Press and hold the button on the back to power on

The Fitbit Inspire 3 powers on by pressing and holding the single button located on the back of the device, near the bottom. Hold it down for about three seconds until you see the Fitbit logo appear on the screen. The device will vibrate slightly to confirm it is turning on.

If the screen remains dark after holding the button, the battery may be depleted. Charge the device using the included USB charging cable for at least 30 minutes before trying again. The charging port is on the back of the band, and you will see a small light indicator when power is flowing to the device.

Key Takeaways

  • Press and hold the back button for three seconds to turn on the Inspire 3; you will see the Fitbit logo and feel a vibration.
  • If the screen stays dark, charge the device for at least 30 minutes using the included USB cable before attempting to power on again.
  • The device will automatically turn off after a period of inactivity, so you may need to power it back on if it has been sitting unused.
  • Once powered on, you will be guided through setup steps on the device screen to connect it to the Fitbit app on your phone.

What happens after the device turns on

Once the Inspire 3 powers on, the screen will display the Fitbit logo briefly, then move to the setup screen. If this is your first time turning on the device, you will see prompts to begin pairing it with the Fitbit mobile app. The device will ask you to open the app on your phone and follow the pairing instructions there.

If you have already set up the device before, it will display the home screen showing the time and your current stats. From there, you can swipe through different screens to see your steps, heart rate, sleep data, and other tracked information. The device is now ready to wear and will begin collecting data when ready.

Charging before first use

New Inspire 3 devices typically arrive with a partial charge, but it is a good idea to fully charge the device before wearing it for the first time. Connect the charging cable to the port on the back of the band and plug the other end into a USB power source such as a computer, wall adapter, or power bank. The charging light will glow to show power is flowing.

A full charge usually takes one to two hours. You will know charging is complete when the light stops glowing or changes color (depending on your charger). The Inspire 3 battery typically lasts up to 10 days on a single charge, so you will not need to charge it daily like a smartphone.

The device will not turn on if the battery is completely dead

If you have held the back button for several seconds and nothing appears on the screen, the battery is likely completely drained. This can happen if the device has been stored for a long time without charging. Plug it in when ready and wait at least 30 to 45 minutes before trying to power it on again.

While charging, you may see a charging animation appear on the screen after a few minutes, which is a sign the battery is recovering. Do not be alarmed if the screen remains blank for the first 10 to 15 minutes of charging—this is normal. Once enough power has accumulated, the Fitbit logo will appear when you press the button.

Turning the device off when you are not using it

The Inspire 3 does not have a dedicated power-off button. Instead, the device enters a sleep mode automatically after about 10 to 15 minutes of inactivity. The screen will go dark, but the device is still on and tracking your activity in the background. To wake it, straightforward tap the screen or press the back button.

If you want to fully power down the device for storage or travel, you can do so through the Fitbit app settings on your phone. Open the app, go to your device settings, and look for a power-off or shutdown option. This will completely shut down the device until you press the back button again to turn it on.

Common reasons the device will not respond

If the Inspire 3 does not respond when you press the button, first check whether the battery is dead by charging it for at least 30 minutes. If the screen still does not light up after charging, try a force restart by holding the button down for 10 seconds instead of three. This can sometimes clear a software glitch that is preventing the device from responding.

Another common issue is a frozen screen. If the device is on but the screen is not responding to button presses or taps, hold the back button for 10 seconds to force a restart. After the restart, the Fitbit logo will appear and the device will go through its startup sequence again. If problems continue, you may need to unpair and re-pair the device through the Fitbit app.

Frequently Asked Questions

How long does it take for the Inspire 3 to turn on after I press the button?

The device should show the Fitbit logo within three seconds of pressing and holding the back button. If nothing appears after five seconds, release the button and try again. The entire startup process, from pressing the button to reaching the home screen, usually takes less than 10 seconds.

Can I turn on the Inspire 3 while it is charging?

Yes, you can press the button and turn on the device while it is plugged in and charging. The device will power on normally and you can use it while the cable is connected. However, it is more comfortable to wear when it is fully charged and not tethered to a cable.

What if the button on the back feels stuck or does not click?

The button should have a slight click or resistance when pressed. If it feels completely stuck or unresponsive, do not force it. Instead, try charging the device first, as a completely dead battery can sometimes make the button feel unresponsive. If the button still does not work after charging, the device may have a hardware issue.

Does the Inspire 3 turn on automatically when I put it on my wrist?

No, the device does not have a motion sensor that automatically powers it on when worn. You must manually press the back button to turn it on. Once it is on, it will stay on and track your activity until it enters sleep mode or you manually power it down through the app.

How do I know if the device is actually on if the screen is dark?

If the screen is dark but the device is on, try tapping the screen or pressing the back button to wake it. If the device responds with the Fitbit logo or home screen, it is on and in sleep mode. If nothing happens after several attempts and the device has been charged, it may be powered off completely.