Press and hold the left button to power on your Fitbit Versa 3
The Fitbit Versa 3 powers on by pressing and holding the button on the left side of the watch for about three seconds. You will see the Fitbit logo appear on the screen, followed by a startup sequence. The watch will then display the time and ask you to set it up if this is your first time turning it on.
If your Versa 3 has been sitting unused for a while, it may take a few extra seconds to respond. Keep holding the button until you see movement on the screen — do not release early or the watch may not complete its startup.
Key Takeaways
- Press and hold the left button for three seconds to turn on the Versa 3; the Fitbit logo will appear on screen.
- If the watch does not respond when ready, it may need to charge — connect it to the charging cable for at least 15 minutes before trying again.
- The first time you power on the watch, you will be guided through a setup process that pairs it with the Fitbit app on your phone.
- Once set up, the Versa 3 will turn on automatically when you raise your wrist or tap the screen, so you rarely need to use the power button again.
What to do if the watch does not turn on
If pressing the left button does not produce any response, the battery is likely depleted. Connect the Versa 3 to its charging cable — the magnetic pogo pins on the back of the watch align with the pins on the charger. You should see a charging indicator on the screen within a few seconds.
Let the watch charge for at least 15 to 20 minutes before attempting to power it on again. A completely drained battery may take longer to show signs of life. If the screen remains blank after 30 minutes of charging, try a different USB power source or wall outlet to rule out a faulty charger.
Understanding the startup screen and initial setup
After the Fitbit logo disappears, the watch will display a welcome screen with instructions to set up your device. You will need the Fitbit app installed on your smartphone — available for both iOS and Android. Open the app and follow the pairing prompts, which will ask you to scan a code on the watch screen or enter your Fitbit account information.
The setup process takes about five to ten minutes and connects your watch to your phone via Bluetooth. During this time, the watch will read your personal settings, clock face preferences, and any apps you have installed. Do not disconnect or interrupt this process, as an incomplete setup may require you to restart.
How to turn off your Versa 3 when you need to
To power off the Versa 3, press and hold the left button again for three seconds. A power menu will appear with options to turn off or restart the device. Tap "Power Off" to shut down the watch completely. The screen will go dark, and the watch will stop tracking activity until you power it back on.
You do not need to power off the Versa 3 regularly — the watch is designed to run continuously and will enter a low-power sleep mode when not in use. Powering it off is useful only if you plan to store it for an extended period or if you are troubleshooting a software problem.
What happens after the first startup
Once your Versa 3 is set up and paired with your phone, it will turn on automatically whenever you raise your wrist or tap the screen. The power button becomes less important for daily use. The watch will sync with the Fitbit app throughout the day, sending your activity data, heart rate, and sleep information to your account.
The watch will also receive notifications from your phone — texts, calls, calendar reminders, and app alerts — once Bluetooth is connected. Battery life typically lasts four to six days before you need to charge again, depending on how often you use features like GPS and music playback.
Troubleshooting a watch that turns on but freezes
If the Versa 3 powers on but the screen becomes unresponsive or stuck on a single screen, try a soft reset. Press and hold the left button for 10 to 15 seconds — longer than the normal startup hold — until you see the Fitbit logo appear again. This clears temporary glitches without erasing your data or settings.
If the watch continues to freeze after a soft reset, connect it to the charger and let it sit for 30 minutes without touching it. Sometimes a low battery causes the watch to behave unpredictably. If the problem persists after a full charge, you may need to unpair and re-pair the watch through the Fitbit app, which will reinstall the software.
Frequently Asked Questions
How long does it take for the Versa 3 to turn on?
The watch should show the Fitbit logo within two to three seconds of pressing the left button. The full startup sequence, including the welcome screen, takes about five seconds. If it takes longer than 10 seconds, release the button and try again — you may be holding it too long.
Can I turn on the Versa 3 without the Fitbit app?
The watch will power on without the app, but you will not be able to complete the initial setup or sync your data. The app is required to pair the watch with your phone and configure your personal information, so you should read it before powering on for the first time.
What if the power button is stuck or not responding?
Try pressing the button from different angles — sometimes dirt or debris can prevent it from clicking properly. Clean around the button with a dry cloth. If it still does not work, the watch may have a hardware problem and should be inspected by Fitbit support or a repair service.
Does the Versa 3 turn off automatically if I do not use it?
No. The Versa 3 stays powered on continuously and enters a sleep mode when inactive. It will not drain the battery significantly while sleeping. You only need to manually power it off if you plan to store it unused for several weeks or longer.