Most Fitbit models are water-resistant, not waterproof, and the depth rating depends on which device you own
The difference matters because water-resistant means your Fitbit can handle splashes and brief submersion, but waterproof means it can survive full immersion without damage. Fitbit uses the term "water-resistant" for nearly all its current trackers and smartwatches, and each model has a specific depth rating — usually measured in atmospheres (ATM) or meters. A rating of 5 ATM, for example, means the device can handle water pressure equivalent to 50 meters deep, though Fitbit recommends against intentional diving with any tracker.
Your actual model number determines what you can do with it in water. Some Fitbits are rated only for sweat and splashes, while others handle swimming and snorkeling. Checking your device's specifications before you wear it in water prevents damage that Fitbit's warranty does not cover.
Key Takeaways
- Fitbit uses "water-resistant" for most models, with ratings ranging from 3 ATM (splash-proof only) to 5 ATM (swim-safe), not "waterproof."
- A 5 ATM rating means the device handles water pressure at 50 meters depth, but Fitbit advises against diving or high-impact water sports.
- Fitbit Charge and Inspire models typically have 5 ATM ratings and are safe for swimming, while some older or budget models have lower ratings.
- Saltwater, chlorine, and hot water can damage the seals over time, so rinse your Fitbit with fresh water after beach or pool use.
- Water damage from submersion beyond the rated depth or from pressure jets is not covered by Fitbit's standard warranty.
Water-Resistance Ratings and What They Mean
Fitbit rates water resistance using the ATM scale, where 1 ATM equals the pressure of water at sea level. A 3 ATM rating means the device resists water pressure equivalent to 30 meters depth, though you should not intentionally submerge it that deep. A 5 ATM rating, which most current Fitbits carry, means it can handle 50 meters of pressure — enough for swimming and snorkeling but not diving.
The ATM number does not tell you how long the device can stay underwater safely. Fitbit recommends keeping any tracker submerged for no more than 30 minutes at a time, even if the rating is 5 ATM. The seals that keep water out degrade with repeated exposure, so a device rated for 5 ATM today may not be safe at that depth after a year of daily swimming.
Some Fitbit models carry a 1 ATM or 3 ATM rating instead. These are splash-resistant only and should not be worn while swimming or showering. Check your device's manual or Fitbit's website to find your exact model's rating before you wear it near water.
Which Fitbit Models Are Safe for Swimming
Fitbit Charge 6, Charge 5, and Inspire 3 all carry 5 ATM ratings and are safe for swimming. These are the most common current models, and you can wear them in a pool or ocean without worry about water damage from normal swimming. The Fitbit Sense 2 and Versa 4 smartwatches also have 5 ATM ratings and track your swim workouts automatically.
Older Fitbit models vary widely. The Fitbit Flex 2 was one of the first swim-safe trackers with a 5 ATM rating, but the original Flex, Charge, and Charge HR had only 1 ATM ratings and should not be worn while swimming. If you own an older model, look up the specific name and year on Fitbit's support site to confirm its rating.
Budget or entry-level Fitbits sometimes have lower ratings. The Fitbit One and Zip, for example, are splash-resistant only. Always check the product page or manual for your exact model before swimming — the name alone does not tell you the rating.
What Happens When Water Damage Occurs
If you submerge a Fitbit beyond its rated depth or expose it to pressure from a jet or hose, water can seep past the seals and damage the battery, circuit board, or sensors. The device may stop responding, show a blank screen, or fail to charge. Once water gets inside, the damage is usually permanent and cannot be repaired.
Fitbit's standard warranty does not cover water damage from submersion beyond the rated depth, pressure jets, or saltwater exposure. If your device fails after water exposure, Fitbit may offer a replacement at a discount, but you will not receive a free replacement. Some credit cards or homeowners' insurance policies cover accidental damage, so check your coverage before you pay for a replacement out of pocket.
Caring for Your Fitbit Around Water
Rinse your Fitbit with fresh water after swimming in a pool or ocean. Chlorine and salt corrode the seals and metal contacts over time, even on devices rated for 5 ATM. Dry it completely with a soft cloth before you charge it — do not use a hair dryer or place it near direct heat, which can damage the battery.
Remove your Fitbit before showering if it has a rating below 5 ATM. Even splash-resistant devices can take in water from prolonged steam or hot water, which can weaken the seals. If your device gets wet unexpectedly, turn it off and let it air-dry for at least 24 hours before you charge it again.
Avoid wearing your Fitbit during high-impact water sports like surfing, water skiing, or diving. The force of the water can exceed the pressure rating even on a 5 ATM device. Fitbit also recommends removing your tracker before using a pressure washer or taking a sauna, as heat and pressure can both damage the seals.
Checking Your Fitbit's Water-Resistance Rating
Find your device's rating on the product page or in the manual that came with it. On Fitbit's website, search for your model name — for example, "Fitbit Charge 6 water resistance" — and the rating will appear in the specifications section. The manual usually lists the rating on the first or last page.
If you bought your Fitbit used or do not have the manual, look at the back of the device for a model number, then search that number on Fitbit's support site. You can also contact Fitbit support directly with your device's model number, and they will tell you the exact rating and what activities are safe.
Frequently Asked Questions
Can I wear my Fitbit in the shower?
It depends on your model's rating. Fitbits with 5 ATM ratings can handle shower water, though Fitbit recommends removing it to extend the life of the seals. Models with 3 ATM or lower ratings should not be worn in the shower, as steam and prolonged water exposure can damage them.
Is my Fitbit safe for snorkeling?
A 5 ATM rating is safe for snorkeling, which typically involves depths under 10 meters. Do not dive deeper than that, and do not use your Fitbit for scuba diving — the pressure at depth exceeds what the device is designed to handle, even with a 5 ATM rating.
What should I do if my Fitbit gets wet by accident?
Turn it off when ready and let it air-dry for at least 24 hours before you charge it. Do not use heat to speed up drying. If the device was submerged beyond its rated depth, contact Fitbit support to discuss repair or replacement options.
Does water resistance get worse over time?
Yes. The seals that keep water out degrade with repeated exposure to water, heat, and chemicals like chlorine and salt. A device rated for 5 ATM when new may not be as reliable after a year of daily swimming. Rinsing with fresh water and drying thoroughly after each use slows this process.
Can I use my Fitbit at the beach?
Yes, if it has a 5 ATM rating. Rinse it with fresh water when ready after leaving the beach to remove salt, which corrodes the seals and metal contacts. Dry it completely before you charge it or wear it again.