Most Fitbits are water-resistant, but not waterproof — and the difference matters

Most current Fitbit models can handle splashes, sweat, and brief submersion in water, but they are not waterproof and will fail if submerged deeply or for long periods. Fitbit rates water resistance in meters, which tells you the depth and type of water exposure each model can survive. A Fitbit rated to 50 meters can handle swimming; one rated to 5 meters can handle a shower but not a pool. The rating does not mean you can wear it indefinitely underwater — it means the device can withstand that depth of water pressure for a short time.

Water resistance degrades over time. Seals wear out, and small cracks develop from normal use. A Fitbit that handled water perfectly for two years may start leaking after three. If your device gets wet and stops working, water damage is usually not covered by Fitbit's standard warranty.

Key Takeaways

  • Water-resistant ratings (measured in meters) tell you the depth of water a Fitbit can briefly survive, not how long it can stay wet.
  • Fitbits rated to 50 meters are safe for swimming and snorkeling; those rated to 5 meters handle showers and splashes but not pools.
  • Water resistance weakens over time as seals and materials age, so a device safe in water today may fail in a year or two.
  • Saltwater, chlorine, and hot water damage Fitbits faster than fresh water, and you should rinse the device after exposure to any of these.

Water-Resistance Ratings and What They Mean

Fitbit uses a meter-based scale to describe water resistance. The number refers to the water pressure the device can withstand during a brief test — not the depth you can safely dive to, and not how long you can leave it submerged. A 5-meter rating means the device survived a test simulating 5 meters of water pressure for a short time. A 50-meter rating means it survived 50 meters of pressure.

In practical terms, 5 meters covers everyday water: showers, hand washing, light rain, and accidental splashes. Fitbits with a 5-meter rating should not go in a pool or bathtub. A 50-meter rating is designed for swimming and snorkeling — the device can handle repeated submersion and brief time underwater. Some older Fitbit models have no water-resistance rating at all and should be kept away from water entirely.

Check your specific model's rating on Fitbit's official website or in your device manual. The rating is often printed on the back of the device or in the box. Do not assume all Fitbits have the same rating — they vary by model and generation.

Which Fitbit Models Are Water-Resistant

Current Fitbit models include the Charge 6, Inspire 3, Sense 2, Versa 4, and Ace LTE. Most of these are rated to 50 meters, meaning they are safe for swimming. The Inspire 3 and Charge 6 are both rated to 50 meters. The Sense 2 and Versa 4 are also rated to 50 meters. The Ace LTE, designed for children, is rated to 50 meters as well.

Older models vary. Some earlier Charge and Inspire versions were rated to only 5 meters. The original Versa and some Ionic models had 50-meter ratings. If you own an older Fitbit, look up your specific model number on Fitbit's support pages to find its rating — do not guess based on the name alone.

How to Protect Your Fitbit in Water

Even if your Fitbit is rated for water, take steps to extend its life. Rinse the device with fresh water after swimming in a pool or ocean — chlorine and salt corrode the seals and metal contacts faster than fresh water does. Dry it thoroughly with a soft cloth afterward. Do not use hot water, a hair dryer, or compressed air to dry it; these can force water into the seals or damage the screen.

Avoid submerging your Fitbit in hot water, such as a hot tub or sauna. Heat weakens the adhesive that holds the seals in place. Do not wear your Fitbit while showering if the water is very hot or if you use high-pressure shower heads — the force and heat can damage the seals over time. Remove your Fitbit before activities like water skiing, diving, or white-water rafting, where the force of water or repeated impacts could exceed the device's limits.

Check the seals periodically. If you notice cracks, gaps, or peeling around the edges of the band or screen, the water resistance is compromised. Stop exposing the device to water and contact Fitbit support about repair or replacement options.

What Happens If Water Gets Inside

If your Fitbit gets wet and stops responding, water has likely entered the device. Do not try to charge it or turn it on — this can cause a short circuit and permanent damage. Instead, remove the band if possible and let the device dry completely in a warm, dry place for at least 24 hours. Do not use heat sources like ovens or hair dryers. After it dries, try charging it again.

If the device still does not work after drying, water damage has occurred. Fitbit's standard warranty does not cover water damage, even if the device was rated for water resistance. Some credit cards or homeowners' insurance policies cover accidental damage, so check your coverage before paying for a replacement. Fitbit also offers accidental damage protection plans for some models, which you can purchase at the time of purchase or sometimes afterward.

Saltwater, Chlorine, and Other Liquids

Saltwater and chlorine are harder on Fitbits than fresh water. Both corrode the metal contacts and degrade the seals faster. If you swim in a pool or ocean, rinse your Fitbit with fresh water within an hour of getting out. This removes the salt or chlorine before it has time to cause damage.

Do not expose your Fitbit to other liquids like soap, shampoo, sunscreen, or insect repellent. These can damage the seals and screen coating. If your Fitbit comes into contact with any of these, rinse it when ready with fresh water and dry it thoroughly.

When to Remove Your Fitbit

Even if your Fitbit is rated to 50 meters, remove it before activities where water pressure or force exceeds normal conditions. This includes diving deeper than snorkeling depth, water skiing, jet skiing, white-water rafting, and high-impact water sports. The 50-meter rating assumes calm water and brief submersion — not the sustained pressure or repeated impacts of extreme water sports.

Also remove your Fitbit before washing your hands with very hot water or using a high-pressure hose. The force of pressurized water can exceed what the seals are designed to handle. If you are unsure whether an activity is safe, err on the side of caution and take the device off.

Frequently Asked Questions

Can I wear my Fitbit in the shower?

Yes, if it is rated to 5 meters or higher. However, avoid very hot water and high-pressure shower heads, as heat and force can damage the seals over time. Rinse it with fresh water and dry it after your shower.

Is a 50-meter Fitbit safe for diving?

A 50-meter rating is designed for snorkeling and swimming, not scuba diving. Do not wear your Fitbit while scuba diving, as the sustained pressure at depth exceeds what the device is tested for.

What should I do if my Fitbit gets wet and stops working?

Remove the band if possible and let the device dry in a warm, dry place for at least 24 hours without using heat sources. After it dries completely, try charging it again. If it still does not work, water damage has occurred and is usually not covered by warranty.

Does water resistance mean my Fitbit is waterproof?

No. Water-resistant means it can survive brief exposure to water at a certain depth. Waterproof would mean it is completely sealed and safe indefinitely underwater. Fitbits are water-resistant, not waterproof, and will eventually fail if exposed to water for long periods or if the seals degrade.

How often should I replace my Fitbit because of water damage?

This depends on how often you expose it to water and how well you maintain the seals. Many users wear water-resistant Fitbits for swimming regularly for two to three years before seals begin to fail. Rinsing with fresh water and drying thoroughly after each water exposure extends the lifespan.