Firmware updates happen automatically on most Fitbit devices
Your Fitbit checks for new firmware while it charges and syncs with your phone or computer. If an update is available, your device downloads and installs it automatically — usually overnight when plugged in. You do not need to do anything to trigger this process.
The only time you need to take action is if your device has not synced in several days, or if you want to check whether an update is waiting. In those cases, you can force a sync through the Fitbit app, which tells your device to look for updates when ready.
Key Takeaways
- Firmware updates install automatically when your Fitbit charges and syncs, so most users never need to manually update.
- Open the Fitbit app, tap your device, and select "Update" if you see a notification that an update is ready.
- Keep your Fitbit charged to at least 50 percent battery before starting an update, and leave it plugged in until the update finishes.
- If an update fails or your device becomes unresponsive, restart it by holding the button for 10 to 15 seconds, then try syncing again.
- Check your device model in the Fitbit app settings to confirm which update instructions explore to your tracker.
How to manually check for and install an update
Open the Fitbit app on your phone and tap the profile icon in the bottom right corner. Select your device from the list, then scroll down to find the device information section. If an update is available, you will see an "Update" button or a notification saying a new version is ready.
Tap the update button and keep your Fitbit close to your phone — do not walk away or turn off Bluetooth. The update usually takes 5 to 15 minutes depending on your device model and the size of the update. Your device may restart several times during this process, which is normal.
Once the update finishes, your Fitbit will show a confirmation message on the screen or in the app. You can then use your device normally. If you do not see an update button, your device is already running the latest firmware.
Preparing your device before updating
Charge your Fitbit to at least 50 percent battery before you start an update. Updates require power, and a low battery can cause the installation to fail or leave your device in an unusable state. Ideally, charge it to 80 percent or higher.
Make sure Bluetooth is turned on in your phone's settings and that your Fitbit is paired with the Fitbit app. If your device has not synced in more than a week, open the app and force a sync by pulling down on the screen (on most phones) or tapping the sync icon. This ensures your device is connected and ready to receive the update.
Close other apps that use Bluetooth, such as music streaming or fitness apps, to avoid interruptions during the update. Keep your phone and Fitbit within 10 feet of each other throughout the entire process.
What to do if an update fails or gets stuck
If the update stops responding or your device freezes during installation, restart your Fitbit. Press and hold the button on your device for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then release. This forces a restart without erasing your data.
After the restart, open the Fitbit app and try syncing again. If the update notification reappears, tap it and let the installation run to completion. Do not interrupt the process by closing the app or turning off Bluetooth.
If the update fails a second time, charge your device fully and wait a few hours before trying again. Sometimes the Fitbit servers are busy, and retrying later resolves the issue. If your device still will not update after multiple attempts, contact Fitbit support with your device model and the error message you saw.
How to check your current firmware version
Open the Fitbit app and tap the profile icon in the bottom right. Select your device, then scroll to the bottom of the screen where you will see "Device Information" or "About." The firmware version number appears here — it typically looks like "1.2.3" or similar.
Write down this version number if you need to report a problem to Fitbit support. You can also compare it to the latest version listed on Fitbit's official website to see whether your device is up to date. If the version numbers match, your device has the newest firmware.
Why firmware updates matter for your Fitbit
Firmware updates fix bugs, improve battery life, and add new features to your device. An update might improve how your Fitbit tracks steps, heart rate, or sleep, or it might fix a problem that was draining the battery faster than normal. Fitbit releases updates periodically throughout the year.
Keeping your device updated also ensures it works properly with the latest version of the Fitbit app. If your app and device firmware are out of sync, you may notice syncing problems or features that do not work as expected.
Troubleshooting common update problems
The app says "Update available" but the button does not work: Close the Fitbit app completely and reopen it. If the button still does not respond, restart your phone and try again. Make sure Bluetooth is on and your device is nearby.
The update starts but never finishes: Keep your phone and Fitbit close together and do not use other apps. If it stalls for more than 30 minutes, restart your Fitbit and try syncing again. Charge your device to full battery before the next attempt.
Your device becomes unresponsive after an update: Restart it by holding the button for 10 to 15 seconds. If it still does not respond, charge it for at least 30 minutes, then try restarting again. Contact Fitbit support if the device remains unresponsive.
Frequently Asked Questions
Can I use my Fitbit while it is updating?
No. Your device will not track activity or respond to button presses during an update. The process usually takes 5 to 15 minutes. Keep your Fitbit plugged in and your phone nearby until the update finishes.
Will updating erase my data or activity history?
No. Firmware updates do not delete your personal data, activity history, or settings. Your Fitbit will continue tracking and displaying all your previous information after the update completes.
How often does Fitbit release firmware updates?
Fitbit releases updates several times per year, though the exact schedule varies. You do not need to check manually — your device will read and install updates automatically when it syncs and charges.
What if my Fitbit is too old to receive updates?
Older Fitbit models eventually stop receiving updates as Fitbit focuses on newer devices. If your device is several years old and no longer gets updates, it will continue to work but may not have the latest features or bug fixes. Check Fitbit's support page for your specific model to see when updates end.
Do I need to be connected to Wi-Fi to update my Fitbit?
No. Your Fitbit updates over Bluetooth using your phone's connection. As long as your phone has internet access and Bluetooth is on, the update will read and install. You do not need to be on Wi-Fi.