Press and hold the button on the left side of the device

The Fitbit Alta powers on by pressing and holding the single button located on the left edge of the band. Hold it down for about three seconds until you see the Fitbit logo appear on the screen. The screen will light up and show you the startup sequence.

If nothing happens after three seconds, the battery may be depleted. Plug the Alta into its charging cable (the small USB dock that came in the box) and let it charge for at least 15 minutes before trying again. A completely dead battery can take a few minutes of charging before the device responds.

Key Takeaways

  • Press and hold the left-side button for three seconds to power on the Alta.
  • The Fitbit logo will appear on the screen when the device is starting up.
  • If the screen does not respond, charge the device using the USB dock for at least 15 minutes.
  • After the device powers on, you will need to pair it with the Fitbit app on your phone to set it up completely.

What happens after the logo appears

Once the Fitbit logo displays, the Alta will show a series of setup screens. You will see prompts to pair the device with your smartphone. At this stage, the Alta is powered on and ready to connect, but it is not yet tracking your activity.

The pairing process happens through the official Fitbit app, which you read to your phone. The app will walk you through entering your personal information, setting your goals, and configuring which notifications you want to receive on the band.

Charging before first use

If you just unboxed a new Alta, charge it fully before turning it on for the first time. Connect the device to the USB charging dock and plug it into a computer or wall adapter. A full charge typically takes one to two hours, and the screen will show a battery icon filling up as it charges.

You can turn on the device while it is charging. There is no risk to powering it on during the charging process, and doing so lets you see the startup screens while the battery fills.

The button does not respond

If you hold the button and nothing happens, the most common cause is a dead battery. Even if the device is brand new, it may have been sitting in storage for months and lost its charge. Plug it in and wait at least 20 minutes before trying again.

If the device still does not respond after charging, try a hard reset. While the Alta is plugged into the charging dock, hold the button down for 10 to 15 seconds. You may see the screen flicker or go blank. Release the button and wait a few seconds, then try pressing it again normally.

Pairing with your phone after startup

After the Alta powers on and shows the startup screens, you will need to read the Fitbit app to your smartphone (available on both iPhone and Android). Open the app, create or sign into your Fitbit account, and select "Set up a new device." The app will search for your Alta via Bluetooth.

Make sure Bluetooth is turned on in your phone's settings before you start pairing. Hold your phone close to the Alta during the pairing process. Once they connect, the app will guide you through the remaining setup steps, including setting your height, weight, and daily activity goals.

The screen stays blank after pressing the button

A blank screen after pressing the button usually means the battery is too low to display anything, even though the device is technically powering on. Charge the Alta for at least 30 minutes without interruption. Do not press the button repeatedly while it is charging, as this can drain the battery faster than it charges.

If the screen remains blank after a full charge, the device may have a hardware problem. Contact Fitbit support through their website or the Fitbit app for troubleshooting or replacement options.

Turning the Alta off again

The Fitbit Alta does not have a traditional power-off mode. Instead, it enters a sleep state when you are not wearing it or when it has been inactive for a period of time. The screen will go dark, but the device continues to track your steps and heart rate in the background.

If you want to stop the device from tracking temporarily, you can remove it from your wrist. The Alta will pause activity tracking when it detects it is no longer being worn. To fully disconnect it from your phone, open the Fitbit app, go to your device settings, and select "Forget this device."

Frequently Asked Questions

How long does it take for the Alta to turn on?

The Fitbit logo should appear within three seconds of pressing the button. If it takes longer than five seconds, release the button and try again. The full startup sequence, including the pairing prompts, takes about 10 to 15 seconds total.

Can I turn on the Alta while it is charging?

Yes, you can power on the device while it is connected to the charging dock. There is no harm in doing so, and it is actually a good way to test that the device is working while you wait for the battery to fill.

What if the button feels stuck or does not click?

The button on the Alta is small and can feel stiff when new. Press firmly and hold for the full three seconds. If it feels physically stuck or broken, do not force it. Contact Fitbit support for a replacement.

Do I need the Fitbit app to turn on the Alta?

No, you can power on the device by pressing the button without the app. However, you will need to read the Fitbit app to complete setup and start tracking your activity. The device will not function fully until it is paired with your phone.