The most common reason your Fitbit stops syncing is that Bluetooth is turned off on your phone, the Fitbit app needs an update, or your devices have drifted too far apart—usually more than 30 feet. Start by turning Bluetooth off and back on, closing and reopening the Fitbit app, and moving your phone and Fitbit closer together. If that does not work, the next step is to forget the Fitbit in your phone's Bluetooth settings and re-pair it from scratch.

Key Takeaways

  • Bluetooth must be on for your phone and Fitbit to communicate, and it must stay on even when the app is closed.
  • The Fitbit app itself can become stuck and stop syncing; closing it completely and reopening it fixes this in most cases.
  • Fitbit devices lose connection if they move more than 30 feet from your phone, so distance is often the culprit.
  • Forgetting the device in your phone's Bluetooth menu and re-pairing it clears out connection problems that a straightforward restart cannot fix.
  • If nothing works, restarting your phone and restarting your Fitbit (by holding the button for 10 seconds) will reset the connection from both ends.

Check Bluetooth is on and stays on

Your phone's Bluetooth must be turned on for the Fitbit to send data. Open your phone's settings and look for Bluetooth under Connections or Wireless. Toggle it on if it is off. On iPhone, you can also swipe down from the top to open Control Center and tap the Bluetooth icon.

Bluetooth sometimes turns itself off after a few hours, especially if your phone is in battery-saver mode. Check your battery settings and turn off any aggressive power-saving features that disable Bluetooth automatically. If your phone is set to turn off Bluetooth when the screen locks, change that setting so Bluetooth stays active in the background.

Once Bluetooth is on, keep it on. The Fitbit app does not need to be open to sync, but Bluetooth does need to be running. If you turn Bluetooth off to save battery and then forget to turn it back on, your Fitbit will not sync until you do.

Close and reopen the Fitbit app completely

The Fitbit app can freeze or stop responding without showing an error. Close it entirely—do not just minimize it. On Android, swipe up from the bottom or use the back button to close the app completely. On iPhone, swipe up from the bottom of the screen to close it.

Wait 10 seconds, then open the Fitbit app again. This forces the app to start fresh and reconnect to your Fitbit. Many sync problems disappear after this straightforward step because the app was stuck waiting for a response that never came.

If closing and reopening does not work, try clearing the app's cache. On Android, go to Settings > Apps > Fitbit, tap Storage, and select Clear Cache. On iPhone, you may need to uninstall and reinstall the app instead, since iOS does not let you clear cache the same way.

Move your phone and Fitbit closer together

Fitbit devices use Bluetooth, which has a range of about 30 feet in open space. Walls, metal objects, and other electronics can reduce that range to 10 or 15 feet. If your phone is in another room or across the house, your Fitbit may be out of range and unable to sync.

Bring your phone and Fitbit within 10 feet of each other and try syncing again. Open the Fitbit app and look for a sync button—it is usually a circular arrow icon at the top of the screen. Tap it to force a sync attempt while the devices are close.

If syncing works when they are close but fails when they are far apart, your Bluetooth connection is weak. This can happen if your Fitbit battery is low or if there is interference from WiFi routers or other devices. Charge your Fitbit fully and try again.

Forget the device and re-pair it

If restarting the app and moving closer do not work, the Bluetooth pairing itself may be corrupted. Go to your phone's Bluetooth settings, find your Fitbit in the list of paired devices, and tap the option to forget or unpair it. On Android, press and hold the device name. On iPhone, tap the information icon next to the device name and select Forget This Device.

Once you have forgotten it, open the Fitbit app and start the pairing process again. The app will ask you to put your Fitbit in pairing mode—usually by holding the button for a few seconds until you see a light flash. Follow the on-screen prompts to pair the devices again.

This step clears out any corrupted connection data and forces your phone and Fitbit to establish a fresh Bluetooth link. It takes about two minutes but solves most stubborn sync problems.

Restart your phone and your Fitbit

If forgetting and re-pairing does not work, restart both devices. Turn your phone off completely, wait 10 seconds, and turn it back on. While your phone is restarting, restart your Fitbit by holding down its button for 10 seconds until the screen goes black and you see the Fitbit logo.

Once both devices have restarted, turn Bluetooth back on, open the Fitbit app, and try syncing again. A full restart clears out temporary glitches in both the phone's operating system and the Fitbit's firmware that a straightforward app close cannot fix.

After the restart, you may need to re-pair your Fitbit if it does not automatically reconnect. Follow the pairing steps in the Fitbit app just as you did when you first set it up.

Check for app and firmware updates

An outdated Fitbit app can have bugs that prevent syncing. Open your phone's app store—Google Play on Android or the App Store on iPhone—search for Fitbit, and check whether an update is available. If one is, install it and try syncing again.

Your Fitbit itself may also need a firmware update. Open the Fitbit app, go to your device settings, and look for an option to check for updates. If an update is available, connect your Fitbit to power and let it update. Do not interrupt the update or move the Fitbit away from your phone during this process.

Updates often fix sync problems that were affecting other users, so keeping both the app and your Fitbit's firmware current is worth doing even if you do not see an obvious bug.

Verify your phone's location and notification permissions

The Fitbit app needs permission to access Bluetooth and, on some phones, location services. Go to your phone's Settings, find Apps or process Manager, select Fitbit, and check Permissions. Make sure Bluetooth, Location, and Notifications are all turned on.

On Android, go to Settings > Apps > Fitbit > Permissions. On iPhone, go to Settings > Fitbit and toggle on the permissions the app needs. If any permission is off, turn it on and try syncing again.

Some phones also have a setting that restricts background activity for apps you do not use often. If you have not opened the Fitbit app in a while, your phone may have put it in a restricted state. Open the app, let it sync, and your phone should restore normal permissions.

Frequently Asked Questions

Why does my Fitbit sync sometimes but not other times?

Intermittent syncing usually means Bluetooth is turning off automatically or your phone and Fitbit are drifting in and out of range. Check your battery-saver settings to make sure they are not disabling Bluetooth, and keep your phone and Fitbit closer together during the day. If the problem happens at night, your Fitbit may be syncing while you sleep but failing during the day due to distance or interference.

Does the Fitbit app have to be open to sync?

No. The app does not need to be open, but Bluetooth must be on. Your Fitbit will sync whenever it comes within range of your phone and Bluetooth is active. However, you will not see the sync happen unless you open the app to check it.

What if my Fitbit is not showing up in Bluetooth settings at all?

If your Fitbit does not appear in your phone's Bluetooth list, it may not be in pairing mode. Hold the button on your Fitbit for 10 seconds until you see a light flash or the pairing screen appears. Then open the Fitbit app and follow the pairing instructions. If it still does not appear, restart your Fitbit and try again.

Can I sync my Fitbit to multiple phones?

A Fitbit can only be paired to one phone at a time. If you want to switch to a different phone, forget the Fitbit from the old phone's Bluetooth settings, then pair it to the new phone using the Fitbit app. You will need to log into the same Fitbit account on the new phone to see your data.

How long does it usually take to sync?

A sync usually takes 10 to 30 seconds once the connection is established. If syncing takes longer than a minute, the connection is probably weak or unstable. Move your phone and Fitbit closer together and try again.