Your Fitbit stops tracking sleep when the device loses contact with your wrist, the battery dies, or the sleep-tracking feature is turned off in the app settings

Fitbit tracks sleep by detecting your wrist movements and heart rate patterns while you wear it. If your Fitbit shows zero sleep data or gaps in your sleep log, the most common causes are a loose band, a dead or low battery, airplane mode turned on, or sleep tracking disabled in your account settings. The device needs skin contact and enough battery power to detect when you fall asleep and wake up.

Before troubleshooting, check whether your specific Fitbit model even records sleep automatically. Older models like the Fitbit One and Fitbit Zip require you to manually start sleep mode by pressing a button. Newer models like the Charge, Inspire, and Sense track sleep automatically as long as the device stays on your wrist and has power.

Key Takeaways

  • A loose or improperly fitted band breaks the skin contact your Fitbit needs to detect sleep, so tighten it before bed and make sure it sits directly on your wrist.
  • Low battery drains faster during sleep tracking, so charge your device to at least 50 percent before expecting accurate overnight data.
  • Airplane mode and Do Not Disturb mode can interfere with sleep detection, so turn both off in your Fitbit app settings.
  • Sleep tracking must be enabled in your Fitbit app under your device settings, and some older models require manual sleep mode set up.
  • If your Fitbit still shows no sleep data after these fixes, restart the device by holding the button for 10 seconds, then sync it to your phone.

Check your band fit and skin contact

Your Fitbit cannot detect sleep if it is not touching your skin consistently. A band that is too loose slides around your wrist during the night, breaking the contact the sensors need. Tighten the band so it sits snugly but not painfully — you should be able to fit one finger underneath when you press down.

Sweat, lotion, and dry skin can also interfere with the sensor reading. Wash your wrist and the underside of the device with soap and water, dry both completely, and refit the band. If you wear your Fitbit over a sleeve or under clothing, move it to bare skin before bed. Some users find that wearing the device slightly higher on the forearm, rather than at the wrist bone, improves detection.

Charge your Fitbit to at least 50 percent

A low battery causes your Fitbit to skip sleep tracking to conserve power. Charge your device fully before bed, or at minimum to 50 percent. Most Fitbit models take one to two hours to charge completely using the included USB cable or charging dock.

If your Fitbit battery drains unusually fast, check whether you have enabled continuous heart rate monitoring or GPS tracking, both of which drain the battery much quicker than normal use. You can turn these off in your Fitbit app under device settings to extend battery life between charges.

Turn off airplane mode and Do Not Disturb

Airplane mode disables the Bluetooth connection between your Fitbit and your phone, which can prevent sleep data from syncing and sometimes stops sleep detection altogether. Check your Fitbit app settings and make sure airplane mode is off. The same applies to Do Not Disturb mode — turn it off in your device settings if sleep tracking is not working.

After you turn off either setting, sync your Fitbit to your phone by opening the Fitbit app and pulling down to refresh. This forces the device to send any pending data and reconnect properly.

Enable sleep tracking in your app settings

Sleep tracking must be turned on in your Fitbit app. Open the app, tap your profile icon, select your device, scroll down to Sleep, and make sure the toggle is switched on. Some Fitbit models also let you set a sleep schedule — the device will automatically detect sleep during those hours, which can improve accuracy.

If you have a Fitbit One, Fitbit Zip, or other older model, sleep tracking is manual. You must press the button on the device to start sleep mode before bed and press it again when you wake up. Newer models do this automatically, so check your device manual if you are unsure whether yours requires manual set up.

Restart your Fitbit and resync it to your phone

A restart clears temporary software glitches that can block sleep tracking. Hold down the button on your Fitbit for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then release. The device will restart — this takes about 30 seconds.

Once the restart is complete, open your Fitbit app and sync your device by pulling down to refresh. Wait for the sync to finish, then wear your Fitbit to bed as normal. Sleep data should appear in your app by morning. If it still does not, try restarting your phone as well, then sync again.

Update your Fitbit firmware and app

Outdated firmware or app versions sometimes cause sleep tracking to fail. Open your Fitbit app, go to your profile, select your device, and look for a firmware update option. If an update is available, connect your Fitbit to power and keep it near your phone while the update installs — this usually takes a few minutes.

Also check your phone's app store to see whether a newer version of the Fitbit app is available. Install any pending updates, then restart your phone and sync your device again. Keeping both the app and firmware current prevents many tracking problems.

Frequently Asked Questions

Why does my Fitbit show sleep data but the hours seem wrong?

Fitbit calculates sleep based on movement and heart rate, so it may count periods of stillness as sleep even if you were awake and lying still. Conversely, restless nights with frequent movement may show fewer hours than you actually slept. You can manually edit sleep entries in the app by tapping the sleep tile, selecting the entry, and adjusting the start and end times.

Can I wear my Fitbit over a long-sleeve shirt and still track sleep?

No. The sensors need direct skin contact to detect your heart rate and movement patterns. Wear your Fitbit on bare skin, or remove your sleeve before bed. Even a thin layer of fabric can block the sensor reading.

What if my Fitbit tracks sleep some nights but not others?

This usually means the band fit is inconsistent — it may be loose on some nights and tight on others. Check that you are tightening it the same way each night. Also check your battery level; if it drops below 20 percent, sleep tracking may stop working until you charge it.

Does my Fitbit need to be connected to my phone to track sleep?

No. Your Fitbit stores sleep data on the device itself and syncs it to your phone when you open the app. However, airplane mode should be off so the device can sync when you are ready to check your data.

Why is my Fitbit showing sleep from times I was definitely awake?

Fitbit uses movement and heart rate to guess when you are asleep, so it can misread periods of stillness or relaxation as sleep. If the data is consistently wrong, try wearing the device slightly higher on your forearm or adjusting the band tightness. You can also manually edit entries in the app to correct the record.