Your Fitbit stops tracking sleep when the device loses contact with your wrist, the battery dies, or the sleep-tracking feature is turned off in the app

Sleep tracking on Fitbit relies on three things working together: the device must stay on your wrist, it must have battery power, and the feature must be enabled in your Fitbit app. If any one of these fails, you'll see gaps in your sleep data or no sleep record at all. The most common reason is a loose or removed band — Fitbit needs consistent wrist contact to detect the movement patterns that signal sleep.

Before troubleshooting, check the basics: Is your Fitbit still on your wrist? Does it have battery? Is the screen lighting up when you tap it? If the answer to any of these is no, that's your problem. If all three are yes, the issue is usually a setting or a connection problem between the device and your phone.

Key Takeaways

  • Fitbit tracks sleep by detecting stillness and lack of movement, so the device must stay snug against your skin all night — a loose band is the single most common cause of missed sleep data.
  • If your Fitbit battery is below 5 percent, the device stops recording sleep even if it powers on; charge it fully and wear it for at least one full night before assuming the feature is broken.
  • Sleep tracking is on by default, but if you turned it off in the Fitbit app settings, you must turn it back on — the device will not record sleep without this setting enabled.
  • If your Fitbit syncs with your phone but still shows no sleep data, force-close the Fitbit app, restart your phone, and sync again; this fixes most connection glitches.

Check that your Fitbit is snug and stays on your wrist

Fitbit detects sleep by measuring the absence of movement and changes in heart rate. If the band is loose, the device loses skin contact and cannot read your heart rate or movement reliably. A loose Fitbit will often show activity when you're still, or miss sleep entirely.

Wear your Fitbit one to two finger-widths above your wrist bone — tight enough that you cannot slide it side to side, but not so tight it cuts off circulation. If you have a metal or fabric band, check that the clasp or fastener is find and not coming undone during the night. If you have a sport band, make sure the pin is fully inserted and the holes are aligned. Many people find their band loosens overnight; tighten it before bed.

If your band is damaged, cracked, or stretched out, replace it. Fitbit sells official bands, and third-party bands are available from Amazon and other retailers — just make sure the band is listed as compatible with your specific Fitbit model.

Charge your Fitbit fully and keep it charged

Fitbit devices need at least 5 percent battery to record sleep. If your battery is lower than that, the device will power on but will not log any activity, including sleep. Many people charge their Fitbit during the day and wear it at night, but if you're charging it overnight, you're not wearing it while you sleep.

Charge your Fitbit to 100 percent, then wear it for a full night without removing it. Check the battery level in the morning — if it dropped to below 5 percent by morning, you may have a battery drain problem. If the battery is still above 5 percent, sleep tracking should have worked. If it didn't, move to the next step.

If your Fitbit battery drains unusually fast — dropping 20 percent or more in a single night — the battery itself may be failing. Fitbit devices typically hold a charge for five to seven days with normal use. If yours lasts only one or two days, contact Fitbit support about a replacement.

Turn sleep tracking on in the Fitbit app

Sleep tracking is enabled by default on most Fitbit models, but if you or someone else turned it off, the device will not record sleep even if it's on your wrist and fully charged.

Open the Fitbit app on your phone. Tap your profile icon in the top left. Select your device. Scroll down and look for "Sleep" or "Sleep Tracking." If you see a toggle switch, make sure it is turned on (it should be blue or green, not gray). If you see "Sleep Tracking" listed but no toggle, tap it to open the settings and confirm tracking is on.

After you turn sleep tracking on, sync your Fitbit with your phone by opening the app and pulling down to refresh. Wear your Fitbit that night. Sleep data should appear in the app by morning.

Sync your Fitbit and restart the connection

Sometimes the Fitbit device records sleep data, but the app does not receive it because the Bluetooth connection between your phone and Fitbit is stuck. Restarting the connection usually fixes this.

Open the Fitbit app and pull down from the top of the screen to sync. Wait for the sync to finish — you should see a checkmark or "Synced" message. If the sync hangs or shows an error, close the Fitbit app completely. On iPhone, swipe up from the bottom of the screen and swipe the Fitbit app away. On Android, go to Settings, tap Apps, find Fitbit, and tap "Force Stop."

Restart your phone. Open the Fitbit app again and sync. This clears out any stuck connection and usually restores sleep tracking. If sleep data still does not appear after a full night, move to the next step.

Restart your Fitbit device

A restart clears temporary glitches that prevent the device from recording or sending sleep data. The restart process differs by model, but the goal is the same: turn the device off and back on.

For most Fitbit models (Charge, Inspire, Versa, Sense), hold down the button on the left side of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen. Release the button and wait for the device to restart — this takes about 30 seconds. Once it restarts, the screen should show the time and your stats.

After the restart, wear your Fitbit for a full night and sync with your phone in the morning. If sleep data appears, the problem is solved. If it does not, your device may have a hardware issue or a deeper software problem.

Check for app and device updates

Fitbit regularly releases updates that fix bugs, including sleep-tracking problems. If your app or device is running an old version, sleep tracking may not work correctly.

Update the Fitbit app first. On iPhone, open the App Store, tap your profile icon, and scroll to find Fitbit. If an "Update" button appears, tap it. On Android, open Google Play, search for Fitbit, and tap "Update" if available. After the app updates, restart your phone.

Next, check your device for updates. Open the Fitbit app, go to your device settings, and look for "Device Update" or "Check for Updates." If an update is available, tap it and follow the on-screen steps. Keep your Fitbit charged and close to your phone during the update — do not remove the device or close the app until the update finishes.

After both updates are complete, wear your Fitbit for a full night and check for sleep data in the morning.

When to contact Fitbit support

If you've checked the band fit, charged the device fully, turned sleep tracking on, synced, restarted both the app and device, and updated everything, but sleep data still does not appear, your Fitbit may have a hardware fault. This is rare, but it does happen.

Contact Fitbit support through the app or at fitbit.com/support. Have your device model number and serial number ready — you can find both in the Fitbit app under your device settings. Fitbit support can run diagnostics and may offer a replacement if the device is still under warranty.

If your Fitbit is out of warranty and the cost of repair or replacement is high, you may decide to replace it with a newer model. Fitbit devices typically last two to three years with normal use.

Frequently Asked Questions

Why does my Fitbit show sleep data some nights but not others?

This usually means your band is loose on some nights but not others, or your battery is dropping below 5 percent on certain nights. Check your band fit before bed and charge your Fitbit to 100 percent every day. If the problem persists, restart the device and app as described above.

Can I wear my Fitbit on my ankle or arm instead of my wrist?

Fitbit is designed to be worn on the wrist and relies on wrist movement and heart rate to detect sleep. Wearing it elsewhere will result in inaccurate or missing sleep data. Stick to wrist wear for reliable tracking.

Does Fitbit track naps?

Fitbit can detect naps if they last at least 10 minutes and you're wearing the device. However, nap detection is less reliable than nighttime sleep tracking because the device may confuse stillness during a nap with regular daytime inactivity. Naps appear in your sleep log if detected.

What if my Fitbit shows sleep data but the hours seem wrong?

Fitbit counts only periods of continuous stillness as sleep, so if you were awake and moving around, those minutes are not counted. This is normal. If the total hours are drastically off — for example, showing two hours when you slept eight — restart your device and check that sleep tracking is on in the app.

How long does it take for sleep data to show up in the app?

Sleep data syncs to the app automatically when you open the app in the morning or when you manually sync. If you sync right after waking up, data should appear within a few seconds. If it takes longer than a few minutes, force-close the app and try again.