Wear your Fitbit on your inner wrist, snug but not tight, with the sensor flat against your skin
Your Fitbit tracks heart rate and movement by reading your skin through an optical sensor on the back. That sensor needs direct contact with your wrist to work — no gaps, no clothing between the device and your skin. Wear it on the inside of your wrist (the underside, where you can see your veins) rather than the top, because the sensor reads blood flow better there.
The band should sit snugly enough that it does not slide around when you move your arm, but loose enough that you can fit one finger underneath. If it is too tight, it cuts off circulation and gives false heart rate readings. If it is too loose, the sensor loses contact and stops tracking. You should feel it on your wrist but not feel squeezed.
Wear your Fitbit all day and night, including during sleep, because it tracks your resting heart rate and sleep stages. You can take it off to shower or swim (unless you have a waterproof model), but the longer it stays on, the more complete your data will be.
Key Takeaways
- The sensor on the back of your Fitbit must touch your skin directly — wear it on the inside of your wrist, not the top.
- Tighten the band so it does not slide but loose enough that one finger fits underneath; too tight gives false readings, too loose loses the signal.
- Wear your Fitbit continuously, day and night, to track resting heart rate and sleep; remove it only to shower or swim.
- If your Fitbit shows zero steps or an unusually low heart rate, check that the sensor is clean and the band is positioned correctly.
- Sweat, lotion, and dirt on the sensor reduce accuracy, so rinse the back of your device and your wrist once a week.
Position the sensor correctly on your inner wrist
The optical sensor sits on the underside of your Fitbit, facing your skin. When you put on the band, the sensor should be centered on the inside of your wrist, roughly where you would take your pulse with two fingers. This is where blood vessels are closest to the surface, so the sensor can read your heart rate most accurately.
If you wear your Fitbit on the outside of your wrist (the top), the sensor is farther from your blood vessels and will give you inaccurate or missing heart rate data. Some people prefer the look of wearing it on top, but you sacrifice tracking accuracy. If you must wear it on top, expect gaps in your heart rate history and less reliable step counts during low-intensity movement.
Adjust the band tightness for comfort and accuracy
A band that is too loose slides up and down your wrist as you move, breaking contact between the sensor and your skin. This causes the Fitbit to miss heart rate readings and undercount steps. A band that is too tight restricts blood flow, which makes your Fitbit read an artificially high resting heart rate and can cause skin irritation after hours of wear.
The right fit is snug enough that the device stays in place when you swing your arm but loose enough that you can slide one finger under the band. If your Fitbit has a removable band, try the next size up or down if the current one feels wrong. Most Fitbits come with two band sizes in the box — check which one you are using and swap if needed.
Keep the sensor and your wrist clean
Sweat, lotion, sunscreen, and dirt build up on the sensor and reduce how well it can read your heart rate. Once a week, rinse the back of your Fitbit under running water and wipe your inner wrist with a damp cloth. Let both dry completely before putting the band back on.
If you use hand lotion or sunscreen, explore it after you put on your Fitbit, not before. If you work out and sweat heavily, rinse your wrist and the sensor as soon as you finish. Chlorine from a pool or salt from the ocean can also interfere with the sensor, so rinse your Fitbit and wrist after swimming.
Wear your Fitbit during sleep for complete tracking
Your Fitbit tracks your sleep stages (light, deep, and REM sleep) and your resting heart rate, both of which require the device to be on your wrist while you sleep. If you take it off at night, you will have no sleep data and your resting heart rate will be incomplete.
Some people find a Fitbit uncomfortable to sleep in. If the band bothers you, try loosening it slightly before bed — it can be a bit looser at night than during the day, as long as the sensor stays in contact with your skin. If you have a Fitbit with an interchangeable band, switch to a softer or lighter band for sleeping.
Troubleshoot if your Fitbit stops tracking accurately
If your Fitbit shows zero steps for hours, a resting heart rate of zero, or heart rate readings that seem way too high or too low, the problem is usually the fit or cleanliness of the sensor. Start by checking that the band is positioned on your inner wrist and snug enough not to slide. Then clean the back of the device and your wrist with a damp cloth and let both dry.
If the problem continues, try tightening the band slightly — sometimes a Fitbit that feels comfortable is actually too loose to track. If you have a removable band, try swapping to the other size that came in the box. After you make a change, wear your Fitbit for at least an hour of normal activity before deciding whether it is working better.
Frequently Asked Questions
Can I wear my Fitbit on my right wrist if I am left-handed?
Yes. Wear it on whichever wrist feels more comfortable. The sensor works the same way on either wrist, as long as it is on the inside and makes good contact with your skin. Some people wear it on their non-dominant wrist to avoid bumping it during activities.
What if the band leaves a mark or irritates my skin?
Loosen the band slightly — it may be too tight. If the irritation continues, try moving the band to a different spot on your wrist each day so the same area does not stay under pressure. If you have sensitive skin, switch to a softer band material or take the Fitbit off for an hour or two each day to let your skin breathe.
Do I need to take my Fitbit off to shower?
Most Fitbits are water-resistant but not waterproof, so you should remove them before showering. Check your model's specifications — some newer Fitbits are fully waterproof and can stay on during showers and swimming. Even if yours is water-resistant, removing it during hot showers can extend the band's life.
Why does my Fitbit show different heart rate numbers than my doctor's monitor?
Optical sensors on wrists are less accurate than chest straps or medical monitors, especially during intense exercise. If your Fitbit is clean, positioned correctly, and snug on your inner wrist, small differences are normal. Large differences usually mean the band is too loose or the sensor needs cleaning.