A red X on your Fitbit means the device has lost its connection to your phone or the Fitbit servers, or the battery is critically low
The red X appears in the top corner of your Fitbit's screen when something is blocking normal operation. Most often it signals a connection problem — your watch or band can no longer reach your phone via Bluetooth, or your phone cannot reach Fitbit's servers. Less commonly, it means your battery has dropped so low that the device is shutting down non-essential functions. The fix depends on which problem you have, and most of them take just a few minutes.
The red X is not a permanent failure. It is a status indicator, like a warning light on a car dashboard. Once you restore the connection or charge the device, the X should disappear and your Fitbit will resume normal operation.
Key Takeaways
- A red X usually means your Fitbit has lost Bluetooth connection to your phone or cannot reach Fitbit's servers.
- Restarting your Fitbit and your phone, in that order, fixes the connection problem in most cases.
- If the red X persists after a restart, check that Bluetooth is turned on, that your phone's Fitbit app is up to date, and that you are within 30 feet of your phone.
- A red X combined with a low battery warning means you should charge your device when ready.
- If the red X remains after charging and restarting both devices, you may need to unpair and re-pair your Fitbit in the app.
Restart your Fitbit first, then your phone
The fastest fix is a restart. Power down your Fitbit completely, wait 10 seconds, then turn it back on. The method depends on your model: on most Fitbit watches and bands, you hold the button on the left side until you see a power-off menu or the screen goes black. On some older models like the Charge 4, you swipe down from the top of the screen and tap the power icon. Check your device's manual if you are unsure which button to hold.
Once your Fitbit has restarted, restart your phone as well. This clears any stalled Bluetooth connection on both ends. After both devices are back on, wait 30 seconds for them to find each other again. The red X should disappear once they reconnect.
Check Bluetooth and app settings on your phone
If the red X is still there after a restart, verify that Bluetooth is actually turned on. On most phones, swipe down from the top of the screen twice to open the full quick-settings menu and look for the Bluetooth icon. It should be highlighted or show as "on." If it is off, tap it to turn it on.
Next, open the Fitbit app on your phone and check that it is the current version. On iPhone, open the App Store, tap your profile icon in the top right, scroll down to "Available Updates," and look for Fitbit. On Android, open Google Play, search for Fitbit, and if an "Update" button appears, tap it. An outdated app sometimes cannot communicate properly with your device.
Make sure you are within 30 feet of your phone. Fitbit uses standard Bluetooth, which has a range of about 30 feet in open space. Walls, metal objects, and other wireless devices can reduce that range. If you are far from your phone, move closer and wait a minute for the connection to re-establish.
Charge your Fitbit if the battery is very low
If your Fitbit shows a low battery warning along with the red X, the device may be shutting down to preserve power. Plug it into its charging cable right away. Most Fitbit devices charge fully in one to two hours. Once the battery reaches a safe level, the red X should clear on its own.
If you do not have the original charging cable, you can buy a replacement from Fitbit's website or from electronics retailers. Using a non-Fitbit cable can damage the device, so stick with the official one.
Unpair and re-pair your Fitbit if the problem persists
If the red X remains after restarting both devices, updating the app, and confirming Bluetooth is on, the connection may be corrupted. The fix is to unpair your Fitbit from the app and then pair it again, which forces your phone and device to re-establish the connection from scratch.
Open the Fitbit app, tap your profile icon (usually in the top left or bottom right depending on your phone), find your device in the list, and tap the gear icon next to it. Look for an option that says "Unpair" or "Remove Device" and tap it. Confirm when the app asks. Your Fitbit will no longer be connected to your phone.
Now put your Fitbit into pairing mode. On most devices, this means holding the button on the left side for three seconds until you see a pairing screen or a spinning icon. Open the Fitbit app again and tap the plus icon or "Set Up Device" to start the pairing process. Follow the on-screen steps. Once pairing is complete, the red X should be gone.
When to contact Fitbit support
If the red X persists after you have restarted both devices, updated the app, confirmed Bluetooth is on, charged your Fitbit, and unpaired and re-paired it, the device may have a hardware problem. Contact Fitbit's support team through the app (tap your profile icon and look for "Help" or "Contact Us") or visit Fitbit's website. Have your device's serial number ready — you can find it in the app under your device settings.
Fitbit's support team can run diagnostics and determine whether the device needs repair or replacement. If your Fitbit is still under warranty, repair or replacement may be free.
Frequently Asked Questions
Does the red X mean my Fitbit is broken?
Not necessarily. The red X is usually a connection problem, not a hardware failure. Most of the time a restart fixes it. Only if the X remains after restarting, updating the app, and re-pairing should you suspect a hardware issue.
Can I still see my steps and heart rate when the red X is showing?
Your Fitbit still tracks data while the red X is displayed — the device is still counting steps and recording heart rate. You just cannot sync that data to your phone or see it in the app until the connection is restored. Once you fix the connection, all the data will upload automatically.
Why does my Fitbit keep losing connection even after I fix it?
Repeated disconnections usually mean Bluetooth interference in your environment, an outdated phone operating system, or a problem with the Fitbit app itself. Try keeping your phone and Fitbit closer together, restart both devices once a week, and make sure your phone's operating system is current. If the problem continues, uninstall and reinstall the Fitbit app.
What if the red X appears right after I charge my Fitbit?
Sometimes a full charge can trigger a temporary connection glitch. Restart your Fitbit and your phone in that order, then wait 30 seconds. If the X is still there, try unpairing and re-pairing as described above.