Press and hold the left button to power on your Versa 2
To turn on your Fitbit Versa 2, locate the single button on the left side of the watch face. Press and hold that button for about three seconds until you see the Fitbit logo appear on the screen. The device will vibrate slightly to confirm it is powering on. This is the only button on the Versa 2, so there is no confusion about which one to use.
The first time you power on a new Versa 2, the device will guide you through a setup process. You will see the Fitbit logo, then a series of on-screen prompts asking you to pair the watch with the Fitbit app on your phone. If you are turning on a Versa 2 that has been set up before, it will straightforward boot up to the clock face and be ready to use.
Key Takeaways
- Press and hold the left button on your Versa 2 for three seconds to power it on.
- You will see the Fitbit logo appear and feel a vibration when the device is starting up.
- A brand new Versa 2 will ask you to pair it with the Fitbit app during first startup.
- If your Versa 2 will not turn on, charge it for at least 15 minutes before trying again.
What to do if the screen stays black
If you press and hold the button but nothing happens, your Versa 2 battery is likely empty. Connect the watch to its charging cable — the magnetic pogo pins on the back of the watch align with the pins on the charger. Plug the charger into a USB port or wall adapter and let the device charge for at least 15 minutes before trying to power it on again.
You may see a low battery icon (a lightning bolt) appear on the screen before the Fitbit logo shows up. This is normal and means the battery had just enough charge to respond to the button press. Continue charging until you see the full Fitbit logo and the device vibrates.
Charging your Versa 2 for the first time
When you first receive your Versa 2, the battery will have some charge but may not be full. Before you set it up, charge it completely using the included magnetic charging cable. Place the watch face-up on a flat surface and position the charger so the magnetic pins snap into place on the back of the watch. A charging icon will appear on the screen — usually a lightning bolt or a battery symbol.
A full charge takes about one to two hours. You will know the device is fully charged when the battery icon shows 100 percent or when the charging symbol disappears from the screen. Starting with a full battery ensures the setup process goes smoothly and gives you the longest time before you need to charge again.
Understanding the startup screen sequence
After you hold the button and see the Fitbit logo, the watch will display a series of screens. On a new device, you will see a welcome message, then prompts to open the Fitbit app on your phone and scan a code to pair the watch. On a previously set up device, you will go straight to the clock face or the last screen you were viewing.
If the watch is stuck on the Fitbit logo screen for more than 30 seconds, release the button and try again. Sometimes the device needs a moment to fully boot. If it still does not progress, try charging it again and powering on once more.
Restarting your Versa 2 if it freezes
If your Versa 2 is frozen or not responding to button presses, you can force it to restart. Press and hold the left button for 10 to 15 seconds — longer than the normal three-second power-on press. The screen will go black, then the Fitbit logo will reappear. This is a hard restart and will not erase your data or settings.
A hard restart clears temporary glitches that can cause the watch to freeze or respond slowly. After the restart completes, your watch will return to the clock face with all your data intact. If the watch freezes again frequently, you may need to update the software through the Fitbit app.
Turning off your Versa 2
To power off your Versa 2, press and hold the left button for about three seconds, just as you would to turn it on. A power menu will appear with options to turn off or restart. Tap "Power Off" to shut down the device. The screen will go black and the watch will no longer respond to button presses until you power it on again.
You do not need to power off your Versa 2 regularly. The device is designed to stay on and will enter a low-power sleep mode when you are not using it. Power it off only if you plan to store it for an extended period or if you are troubleshooting a problem.
Frequently Asked Questions
How long does it take for the Versa 2 to fully boot up?
The Fitbit logo should appear within three seconds of pressing the button, and the full startup takes about 10 to 15 seconds total. If it takes longer than 30 seconds, the device may be frozen and you should try a hard restart by holding the button for 10 to 15 seconds.
Can I turn on my Versa 2 while it is charging?
Yes, you can press the button and power on the watch while it is on the charger. The device will turn on normally and you can use it while charging. There is no risk of damage from powering on during a charge.
What if my Versa 2 will not pair with my phone after I turn it on?
Make sure Bluetooth is turned on in your phone's settings and that you have the Fitbit app installed. Open the app, tap the plus icon to add a new device, and follow the on-screen steps to scan the pairing code shown on your watch. If pairing still fails, try restarting both the watch and your phone.
Does the Versa 2 turn off automatically if I do not use it?
No, the Versa 2 stays powered on at all times. It enters a sleep mode when you are not actively using it to save battery, but it does not shut down. You must manually power it off by holding the button and selecting "Power Off" from the menu.