Your Fitbit stops tracking sleep when the wristband is too loose, the battery is low, or sleep tracking is turned off in the app
A Fitbit that doesn't record your sleep usually has one of three problems: the device isn't snug enough on your wrist, the battery has dropped below 5 percent, or you've disabled sleep tracking in the Fitbit app. The most common culprit is fit. Your Fitbit needs to sit firmly against your skin to detect the movement and heart rate patterns that signal sleep. If you can slide it more than a finger's width up your arm, it won't register that you're asleep.
Less often, the device itself has a software glitch or the app needs to sync. This guide walks you through the fixes in order, starting with the easiest checks and moving to troubleshooting steps that take a few minutes.
Key Takeaways
- Wear your Fitbit snugly on your wrist—loose enough to be comfortable, but tight enough that you can only slide one finger underneath the band.
- Check that sleep tracking is enabled in the Fitbit app under your device settings, because it can be turned off accidentally.
- Charge your Fitbit to at least 5 percent battery, since low power disables sleep tracking on most models.
- Force-close and reopen the Fitbit app, then restart your device if sleep data still doesn't appear after a full night.
- Some Fitbit models require you to manually start sleep mode; check your device manual to see if yours is one of them.
Check that your Fitbit is worn correctly
The most frequent reason a Fitbit doesn't track sleep is that it's worn too loosely. Your device needs constant contact with your skin to measure your heart rate and detect movement. When the band is loose, the sensors lose that connection and the device can't tell whether you're asleep or awake.
Tighten the band so it sits snugly on the inside of your wrist, about half an inch above your wrist bone. You should be able to slide one finger—not two—underneath the band. This is tight enough to work but loose enough that it won't cut off circulation or feel uncomfortable during sleep. If your band has stretched out or the clasp no longer holds, you may need to replace it. Most Fitbit bands are sold separately and cost between $20 and $40.
Also check that you're wearing it on the correct wrist. Some Fitbit models default to the left wrist in the app settings. If you wear it on your right wrist but the app is set to left, the device may not sync sleep data properly. Open the Fitbit app, tap your profile picture, select your device, and look for a "Wrist" or "Dominant Hand" setting. Change it to match where you actually wear the band.
Verify sleep tracking is enabled in the app
Sleep tracking can be turned off in your Fitbit app settings, either by accident or because you disabled it to stop recording a particular night. If it's off, your device won't record any sleep data even if you wear it correctly.
Open the Fitbit app and tap your profile picture in the top left corner. Select your device name. Scroll down and look for "Sleep" or "Sleep Tracking." Make sure the toggle is switched on (it should be blue or green, not gray). If it was off, turn it on and wear your Fitbit to bed that night. Sleep data should appear in the app by morning.
Some Fitbit models, including older Charge and Inspire versions, require you to manually start sleep mode by holding down the button before bed. Check your device manual or the Fitbit support page for your specific model to see if this applies to you. If your model requires manual mode and you forget to start it, no sleep will be recorded.
Charge your Fitbit to at least 5 percent battery
When your Fitbit's battery drops below 5 percent, the device disables non-essential features to preserve power, including sleep tracking. If your battery is critically low, you'll see a low-battery warning on the device screen or in the app.
Plug your Fitbit into its charging cable and charge it for at least 30 minutes. Most Fitbit models take one to two hours to fully charge. Once the battery reaches 5 percent or higher, sleep tracking will resume automatically. You don't need to do anything else—just wear it to bed that night and the data should record.
Force-close the app and restart your device
Sometimes the Fitbit app gets stuck and stops syncing sleep data even though the device is recording it. A force-close and restart usually fixes this.
On iPhone, swipe up from the bottom of the screen to open the app switcher, find the Fitbit app, and swipe it up to close it. On Android, go to Settings, tap Apps, find Fitbit, and tap "Force Stop." Wait 10 seconds, then reopen the app. Your Fitbit should sync automatically within a few seconds.
If sleep data still doesn't appear, restart your Fitbit itself. The method depends on your model. For most devices, hold the button on the side for 10 to 15 seconds until you see the Fitbit logo on the screen. For Fitbit Sense or Versa models, swipe down from the top, tap Settings, scroll to About, and tap Restart. After the device restarts, open the app again and check whether sleep data syncs.
Check for app and device software updates
Outdated software on either your phone or your Fitbit can prevent sleep tracking from working. Updates often fix bugs that interfere with data recording and syncing.
Open the Fitbit app and tap your profile picture. Select your device. If an update is available, you'll see a prompt to install it. Tap the update button and let it finish—don't close the app or turn off your Fitbit while it's updating. This usually takes two to five minutes.
Also check your phone's app store. Open the App Store (iPhone) or Google Play (Android), search for Fitbit, and see if an update is available. Install it if one is listed. After both your phone and device are updated, wear your Fitbit to bed and check for sleep data in the morning.
Unpair and re-pair your device if nothing else works
If you've tried all the steps above and your Fitbit still isn't tracking sleep, the device may have a deeper sync problem. Unpairing and re-pairing it usually resolves this.
Open the Fitbit app and tap your profile picture. Select your device. Scroll to the bottom and tap "Remove This Device" or "Unpair." Confirm the removal. Then turn off your Fitbit and your phone's Bluetooth. Wait 30 seconds, turn Bluetooth back on, and open the Fitbit app. Tap the plus icon to add a new device and follow the pairing steps. Once your Fitbit is paired again, wear it to bed that night and check whether sleep data appears.
Frequently Asked Questions
Why does my Fitbit show sleep data but it says I was awake most of the night?
Fitbit measures sleep by detecting heart rate changes and movement. If you toss and turn a lot, have restless leg syndrome, or have an irregular heartbeat, the device may misclassify periods of light sleep as awake time. This is normal and doesn't mean the tracker is broken. If the data seems wildly off, try wearing the band tighter or moving it slightly higher on your wrist.
My Fitbit tracked sleep last week but stopped this week. What changed?
The most likely cause is that the band has loosened or slipped down your wrist. Check the fit first. If that's not it, your battery may have dropped low, or sleep tracking may have been accidentally disabled in the app. Go through the checks in order: fit, battery level, and app settings.
Does my Fitbit need to be in airplane mode or do anything special before bed?
No. Your Fitbit should stay in normal mode and stay connected to Bluetooth. Airplane mode actually prevents the device from syncing sleep data to your phone. Just wear it snugly and go to sleep—the device handles everything automatically.
Can I wear my Fitbit over a long-sleeve shirt and still track sleep?
No. The sensors need direct skin contact to measure your heart rate and movement. Wearing it over clothing will prevent sleep tracking from working. Wear it directly on your wrist skin, even if it means pushing your sleeve up slightly.
How long does it take for sleep data to show up in the app?
Sleep data usually syncs to the app within a few minutes of waking up, as long as your Fitbit and phone are close to each other and Bluetooth is on. If it doesn't appear within 15 minutes, try force-closing and reopening the app. If it still doesn't show after an hour, restart your device.