Most Fitbits are water-resistant, not waterproof — and the difference matters

Your Fitbit is likely water-resistant, which means it can handle splashes, sweat, and brief submersion, but it is not waterproof in the way a submarine is. Water-resistant means water will not damage the device under normal conditions, but it has limits. The depth and duration matter. A Fitbit rated for 5 ATM (atmospheres of pressure) can survive being submerged in up to 50 meters of water for 10 minutes — but that does not mean you should take it diving.

The exact water resistance rating depends on which Fitbit model you own. Fitbit Inspire, Charge, Sense, and Versa models typically carry a 5 ATM rating. Some older or budget models have lower ratings — the original Fitbit Flex, for example, was only 1 ATM, meaning it could handle splashes but not swimming. The Fitbit One had no water resistance at all. Check your device manual or the Fitbit website for your specific model's rating.

Key Takeaways

  • Most current Fitbits are rated 5 ATM, which means they can be worn while swimming but should not be used for diving or water sports with high pressure.
  • Water-resistant does not mean waterproof — your Fitbit can fail if exposed to hot water, saltwater, or prolonged submersion beyond its rating.
  • Chlorine, saltwater, and soap can degrade the seals over time, so rinse your Fitbit with fresh water after swimming or showering.
  • Older Fitbit models have lower water resistance ratings, so check your device manual before taking it into water.
  • If water gets inside your Fitbit, do not charge it — let it dry completely for 24 to 48 hours before attempting to use it again.

What the water resistance ratings actually mean

Fitbit uses the ATM system, which measures pressure resistance rather than depth alone. One ATM equals the pressure of the atmosphere at sea level. A 1 ATM rating means the device can handle splashes and brief accidental submersion — think washing your hands with the device on. A 3 ATM rating (some older Fitbits) handles light swimming and snorkeling. A 5 ATM rating, which covers most modern Fitbits, is suitable for swimming and snorkeling but not diving.

The ATM number does not directly translate to depth in everyday use. A 5 ATM Fitbit can theoretically handle 50 meters of depth, but that assumes perfect conditions and no movement. In reality, swimming creates dynamic pressure — your arm moving through water creates additional force. This is why Fitbit recommends against using 5 ATM devices for diving, water skiing, or other high-impact water sports, even though the static pressure rating would suggest it could handle it.

If you own a Fitbit with no water resistance rating or a 1 ATM rating, keep it away from water beyond splashes. These devices are not designed for swimming or showering.

Swimming and showering with your Fitbit

You can wear a 5 ATM Fitbit while swimming laps in a pool or the ocean. The device will track your heart rate and movement, though it will not record the specific stroke type or distance the way a dedicated swim watch might. Fitbit does track swim sessions if you manually start a swim workout in the app before entering the water.

Showering with your Fitbit is generally safe with a 5 ATM device, but hot water is riskier than cold. The seals that keep water out can weaken when exposed to heat repeatedly. If you shower with your Fitbit regularly, rinse it with cool fresh water afterward and dry it completely. Avoid getting soap directly on the device — soap residue can accumulate in the seams and eventually cause problems.

Do not wear your Fitbit in a hot tub, sauna, or steam room. The combination of heat and moisture can damage the internal components and degrade the seals much faster than cold water exposure. Fitbit explicitly warns against this in their documentation.

Saltwater, chlorine, and other liquids to avoid

Saltwater is harder on your Fitbit than fresh water. Salt corrodes the metal contacts and can damage the seals over time. If you swim in the ocean, rinse your Fitbit thoroughly with fresh water as soon as you get out. Do the same after swimming in a chlorinated pool — chlorine is a corrosive chemical that can eat away at the device's exterior and seals.

Never submerge your Fitbit in soap, shampoo, conditioner, or other cleaning products. These substances can seep into the seams and cause internal damage. If your Fitbit gets covered in sunscreen or bug spray, wipe it gently with a damp cloth and then dry it. Do not rinse it under running water if you can avoid it.

Avoid exposing your Fitbit to chlorinated water for extended periods. If you swim regularly in a chlorinated pool, plan to rinse and dry your device after each session. Over months or years of daily pool swimming, chlorine exposure can shorten the lifespan of the seals.

What to do if water gets inside your Fitbit

If you see condensation under the screen or notice that your Fitbit is not responding normally after water exposure, water has likely entered the device. Do not charge it when ready. Charging a wet device can cause a short circuit and permanently damage the battery and electronics.

Remove your Fitbit and place it in a warm, dry location — not in direct sunlight or near a heat source like a radiator. A windowsill or shelf in a dry room works well. Leave it there for 24 to 48 hours. Do not try to speed up the drying process with a hair dryer or oven, as heat can damage the battery and internal components.

After the device has dried completely, try turning it on and charging it normally. If it still does not work, contact Fitbit support. Depending on your warranty and the cause of the damage, they may be able to repair or replace the device. Note that water damage is sometimes covered under Fitbit's warranty, but not always — check your specific coverage.

Caring for your Fitbit after water exposure

After swimming or showering, dry your Fitbit with a soft, lint-free cloth. Pay special attention to the seams, the charging contacts, and any crevices where water might collect. If your device has a removable band, take it off and dry both the band and the tracker separately.

Let your Fitbit air-dry for at least 30 minutes before putting the band back on or wearing it again. This gives any trapped moisture time to evaporate. If you notice any visible water droplets on the screen or inside the device, wait longer before wearing it.

If you swim or shower with your Fitbit regularly, inspect the seals and band attachment points every few months. Look for cracks, discoloration, or gaps where the band meets the tracker. If you see damage, stop using the device in water and contact Fitbit support about repair or replacement options.

Water resistance ratings for different Fitbit models

Fitbit ModelWater Resistance RatingSafe For
Inspire, Inspire 2, Inspire 35 ATMSwimming, snorkeling, splashes
Charge 5, Charge 65 ATMSwimming, snorkeling, splashes
Sense, Sense 25 ATMSwimming, snorkeling, splashes
Versa 3, Versa 45 ATMSwimming, snorkeling, splashes
Flex 25 ATMSwimming, snorkeling, splashes
Original Flex1 ATMSplashes only, not swimming
OneNoneKeep away from water

If your Fitbit model is not listed here, check the device manual or visit the Fitbit support website and search for your specific model number. The water resistance rating is usually printed on the back of the device or in the documentation that came with it.

Frequently Asked Questions

Can I wear my Fitbit in a swimming pool?

Yes, if your Fitbit has a 5 ATM rating. Most current Fitbit models are rated 5 ATM and can be worn while swimming in pools or the ocean. Rinse it with fresh water afterward to remove chlorine or salt. Older models with 1 ATM or no rating should not be submerged.

What happens if I accidentally drop my Fitbit in water?

If it is a 5 ATM device, it should be fine. Remove it from the water, dry it with a soft cloth, and let it air-dry for 30 minutes before wearing it again. If it is a lower-rated device or if water gets inside, do not charge it — let it dry for 24 to 48 hours first.

Can I wear my Fitbit in a hot tub or sauna?

No. Hot water and steam can damage the seals and internal components, even on a 5 ATM device. Fitbit explicitly warns against using their devices in hot tubs, saunas, or steam rooms. Remove your Fitbit before entering these environments.

Does my Fitbit need to be waterproof for everyday use?

Water-resistant is enough for everyday use. You can wear your Fitbit while washing your hands, in light rain, or while sweating during exercise. You only need a higher rating if you plan to swim or shower regularly with it on.

How do I know my Fitbit's water resistance rating?

Check the back of your device — the rating is often printed there. You can also look up your model number on the Fitbit website or in the manual that came with your device. If you cannot find it, contact Fitbit support with your model number and they will tell you.