20 minutes using the included USB cable, then try pressing the button again. If it still does not respond after an hour of charging, try a different cable or power source to rule out a faulty charger.

Does the Alta turn off automatically when I am not wearing it?

No. The Alta stays powered on all the time. The screen turns off automatically after a few seconds of inactivity to save battery, but the device itself continues tracking and syncing. You do not need to manually power it off.

What does the vibration mean when I turn on the Alta?

The vibration is a confirmation that the device has powered on successfully. It is the same vibration you will feel when you receive notifications or alarms. If you do not feel a vibration, the device may not have powered on, or the vibration motor may need service.

Can I turn off the Alta to save battery?

The Alta does not have a traditional off mode. The screen turns off automatically to save power, but the device continues running in the background. If you want to stop tracking temporarily, you can remove the device from your wrist, but powering it completely off is not an option.

How do I know if my Alta is charging?

When you connect the Alta to the USB cable, a charging indicator will appear on the screen — usually a lightning bolt or plug symbol. The device may also vibrate to confirm the connection. If you do not see an indicator after 30 seconds, disconnect and reconnect the cable to may support a proper connection.