Your Fitbit stops updating when the connection between the device and the app breaks

A Fitbit that won't update usually has a broken link between the tracker and your phone or computer. The device itself is still counting steps and recording heart rate, but that data isn't reaching the app or the Fitbit servers. The most common causes are a dead battery, Bluetooth turned off on your phone, the app running an old version, or the device paired to a different phone than the one you're using now.

The fix depends on which part of the chain is broken. Start with the simplest checks — battery level and Bluetooth — before moving to app settings or re-pairing the device.

Key Takeaways

  • Check your Fitbit's battery level first; a device below 5 percent charge will not sync even if it appears to be working.
  • Turn Bluetooth off and back on in your phone's settings, then open the Fitbit app to force a fresh connection attempt.
  • Update the Fitbit app through your phone's app store, since old versions often lose the ability to sync with newer device firmware.
  • If the tracker is paired to a different phone, you must unpair it from the old device before it will sync to the new one.
  • Restarting your Fitbit by holding the button for 10 to 15 seconds clears temporary glitches that prevent syncing.

Check the battery level on your Fitbit

A Fitbit with very low battery will not sync, even though the screen may still light up when you tap it. Open the Fitbit app and look at the device card — it shows the battery percentage. If the battery is below 5 percent, charge the device for at least 30 minutes before trying to sync again.

Charge your Fitbit using the cable that came with it. Plug the USB end into a wall adapter or computer port, and attach the charging clip to the metal contacts on the back of the device. The screen should show a lightning bolt or charging symbol. If it does not, try a different USB port or wall outlet — the charging cable itself may be damaged.

Turn Bluetooth off and on again on your phone

Bluetooth connections can freeze without either device knowing it. Go to your phone's settings, find Bluetooth, and turn it off completely. Wait 10 seconds, then turn it back on. Open the Fitbit app and wait 30 seconds for it to search for your device and sync.

If you have multiple Bluetooth devices nearby — headphones, smartwatch, car stereo — they can interfere with the Fitbit connection. Turn off other Bluetooth devices temporarily and try syncing again. Once the Fitbit syncs successfully, you can turn the other devices back on.

Update the Fitbit app to the latest version

The Fitbit app receives updates regularly, and older versions sometimes lose the ability to talk to newer device firmware. Open your phone's app store — the Apple App Store on iPhone or Google Play on Android — search for "Fitbit," and check whether an Update button appears next to the app name. If it does, tap Update and wait for it to finish.

After the app updates, close it completely and reopen it. This forces the app to load the new version fully. Then try syncing your device again. If you are not sure whether you have the latest version, uninstall the app and read it fresh from the app store.

Restart your Fitbit device

A temporary software glitch can prevent syncing even when the battery is charged and Bluetooth is on. Restart the device by holding down the button on the side or back for 10 to 15 seconds until the screen goes black and you see the Fitbit logo. Release the button and wait for the device to turn back on — this usually takes 10 seconds.

After the restart, open the Fitbit app and wait for it to sync. The app will search for your device automatically. If syncing still does not work, move on to checking whether the device is paired to the correct phone.

Check which phone your Fitbit is paired to

If you recently switched phones or borrowed someone else's device, your Fitbit may still be paired to the old phone. A Fitbit can only sync to one phone at a time. Open the Fitbit app on the phone you want to use, go to the device settings, and look for a "Pair" or "Set Up Device" option. If the app says the device is already paired, you must unpair it from the old phone first.

To unpair, open the Fitbit app on the old phone, find the device card, and look for a menu option (usually three dots) that says "Unpair" or "Remove Device." Tap it and confirm. Once unpaired, the device will no longer sync to that phone. Then open the Fitbit app on your new phone and pair the device there by following the on-screen prompts.

Sign out and sign back into the Fitbit app

Sometimes the app loses its connection to your Fitbit account even though the device is paired. Open the Fitbit app, go to the profile or settings section, and look for a "Sign Out" option. Tap it and confirm. Then close the app completely and reopen it. Sign back in with your Fitbit account email and password.

After signing back in, the app will search for your paired device and attempt to sync. This process usually takes 30 to 60 seconds. If the device still does not sync, try restarting your phone itself — hold the power button, turn it off, wait 10 seconds, and turn it back on. Then open the Fitbit app again.

Frequently Asked Questions

Why does my Fitbit sync sometimes but not other times?

Intermittent syncing usually means Bluetooth is dropping the connection. Keep your phone and Fitbit within 30 feet of each other, and avoid syncing in areas with heavy Wi-Fi or radio interference, such as near a microwave or in a crowded office. If the problem persists, restart both devices and update the Fitbit app.

Can I sync my Fitbit to more than one phone?

No. A Fitbit syncs to only one phone at a time. If you want to switch phones, you must unpair the device from the old phone first through the app settings. After unpairing, the device will not sync anywhere until you pair it to a new phone.

What if my Fitbit still won't sync after trying all these steps?

Try a factory reset by holding the button for 15 to 20 seconds until you see a reset screen, then confirm. This erases all data on the device but often fixes stubborn sync problems. After the reset, pair the device to your phone as if it were new. You will lose local data, but your account history remains in the Fitbit app.

Does my Fitbit need Wi-Fi to sync?

No. Fitbit syncs through Bluetooth to your phone, not through Wi-Fi. Your phone does not need to be connected to Wi-Fi or cellular data for the sync to happen, though the app will upload your data to Fitbit's servers once you have internet access.