Your Fitbit loses connection when Bluetooth is off, the app needs an update, or the device needs to forget and re-pair with your phone

A Fitbit that won't connect to your phone usually means one of three things: Bluetooth is disabled on your phone, the Fitbit app is outdated, or the pairing between the devices has become corrupted. The fix depends on which one is the problem, but most people solve it in under five minutes by checking these three things in order.

The connection works through Bluetooth, the same wireless standard your phone uses for headphones and car speakers. If Bluetooth is off, nothing connects. If the app hasn't been updated in a while, it may not speak the same language as your Fitbit's firmware. And if the pairing gets stuck—usually after a failed update or a phone restart—you have to unpair and start over.

Key Takeaways

  • Turn on Bluetooth in your phone's settings and make sure it stays on; Fitbit needs it running in the background at all times.
  • Open the app store on your phone and check for a pending update to the official Fitbit app, because outdated versions often lose connection.
  • If Bluetooth and updates don't work, unpair the Fitbit from your phone's Bluetooth settings, then open the Fitbit app and pair again from scratch.
  • Keep your phone and Fitbit within 30 feet of each other during pairing, and make sure no other devices are trying to connect at the same time.

Check that Bluetooth is on and stays on

Bluetooth must be enabled on your phone for any connection to happen. On an iPhone, swipe down from the top right corner to open Control Center, then tap the Bluetooth icon to turn it on. On Android, swipe down twice from the top to open Quick Settings, then tap Bluetooth.

After you turn it on, leave it on. Some phones automatically turn Bluetooth off after a few minutes of inactivity, or when you restart the phone. Check your phone's settings to see if Bluetooth is set to turn off automatically. On iPhone, go to Settings > Bluetooth and look for any auto-off options. On Android, go to Settings > Connected Devices > Bluetooth and check for power-saving features that might disable it.

Once Bluetooth is on, open the Fitbit app and wait 30 seconds. The app should show your device as connected. If it still shows disconnected, move to the next step.

Update the Fitbit app to the latest version

The Fitbit app needs to match your device's firmware version to communicate properly. If the app hasn't been updated in weeks or months, the connection often fails. Open the app store on your phone—the App Store on iPhone or Google Play on Android—and search for "Fitbit".

If an Update button appears next to the Fitbit app, tap it and wait for the update to finish. Do not force-close the app or turn off your phone while it updates. After the update completes, open the Fitbit app again and wait 30 seconds to see if your device connects.

If no update button appears, your app is already current. In that case, the problem is likely a corrupted pairing, which you fix by unpairing and re-pairing.

Unpair and re-pair your Fitbit from scratch

When the pairing between your phone and Fitbit gets stuck, the devices can see each other but won't communicate. The fix is to erase the pairing on both sides and start fresh. Start in your phone's Bluetooth settings, not the Fitbit app.

On iPhone, go to Settings > Bluetooth, find your Fitbit in the list of paired devices, tap the info icon next to it, and tap Forget This Device. On Android, go to Settings > Connected Devices > Bluetooth, find your Fitbit, tap the settings icon next to it, and tap Unpair or Forget.

Now open the Fitbit app. It will ask you to set up your device again. Follow the on-screen steps, which usually involve entering your Fitbit account password and letting the app search for your device. Keep your phone and Fitbit within 10 feet of each other during this process. When the app finds your device, it will ask permission to pair—tap yes. The connection should now work.

Restart your phone and Fitbit if pairing still fails

If re-pairing doesn't work, a restart often clears out stuck processes on both devices. Turn off your phone completely, wait 10 seconds, and turn it back on. While your phone restarts, restart your Fitbit by holding the button on the side or back for 10 to 15 seconds until you see the Fitbit logo appear on the screen.

After both devices have restarted, turn Bluetooth back on, open the Fitbit app, and try to pair again using the steps above. Most connection problems are solved by this point.

Check that your Fitbit model is compatible with your phone

Older Fitbit models sometimes lose compatibility with newer phone operating systems. If your Fitbit is more than five years old and your phone recently updated to a new version of iOS or Android, the two may no longer work together. Check the Fitbit website or your device's manual to see the minimum phone operating system required.

If your phone is newer than your Fitbit's requirements, you may need to use an older phone to sync, or consider upgrading your Fitbit. If your phone is older than the requirements, updating your phone's operating system (if available) may restore the connection.

Move closer to your Fitbit and reduce wireless interference

Bluetooth has a range of about 30 feet in open space, but walls, metal, and other wireless devices can block the signal. If your Fitbit is in another room or your phone is far away, move them closer together. Keep your phone and Fitbit within 10 feet during pairing, and within 30 feet during normal use.

Wireless interference from Wi-Fi routers, microwaves, and other Bluetooth devices can also weaken the connection. If you have multiple Bluetooth devices trying to connect at the same time—headphones, smartwatch, car system—turn off the others while you pair your Fitbit. Once pairing is complete, you can turn them back on.

When to contact Fitbit support

If you have worked through all the steps above and your Fitbit still won't connect, the device itself may have a hardware problem. Contact Fitbit support through their website or the help section in the app. Have your device model number, phone model, and operating system version ready when you reach out.

Fitbit support can walk you through additional troubleshooting steps specific to your device model, and can arrange a replacement if the hardware is faulty. Most Fitbits are covered by a one-year warranty from the date of purchase.

Frequently Asked Questions

Why does my Fitbit connect sometimes but not other times?

Intermittent connection usually means Bluetooth is turning off automatically on your phone, or your Fitbit is moving out of range. Check your phone's battery saver or power-saving settings—these often disable Bluetooth to save power. If that's not it, make sure your Fitbit is within 30 feet of your phone and that no major obstacles are between them.

Do I lose my data if I unpair my Fitbit?

No. Your activity data is stored on Fitbit's servers and linked to your account, not to the pairing itself. When you unpair and re-pair, your data stays intact. The Fitbit app will sync all your stored data once the connection is re-established.

Can I connect my Fitbit to more than one phone?

Yes, but only one phone at a time. If you want to switch to a different phone, unpair from the old phone first, then pair with the new one. If you try to pair a second phone without unpairing the first, the connection will fail.

What if my Fitbit won't turn on at all?

If your Fitbit won't power on, the battery may be completely drained. Plug it into the charging cable that came with it and leave it charging for at least two hours. If it still won't turn on after a full charge, contact Fitbit support—the device may have a hardware fault.

Does my Fitbit need to be near my phone all the time?

No. Once paired, your Fitbit stores activity data on the device itself. It only needs to be near your phone to sync that data to the app, which usually happens automatically once a day. You can wear your Fitbit all day without your phone nearby.