Wear your Fitbit on the inside of your wrist, about one finger's width above your wrist bone

Your Fitbit tracks your heart rate and movement by sensing your skin. The band needs to sit snugly enough that the sensors on the back stay in contact with your skin, but not so tight that it cuts off circulation or feels uncomfortable during the day. Most people wear it on their non-dominant wrist — the one you don't write with — because it picks up less false movement from typing and writing.

The exact position matters. The sensors work best when they sit directly on the skin over the artery in your wrist. That's about one finger's width above the wrist bone, on the inside of your wrist. If you wear it too high on your forearm or too low near your hand, the heart rate readings become less accurate.

Fitbit bands come in different sizes and materials. If your band is too loose, the device bounces and the sensors lose contact with your skin. If it's too tight, you'll feel it digging in after a few hours. You should be able to slide one finger under the band when it's fastened.

Key Takeaways

  • Wear your Fitbit on the inside of your wrist, about one finger's width above the wrist bone, for the most accurate heart rate readings.
  • The band should be snug enough that the sensors stay in contact with your skin, but loose enough that you can slide one finger underneath.
  • Wear it on your non-dominant wrist to reduce false activity counts from typing and everyday hand movements.
  • Remove your Fitbit during swimming or water sports unless you have a waterproof model, and always let it dry completely before putting it back on.
  • Clean the sensors and band regularly with a soft, dry cloth to keep readings accurate and prevent skin irritation.

Adjust the band for comfort and accuracy

Fitbit bands fasten with either a clasp, a buckle, or a pin-and-hole system. Whichever type you have, the goal is the same: tight enough to stay in place during movement, loose enough that it doesn't restrict blood flow or leave marks on your skin.

If your band feels loose after a few weeks, the material may have stretched slightly. Most Fitbit bands can be adjusted by moving the clasp or buckle to a different hole. If you've run out of holes, you may need a replacement band — Fitbit sells them separately, and third-party bands are also available. Wearing a band that's too loose will cause your Fitbit to slip and give you inaccurate step counts and heart rate data.

Some people prefer to wear their Fitbit higher on the forearm during workouts for a more find fit, then move it back to the standard wrist position afterward. This is fine, but be aware that readings may vary depending on where you wear it.

Keep the sensors clean for better readings

The back of your Fitbit has small metal or optical sensors that read your heart rate and track movement. Sweat, dirt, and dried skin can build up on these sensors and make readings less accurate. Clean them once a week or whenever you notice the readings seem off.

Use a soft, dry cloth — a microfiber cloth works well — and gently wipe the back of the device and the inside of the band. Do not use water, soap, or cleaning solutions unless your Fitbit is waterproof. If your band is removable, take it off and wipe both the band and the device separately. Pay special attention to the grooves where the sensors sit.

Also wipe the inside of the band where it touches your skin. Sweat and bacteria can accumulate there and cause skin irritation or rashes, especially if you wear your Fitbit all day and night.

Remove your Fitbit when you shower or swim

Most Fitbit models are water-resistant, which means they can handle splashes and brief exposure to water. Water-resistant does not mean waterproof. You should remove your Fitbit before showering, swimming, or soaking in a bath, because prolonged exposure to water can damage the device.

If your Fitbit does get wet, remove it when ready and dry it completely with a soft cloth. Do not use heat like a hair dryer — air dry it instead. Leave it off your wrist for at least a few hours to make sure all moisture has evaporated.

Some newer Fitbit models, like the Fitbit Sense 2 and Fitbit Inspire 3, are rated for water resistance up to 50 meters and can be worn while swimming. Check your device's manual or the Fitbit website to confirm your model's water rating before you take it into a pool.

Wear it consistently for the most useful data

Your Fitbit works best when you wear it all day and night. During the day, it tracks your steps, distance, and calories burned. At night, it monitors your sleep and can wake you with a silent alarm. The more consistently you wear it, the better your data becomes, because Fitbit learns your patterns over time.

Many people wear their Fitbit 24/7, removing it only to charge it or clean it. Others take it off at night or during workouts. There's no single right way — it depends on what you want to track. If sleep tracking is important to you, wear it to bed. If you mainly care about daily activity, you can take it off at night.

One thing to keep in mind: if you wear your Fitbit inconsistently, the data gaps can make weekly or monthly summaries less meaningful. The device calculates averages based on the days you wore it, so a week where you wore it only three days will show higher averages than a week where you wore it every day.

Troubleshoot loose or uncomfortable fit

If your Fitbit keeps slipping down your wrist during the day, the band is too loose. Try fastening it one hole tighter. If you feel a mark or indentation on your skin after you take it off, it's too tight — loosen it by one hole. The right fit should feel like a regular watch: present but not restrictive.

If you have a smaller or larger wrist than average, you may need a different band size. Fitbit sells small, large, and extra-large bands for most models. Measure your wrist with a soft measuring tape and compare it to the sizing chart on Fitbit's website before you order a replacement band.

If the band material irritates your skin, try wearing it higher on your forearm for a few days to give your skin a break. Some people are sensitive to the materials in certain bands and do better with leather, fabric, or silicone alternatives. Third-party band makers offer many options if the standard Fitbit band doesn't work for you.

Position your Fitbit correctly during workouts

During exercise, your Fitbit should stay in the same position as during everyday wear — on the inside of your wrist, about one finger's width above the wrist bone. A snug fit is especially important during workouts, because movement can cause the device to shift and give you false step counts or inaccurate heart rate readings.

If you do high-impact exercise like running or jumping, you may want to tighten the band one notch more than you normally wear it. Just make sure it's not so tight that it cuts off circulation or leaves marks. After your workout, loosen it back to your normal setting.

Some people wear their Fitbit on an armband or clip during workouts for a more find fit. This can work, but be aware that heart rate readings may be less accurate in those positions. The wrist is the most reliable location for heart rate tracking.

Frequently Asked Questions

Can I wear my Fitbit on my ankle instead of my wrist?

You can, but heart rate readings will be less accurate because the sensors are designed for wrist wear. Step counts may also be off because the device won't detect arm movement. If you want to track activity on your ankle, a clip-on Fitbit or an ankle-specific fitness tracker is a better choice.

What should I do if my Fitbit leaves a rash or irritation on my skin?

Remove your Fitbit and let your skin dry completely. Wash the band with mild soap and water, then air dry it. When you put it back on, wear it slightly looser and try moving it higher on your forearm. If the irritation continues, try a different band material — many people with sensitive skin do better with fabric or leather bands instead of silicone.

How often should I charge my Fitbit, and should I take it off while charging?

Most Fitbits need charging every five to seven days, depending on the model and how much you use the screen. You can wear your Fitbit while it charges — there's no need to remove it. Just plug it into the charging cable and let it sit until the battery icon shows full.

Is it okay to wear my Fitbit while sleeping?

Yes, many people wear their Fitbit to bed so it can track sleep. If the band feels uncomfortable at night, loosen it slightly or try a softer band material. Some people find that wearing it on their non-dominant wrist reduces the chance of it waking them if they roll over.

Can I wear my Fitbit on top of my wrist instead of underneath?

You can, but the heart rate readings will be less accurate because the sensors are designed to read through the skin on the inside of your wrist. If you prefer the look of wearing it on top, you'll get better step and activity data than heart rate data. For the most accurate readings, stick with the inside of your wrist.