Press and hold the button on the left side to power on

Your Fitbit Charge 5 turns on by pressing and holding the button on the left edge of the device for about three seconds. You'll see the Fitbit logo appear on the screen, followed by a series of setup screens. The device will vibrate when it powers on, so you'll feel feedback even if the screen takes a moment to light up.

If the screen stays dark after holding the button, the battery may be depleted. Plug the Charge 5 into its charging cable (the magnetic pogo pins connect to the back of the device) and let it charge for at least 15 minutes before trying again. A completely dead battery can take 30 minutes to show any sign of life.

Key Takeaways

  • Press and hold the left-side button for three seconds until you see the Fitbit logo and feel a vibration.
  • If nothing happens, the battery is likely empty—charge the device for at least 15 minutes using the included magnetic cable.
  • After the logo appears, you'll see setup screens that guide you through pairing with the Fitbit app on your phone.
  • Once setup is complete, the Charge 5 will display the time and your stats automatically each time you wake it.

What happens during the first startup

When you power on a new Charge 5 for the first time, the device will walk you through a series of screens. You'll see language options, then prompts to set the time and date. Use the left button to scroll through options and the right button (or tap the screen) to select.

The device will then ask you to open the Fitbit app on your phone and begin pairing. This is a required step—the Charge 5 won't fully function without connecting to the app. The pairing process takes a few minutes and happens over Bluetooth, so keep your phone nearby during setup.

Charging before first use

Fitbit recommends charging your Charge 5 for at least two hours before using it for the first time, even though it may have some charge from the factory. This ensures the battery is in good condition and the device is ready for daily use.

The magnetic charging cable snaps onto the back of the device—you don't need to remove anything or open a port. The cable connects to any USB power source: a wall adapter, computer, or power bank. A full charge typically takes one to two hours, and the screen will show a battery icon while charging.

If the device won't turn on

If you've held the button for several seconds and nothing appears on the screen, the battery is almost certainly empty. Charge the device for at least 30 minutes, then try again. Some devices take longer to respond when the battery is completely drained.

If the device still won't power on after a full charge, try a force restart: hold the button for 10 to 15 seconds (longer than the normal three-second press). Release and wait a few seconds, then try the normal three-second press again. If this doesn't work, contact Fitbit support, as the device may have a hardware issue.

Waking the screen after startup

Once the Charge 5 is set up and running, the screen turns off automatically to save battery. You wake it by pressing the left button, tapping the screen, or raising your wrist (if wrist raise is turned on in the app). The device will show the time and your current stats.

If the screen seems unresponsive after startup, check the brightness setting in the Fitbit app. Very low brightness can make the display hard to see. You can also try restarting the device using the force restart method described above.

Turning the device off

You don't need to turn off your Charge 5 regularly—it's designed to run continuously and sync with your phone automatically. However, if you want to power it down completely, hold the left button for about 10 seconds until you see a power-off screen, then confirm the shutdown.

The device will enter a low-power state and stop tracking until you press the button again to turn it back on. Most users leave their Charge 5 on at all times, charging it every few days as needed.

Frequently Asked Questions

How long does the battery last after turning on?

The Fitbit Charge 5 battery lasts about five to seven days on a single charge with normal use. Battery life depends on how often you use the screen, whether you have always-on display turned on, and how frequently the device syncs with your phone. Heavier use of features like GPS will drain the battery faster.

Can I turn on the Charge 5 without the app?

The device will power on and show the time without the app, but you won't be able to complete setup or see your health data. The app is required to pair the device, set your personal information, and view your stats. Without pairing, the Charge 5 functions only as a basic watch.

What if the button feels stuck or doesn't respond?

The button can sometimes feel stiff on a brand-new device. Press it firmly and hold for the full three seconds—don't tap quickly. If it truly won't respond after multiple attempts, try charging the device first. If the button still doesn't work after charging, the device may have a defect and should be returned.

Does the Charge 5 turn on automatically when I put it on?

No. The Charge 5 must be powered on manually with the button. Once it's on, it stays on continuously and syncs with your phone in the background. You only need to press the button once during initial setup; after that, the device runs on its own until you choose to power it off.