The Fitbit Ace LTE has water resistance, not waterproofing

The Fitbit Ace LTE is water-resistant to 50 meters, which means it can handle splashes, rain, and brief submersion in water. It is not waterproof. The difference matters: water-resistant means water won't damage it under normal conditions up to a certain depth, but waterproof means it can be submerged indefinitely without harm. The Ace LTE's 50-meter rating is enough for swimming in a pool or ocean, but not for diving or water sports where the device might be held under pressure for extended periods.

Fitbit rates the device for "swimming and snorkeling" specifically. This means you can wear it while doing laps or playing in shallow water. The 50-meter rating comes from the ATM (atmospheres) standard used across the watch industry—50 meters equals roughly 5 ATM, a common threshold for recreational water use.

Key Takeaways

  • The Fitbit Ace LTE is water-resistant to 50 meters, so it is safe to wear while swimming in pools and oceans.
  • Water-resistant does not mean waterproof—the device should not be used for diving, high-pressure water sports, or extended underwater activities.
  • You should rinse the device with fresh water after saltwater exposure to prevent corrosion of the seals.
  • The touchscreen may become unresponsive temporarily if water gets trapped under the glass, but this usually clears on its own.

What the 50-meter rating actually covers

A 50-meter water-resistance rating means the device can withstand water pressure equivalent to being 50 meters underwater in a lab test. In real life, this translates to safe use in swimming pools, lakes, and ocean water at normal depths. You can wear the Ace LTE while doing freestyle laps, treading water, or wading—activities where the device is submerged but not under sustained pressure.

The rating does not cover activities where water is forced into the device at high speed or pressure. Jet skiing, diving, or using a pressure washer near the watch can force water past the seals. Similarly, hot water (like a hot tub or sauna) can degrade the seals faster than cold or room-temperature water.

Saltwater and chlorine: what to do after exposure

The Ace LTE can handle saltwater, but salt and chlorine corrode the metal components and seals over time. After swimming in the ocean or a chlorinated pool, rinse the device under fresh running water for a few seconds. This removes salt crystals and chlorine residue that would otherwise sit on the metal and eat away at the seals.

Pay special attention to the edges where the band meets the watch body and around the charging contacts on the back. These are where water and salt tend to collect. If you notice corrosion (white or green discoloration) forming around the seals, the device may need service.

Signs that water has gotten inside the device

If water breaches the seals, you may see condensation under the screen or notice the touchscreen becomes unresponsive. Condensation usually clears on its own within a few hours as the device dries. If it persists for more than a day, or if the screen stays unresponsive, the seals may have failed.

Do not try to open the device or use heat (like a hair dryer or oven) to dry it faster. Heat can damage the battery and internal components. Instead, leave it in a warm, dry room with good air circulation. If the problem does not resolve, contact Fitbit support—the device may be repairable or replaceable under warranty.

When to remove the Ace LTE before water exposure

Take off the watch before diving, snorkeling with your head underwater for extended periods, or using high-pressure water equipment. Avoid wearing it in hot tubs, saunas, or steam rooms, where heat and moisture can degrade the seals faster. If you are doing water aerobics or water polo—activities with repeated impacts and pressure changes—consider removing it to be safe.

You should also remove the device before showering if you have a habit of directing the showerhead directly at your wrist or if your shower has very high water pressure. Normal showering is fine, but prolonged exposure to pressurized hot water is not ideal for the seals.

How water resistance degrades over time

The seals that make the Ace LTE water-resistant are rubber gaskets that wear out with use and age. Repeated exposure to water, salt, chlorine, and temperature changes all speed up this wear. After a year or two of regular swimming, the seals may no longer provide the same level of protection. Fitbit does not publish a specific lifespan for the seals, but it is reasonable to expect them to last longer if you rinse the device after saltwater use and avoid extreme temperatures.

If you swim frequently—several times a week—plan to have the device serviced or replaced within two to three years. If you swim occasionally, the seals should hold up longer. There is no way to replace the seals yourself; Fitbit would need to do it, and it may be cheaper to replace the device.

Frequently Asked Questions

Can I wear the Fitbit Ace LTE in a hot tub?

No. Hot water degrades the rubber seals faster than cold water. The combination of heat and moisture can cause the seals to fail, allowing water inside the device. Stick to pools and natural water bodies at normal temperatures.

Will the Ace LTE track my swimming workouts?

Yes. The device recognizes swimming as an activity and logs laps, duration, and calories burned. The water resistance is sufficient for this purpose—you do not need to remove it during a swim.

What should I do if water gets trapped under the screen?

Leave the device in a warm, dry room and wait. Condensation usually clears within a few hours as the moisture evaporates. Do not use heat sources like hair dryers. If it does not clear after a full day, contact Fitbit support.

Is the Fitbit Ace LTE safe to wear in the ocean?

Yes, but rinse it with fresh water afterward. Saltwater can corrode the seals and metal components over time. A quick rinse under the tap removes salt crystals and extends the life of the seals.

Can I wear the Ace LTE while showering?

Yes, normal showering is fine. Avoid directing a high-pressure showerhead directly at the device or showering in very hot water repeatedly. If you shower daily, the seals will wear out faster than if you wear the device only during swimming.