The Fitbit Charge 2 is water-resistant, not waterproof — a distinction that matters

The Fitbit Charge 2 has a water-resistance rating of 5 ATM (atmospheres), which means it can handle submersion up to 50 meters (about 164 feet) for up to 10 minutes. In practical terms, this rating covers swimming, showering, and brief water exposure — but it does not cover diving, water sports with high-pressure jets, or prolonged underwater use.

The difference between water-resistant and waterproof matters. Water-resistant means the device can tolerate water exposure under normal conditions. Waterproof means it is sealed against water in all circumstances. Fitbit uses the water-resistant label because no consumer device is truly waterproof forever — seals degrade, and damage can happen. The 5 ATM rating is Fitbit's promise about what the device can handle under normal use.

Key Takeaways

  • The Fitbit Charge 2 is rated 5 ATM, meaning it can be submerged in up to 50 meters of water for 10 minutes without damage under normal conditions.
  • You can wear it while swimming, showering, and doing water aerobics, but not while diving or in high-pressure water jets.
  • The device will track your swimming automatically if you set it to swim mode before entering the water.
  • Cracks, loose seals, or damage to the band or screen reduce water resistance and can allow water inside.
  • Rinsing the device with fresh water after saltwater or chlorinated water exposure helps prevent corrosion and extends its lifespan.

What the 5 ATM rating actually covers

A 5 ATM rating is designed for recreational water use. You can safely wear your Charge 2 while swimming laps, treading water, or doing water aerobics. Showering is fine. Splashing and rain are fine. Brief accidental submersion — dropping it in a pool or sink — is fine.

The rating does not cover activities where water pressure is high or sustained. Snorkeling and scuba diving exceed the depth limit. Water skiing, jet skiing, and surfing create pressure spikes that can overwhelm the seals. Hot tubs and saunas are also risky because heat can degrade the seals faster than normal use would. Saltwater and chlorinated water are harder on the seals than fresh water, so rinse the device afterward if you swim in a pool or ocean.

How to use swim mode and track your workouts

The Fitbit Charge 2 can track swimming as a workout. Before you get in the water, open the Fitbit app on your phone, go to the device settings, and enable swim mode. You can also set a default swim mode in the app so it is always ready. When you put on the device, you can manually start a swim workout by holding the button on the side until the swim icon appears on the screen.

Once you finish swimming, the device will log the workout with duration, calories burned, and laps (if you set the pool length). The data syncs to the app when the device reconnects to your phone. Swim mode also locks the screen so water droplets do not accidentally trigger buttons while you are in the water.

Signs your Charge 2 may have lost water resistance

Water resistance degrades over time and with damage. If you notice cracks in the screen, a loose or cracked band, or separation between the band and the main device body, the seals are compromised. Water can seep in even if the device still powers on. A visibly corroded charging port or discoloration around the edges of the screen are also red flags.

If your device has been dropped hard or sat on, the internal seals may be damaged even if the outside looks fine. If you notice condensation inside the screen that does not clear after a few hours, water has already entered the device. At that point, stop using it in water and contact Fitbit support — continued water exposure will damage the battery and electronics.

Caring for your device after water exposure

After swimming in a pool or ocean, rinse the Charge 2 under fresh running water to remove chlorine, salt, and other chemicals that corrode the seals and metal contacts. Pat it dry with a soft cloth. Do not use hot water or a hair dryer, as heat can damage the battery and seals.

If the device gets wet inside the band (which is common), remove the band and let both the band and the main device air-dry for at least an hour before wearing it again. You can also gently wipe the inside of the band with a dry cloth. Avoid storing the device in a sealed bag or case while it is damp, because moisture trapped inside will corrode the electronics.

What to do if water gets inside the device

If you see condensation under the screen or the device stops responding after water exposure, do not try to charge it or use it. Moisture inside can cause a short circuit. Instead, power it off if possible and let it air-dry in a warm, dry place (not in direct sunlight) for 24 to 48 hours. Do not use a heat source like an oven or microwave.

If the device does not dry out or still does not work after drying, contact Fitbit support. Fitbit offers a limited warranty that may cover water damage depending on the cause and your purchase date. Keep your receipt and proof of purchase handy when you reach out.

Frequently Asked Questions

Can I wear my Charge 2 in a hot tub or sauna?

No. Heat degrades the seals that make the device water-resistant. Hot tubs and saunas exceed safe temperatures. Remove the device before entering either one.

Will my Charge 2 track swimming if I do not set swim mode first?

It may log some movement as a workout, but it will not accurately track swimming metrics like laps or pool length. Set swim mode before you enter the water for accurate data.

Is it safe to wear my Charge 2 while showering?

Yes. Showering is well within the 5 ATM rating. The warm water and soap are not a problem. Just rinse it with fresh water and dry it afterward if you want to be extra cautious.

What should I do if my Charge 2 gets wet inside the screen?

Stop using it in water when ready. Power it off and let it air-dry in a warm, dry place for 24 to 48 hours without heat. If it does not dry or still does not work, contact Fitbit support about warranty coverage.

Can I dive with my Charge 2?

No. The 5 ATM rating covers depths up to 50 meters, but diving creates pressure spikes and sustained pressure that exceed what the seals are designed for. Snorkeling and scuba diving are not safe uses.