The Fitbit Versa 4 is water-resistant, not waterproof — it can handle splashes and brief submersion but not swimming or diving
The Fitbit Versa 4 has a water resistance rating of 50 meters, which means it can withstand water pressure equivalent to that depth. In practical terms, this protects the device from sweat, rain, and accidental splashes. You can wear it while washing your hands or during a light drizzle without damage. However, the 50-meter rating does not mean you can dive to 50 meters — it is a laboratory test, not a depth limit for real-world use.
The distinction between water-resistant and waterproof matters. Waterproof means the device is sealed against water entirely. Water-resistant means water can enter the device, but the internal components are protected well enough that it still functions. The Versa 4 falls into the water-resistant category. Over time, seals can degrade, so a device rated for 50 meters today may not perform the same way in two years.
Key Takeaways
- The Fitbit Versa 4 has a 50-meter water resistance rating, which covers everyday water exposure like rain and hand-washing but not swimming.
- You should remove the Versa 4 before showering, as hot water and soap can degrade the seals that protect the internal components.
- Do not wear the device while swimming, snorkeling, or diving — salt water and chlorine can damage the seals and corrode internal parts.
- If water gets inside the device, turn it off when ready, dry it completely, and contact Fitbit support before using it again.
What the 50-Meter Rating Actually Covers
A 50-meter water resistance rating is designed for incidental water contact — the kind that happens in daily life without you planning for it. This includes rain, splashing while washing dishes, and accidental submersion if you drop the device in a sink or toilet. The device will survive these events without damage if you dry it afterward.
The rating does not cover intentional, prolonged water exposure. Fitbit's own documentation states that the Versa 4 is not suitable for water sports, swimming, or any activity where the device is submerged for extended periods. The seals that protect the internal circuitry are designed to handle brief contact, not sustained pressure or repeated cycles of wetting and drying.
Why You Should Not Wear It in the Shower
Showers present two problems that the 50-meter rating does not account for: heat and soap. Hot water softens the rubber seals around the device's openings, making them less effective at keeping water out. Soap and shampoo can also degrade these seals over time, even if water does not when ready penetrate.
If you accidentally wear the Versa 4 in the shower, remove it as soon as you realize it and dry it thoroughly with a soft cloth. Do not use heat to dry it — air drying at room temperature is safer. If water appears under the screen or the device behaves strangely afterward, stop using it and let it dry completely for at least 24 hours before turning it back on.
Swimming, Chlorine, and Salt Water
Do not wear the Fitbit Versa 4 while swimming. Chlorine in pools and salt in ocean water are corrosive to the metal contacts and seals inside the device. Even though the device is water-resistant, these chemicals can cause corrosion that leads to malfunction weeks or months after exposure. Chlorine can also discolor the band and degrade the adhesive that holds components together.
If the Versa 4 accidentally goes into a pool or ocean, remove it when ready and rinse it with fresh water. Dry it completely and do not use it for at least 24 hours. If it stops working or shows signs of corrosion (discoloration, spots on the screen, or unresponsive buttons), contact Fitbit support — water damage from chlorine or salt is usually not covered under warranty, but Fitbit may offer repair options.
How to Dry the Device If It Gets Wet
If the Versa 4 gets wet, the first step is to dry the outside when ready with a soft, lint-free cloth. Pay special attention to the seams, the charging port, and the spaces between the band and the case. These areas trap water and take longer to dry.
After wiping the outside, leave the device in a warm, dry place for at least 2 to 4 hours. Do not use a hair dryer, oven, or direct sunlight — these can damage the screen or battery. If water is visible under the screen or the device does not respond to touch after drying, do not charge it. Charging a wet device can cause a short circuit. Instead, let it air-dry for a full 24 hours, then try turning it on. If it still does not work, contact Fitbit support.
Signs of Water Damage and What to Do
Water damage may not appear when ready. Watch for these signs in the hours or days after the device gets wet: the screen becomes unresponsive or sluggish, condensation appears under the screen that does not go away, the device will not turn on, or the battery drains much faster than usual. You may also notice discoloration around the charging port or a faint smell of corrosion.
If you notice any of these signs, stop using the device and do not charge it. Fitbit's support team can assess whether the damage is repairable or whether the device needs to be replaced. Keep the device powered off and in a dry place while you wait for support. Do not attempt to open the device yourself — this will void any remaining warranty coverage.
Protecting Your Versa 4 During Water Activities
If you plan to be around water — at the beach, by a pool, or during water sports — remove the Versa 4 and store it in a dry bag or leave it at home. This is the only way to may provide it will not be damaged by water, salt, or chlorine. Some users keep a waterproof case or armband for the device, but these add bulk and are not necessary for everyday use.
For tracking water-based activities, consider that the Versa 4 can record exercise data if you start a workout before removing it and then put it back on afterward. The device will not track your exact movements in the water, but it will log the time and estimated calories burned based on your heart rate. This is a reasonable compromise if you want to record that you swam without risking the device itself.
Frequently Asked Questions
Can I wear my Fitbit Versa 4 in the pool?
No. The 50-meter water resistance rating does not cover swimming. Chlorine and prolonged submersion can damage the seals and corrode internal components. Remove the device before entering the pool.
What happens if my Versa 4 gets wet in the rain?
Light rain is fine — the device is designed to handle that. Dry it with a soft cloth when you come inside. If it was exposed to heavy rain or got soaked, dry it thoroughly and monitor it for the next 24 hours to make sure it works normally.
Is my Versa 4 still under warranty if water damages it?
Water damage is typically not covered by Fitbit's standard warranty. However, contact Fitbit support with details about how the damage occurred — they may offer repair or replacement options depending on the situation and your purchase date.
Can I wear the Versa 4 while washing my hands?
Yes. Brief contact with cool tap water is well within the device's water resistance rating. Just dry your wrist and the device afterward to prevent moisture from sitting on the skin.
What should I do if water gets trapped under the screen?
Turn off the device when ready and do not charge it. Let it air-dry in a warm, dry place for 24 hours. If the condensation does not clear after drying, contact Fitbit support — water inside the screen usually requires professional service.