Your Fitbit stops tracking sleep when the device loses contact with your wrist, the battery drains too far, or the sleep-tracking feature gets turned off in settings
Sleep tracking on Fitbit relies on three things working together: the device must stay in contact with your skin, the battery must have enough charge, and the feature must be enabled in your account settings. When any of these breaks, your Fitbit records your night as awake time instead of sleep. The good news is that most causes are fixable in minutes without calling support.
The most common culprit is a loose or shifted band. Fitbit tracks sleep by detecting your heart rate and movement patterns, and it cannot do that if the device is sitting loose on your wrist or has slipped toward your hand. A band that was snug yesterday may loosen overnight as your wrist swells slightly during sleep or as the band stretches with wear.
Key Takeaways
- A loose or shifted band is the single most common reason Fitbit stops recording sleep, because the device needs skin contact to detect your heart rate.
- If your battery is below 5 percent, Fitbit disables sleep tracking automatically to preserve power for basic functions.
- Sleep tracking can be turned off accidentally in the Fitbit app under your device settings, and turning it back on takes one tap.
- If your Fitbit is more than three years old, the battery may no longer hold a charge long enough to track a full night.
- Restarting your Fitbit and syncing it with the app clears temporary glitches that sometimes prevent sleep data from uploading.
Check that your band is snug and positioned correctly
Before troubleshooting anything else, take off your Fitbit and put it back on. Position the device on the inside of your wrist, about half an inch below your wrist bone. The band should be snug enough that you cannot slide it more than a quarter inch in any direction, but not so tight that it cuts off circulation or leaves marks after you remove it.
If your band has stretched or loosened, you may need to move it to a tighter notch or hole. Some Fitbit bands also have a secondary strap or adjustment mechanism—check your device manual to see if yours does. If the band itself is damaged, cracked, or no longer holds tension, you will need to replace it with an official Fitbit band or a compatible third-party option.
Wear your Fitbit for at least three full nights with the band positioned correctly before deciding the problem is something else. Sometimes it takes a few nights for the device to recalibrate and start recording sleep again.
Charge your Fitbit to at least 20 percent battery
Fitbit disables sleep tracking when the battery drops below 5 percent. If your device is showing a low-battery warning, plug it in when ready. Even if the battery icon shows 10 or 15 percent, charging to at least 20 percent gives the device enough power to track a full night of sleep without shutting down mid-sleep.
Use the official Fitbit charging cable that came with your device. Third-party cables sometimes charge more slowly or unreliably. Plug the device in for at least two hours, or until the battery icon shows a full charge. After charging, sync your Fitbit with the app before bed to make sure it is ready to track.
If your Fitbit battery drains completely within a day or two of charging, the battery itself may be failing. Fitbit batteries typically last three to four years before they stop holding a charge. If your device is older than that and drains quickly, a battery replacement or new device may be necessary.
Turn sleep tracking back on in the Fitbit app
Sleep tracking can be disabled accidentally in your account settings. Open the Fitbit app, tap the profile icon in the bottom right, and select your device. Scroll down to find "Sleep" or "Sleep Tracking" and make sure the toggle is turned on (it should be blue or green, not gray).
If the toggle was off, turn it on and sync your Fitbit with the app. Your device should start tracking sleep that same night. Some older Fitbit models also have a sleep mode button on the device itself—check your manual to see if yours does, and make sure it is not accidentally activated.
Restart your Fitbit and resync with the app
A temporary software glitch can prevent your Fitbit from recording or uploading sleep data. Restarting the device clears these glitches. The restart process varies by model, so check your device manual for the exact steps, but most Fitbits restart by holding a button for 10 to 15 seconds until you see the Fitbit logo on the screen.
After restarting, open the Fitbit app and tap the sync button (usually a circular arrow icon). Wait for the sync to complete—it should take less than a minute. Once synced, wear your Fitbit to bed that night and check the app in the morning to see if sleep data appears.
If sleep data still does not show up after a restart and resync, try uninstalling and reinstalling the Fitbit app. Sometimes the app itself becomes corrupted and needs a fresh install. Before uninstalling, make sure you remember your Fitbit account login, because you will need it to sign back in.
Check for software updates on your device and app
Fitbit releases updates that fix bugs, including sleep-tracking problems. Open the Fitbit app and go to your device settings to see if an update is available. If one is, connect your Fitbit to a charger and to Wi-Fi (if your model supports it), then install the update. Do not remove the device from the charger until the update is complete.
Also check that your Fitbit app itself is up to date. Open your phone's app store, search for Fitbit, and tap "Update" if one is available. Outdated app versions sometimes have bugs that prevent sleep data from syncing correctly.
Know when to contact Fitbit support
If you have tried all the steps above and your Fitbit still is not tracking sleep, the device may have a hardware problem. Contact Fitbit support through the app or at fitbit.com/support. Have your device model number and serial number ready—you can find these in the app under your device settings.
If your Fitbit is still under warranty (usually one year from purchase), Fitbit may replace it at no cost. If it is out of warranty, they can tell you the cost of a replacement or repair. Keep your receipt or order confirmation handy, because Fitbit will ask for proof of purchase.
Frequently Asked Questions
Why does my Fitbit show I was awake all night when I was definitely sleeping?
This usually means the device lost skin contact or the band shifted during the night. Check that your band is snug and positioned correctly on your wrist. It can also happen if your battery was very low—charge to at least 20 percent before bed.
Can I manually log sleep if my Fitbit did not track it?
Yes. Open the Fitbit app, go to the Sleep tile, and tap the plus icon to add sleep manually. Enter the time you went to bed and woke up, and the app will record it. This does not fix the tracking problem, but it keeps your sleep data complete while you troubleshoot.
Does turning off sleep tracking save battery?
Slightly, but not enough to matter. Sleep tracking uses very little power compared to continuous heart-rate monitoring or GPS. If your battery is draining fast, the problem is something else—check your device settings for features like constant heart-rate monitoring or Wi-Fi sync, which drain much more power.
What if my Fitbit tracks sleep some nights but not others?
This usually points to an inconsistent band fit. Your wrist size changes slightly throughout the day and night depending on hydration and activity, so a band that fits perfectly one night may be loose the next. Try tightening the band one notch and wearing it consistently for a week to see if tracking improves.
How long does it take Fitbit to start tracking sleep again after I fix the problem?
Your Fitbit should track sleep the very next night after you fix the issue. If it does not, give it two or three more nights—sometimes the device needs a few nights to recalibrate after a band adjustment or restart.