Press and hold the button on the back to power on your Alta
The Fitbit Alta powers on by pressing and holding the small button on the back of the device for three seconds. You'll see the Fitbit logo appear on the screen, followed by a series of animations. Once the device finishes its startup sequence, you're ready to use it.
If your Alta has been sitting unused for a while, it may take a few extra seconds to respond. The device stores enough battery to power on even if it hasn't been charged recently, though you should charge it within a few days of first turning it on to may support it works properly.
The button itself is small and recessed slightly into the back of the band, so you may need to feel for it with your finger. Press firmly and hold steady—don't tap or release early. You'll feel a slight resistance as you press, which is normal.
Key Takeaways
- Press and hold the button on the back of the Alta for three seconds until the Fitbit logo appears on the screen.
- The startup sequence takes a few seconds; wait for the animations to finish before interacting with the device.
- If the screen remains blank after holding the button, the battery may be completely drained and the device needs charging.
- Once powered on, the Alta will display the time and begin tracking activity automatically.
- The Alta does not turn off manually; it enters sleep mode when not in use and wakes when you tap the screen or move your wrist.
What happens after the startup screen
After the Fitbit logo and startup animations finish, your Alta will display the current time. The device is now fully powered on and ready to track your steps, distance, calories burned, and active minutes. You don't need to do anything else—the Alta begins collecting data automatically.
If this is your first time turning on the device, you'll need to pair it with the Fitbit app on your phone or computer before it can sync your data. The pairing process walks you through setup step by step within the app itself. Without pairing, the Alta will still track your activity, but the data won't transfer to your account.
Once paired, the Alta syncs wirelessly whenever it's near your phone or computer. You'll see a brief sync animation on the screen when this happens. This happens automatically in the background, so you don't need to manually trigger it.
The battery was completely drained
If you press the back button and nothing appears on the screen, the battery is likely completely empty. Plug the Alta into its charging cable and leave it connected for at least 30 minutes. The screen may show a charging animation or remain blank during the initial charge.
Once the device has charged for a while, try pressing the back button again. It typically takes 1 to 2 hours for a completely dead Alta to charge enough to power on, though a full charge takes about 5 to 7 hours. The charging cable connects magnetically to the back of the device, so align the two metal contacts on the cable with the contacts on the Alta.
If the screen still doesn't respond after two hours of charging, try a different USB power source or a different charging cable if you have one. Sometimes the issue is with the power adapter or cable, not the device itself.
The screen is on but not responding
If the Alta powers on but the screen doesn't respond when you tap it or press the button, try a soft reset. Press and hold the back button for 10 to 15 seconds—longer than the normal startup press. The screen will go black, then the Fitbit logo will reappear. This clears temporary glitches without erasing your data.
If the device still doesn't respond after a soft reset, charge it fully and try again. If problems continue, the device may have a hardware issue and you may want to contact Fitbit support for troubleshooting.
Turning the Alta off again
The Fitbit Alta doesn't have a traditional off button. Instead, it enters a low-power sleep mode automatically when you're not wearing it or when the screen hasn't been tapped for several minutes. This preserves battery life while keeping the device ready to use.
If you want to stop the device from tracking temporarily, you can remove it and set it aside. The Alta will resume tracking as soon as you put it back on and interact with the screen. The device will not drain its battery significantly while in sleep mode, so you can leave it powered on indefinitely without worrying about the battery dying.
Frequently Asked Questions
How do I know if my Alta is actually on?
The screen will display the time and show the Fitbit logo during startup. Once fully powered on, tapping the screen should light it up and show your stats. If the screen remains completely black after pressing the back button for three seconds, the device is off or the battery is drained.
Can I turn on the Alta without charging it first?
Yes. The Alta ships with enough battery to power on and run for several days. However, you should charge it within a few days of first turning it on to may support it continues working properly.
What if the button on the back is stuck or hard to press?
The button should require firm but normal pressure. If it feels stuck, don't force it—this can damage the device. Try gently cleaning around the button with a dry cloth. If it remains stuck, contact Fitbit support for help.
Does the Alta turn on automatically when I put it on?
No. You must press the back button to power it on the first time. After that, the device stays in a low-power state and wakes up when you tap the screen or move your wrist, so you won't need to manually turn it on each day.
Why is my Alta screen showing the logo but not the time?
The device is still in its startup sequence. Wait another 5 to 10 seconds for the animations to finish. If the time still doesn't appear after that, try pressing the back button again to restart the sequence.