The fastest ways to improve battery life right now
Your laptop battery drains fastest when the screen is bright, the processor is working hard, and background programs are running. You can add hours to a single charge by lowering screen brightness, closing unused applications, and switching to battery saver mode. These changes take seconds and work on any laptop.
Start with brightness: reduce it to the lowest level you can comfortably read. Then open your task manager (Windows) or Activity Monitor (Mac) and close any program you are not actively using—web browsers with many tabs, cloud sync services, and video chat applications consume the most power. Finally, enable battery saver mode in your system settings; this throttles processor speed and reduces background activity without affecting everyday tasks like email or word processing.
Key Takeaways
- Lowering screen brightness to 40 percent or less and closing unused applications will extend battery life by one to three hours on most laptops.
- Battery saver mode reduces processor speed and background activity; enable it whenever you are away from a power outlet.
- Older batteries lose capacity over time, and you can check your battery's health through built-in diagnostic tools on Windows and Mac.
- Overheating shortens battery lifespan, so keep vents clear and use your laptop on a hard, flat surface rather than on a bed or pillow.
- If your battery no longer holds a charge for more than an hour, replacement is usually cheaper than repair and takes less than an hour at most repair shops.
How to adjust display settings for maximum battery savings
The screen is the single largest drain on laptop battery. Reducing brightness from 100 percent to 40 percent typically adds one to two hours of runtime. On Windows, use the brightness slider in the Quick Settings menu (swipe from the right edge of the screen or press Windows key + A). On Mac, click the Control Center icon in the top right and drag the brightness slider down.
If your laptop has an OLED or high-refresh-rate display, you can save additional battery by lowering the refresh rate. Windows laptops: go to Settings > System > Display > Advanced Display Settings and change the refresh rate from 144Hz or 120Hz down to 60Hz. Mac users cannot adjust refresh rate in software, but closing unnecessary browser tabs and reducing video playback quality has a similar effect.
Enable dark mode in your operating system and applications. On dark backgrounds, pixels use less power—this is especially true on OLED screens. Windows: Settings > Personalization > Colors > Dark. Mac: System Settings > Appearance > Dark.
Closing background programs and managing startup applications
Programs running in the background consume processor power and keep your hard drive active, both of which drain the battery. Open Task Manager (Windows: Ctrl + Shift + Esc) or Activity Monitor (Mac: Command + Space, type "Activity Monitor"). Look for programs using high CPU or memory that you are not currently using—Spotify, Slack, OneDrive, Dropbox, and web browsers with many tabs are common culprits.
Close these programs by selecting them and clicking "End Task" (Windows) or the X button (Mac). Do not close system processes or anything you do not recognize. If a program restarts every time you boot your laptop, disable it from startup: Windows users go to Settings > Apps > Startup and toggle off programs you do not need when ready when the laptop starts. Mac users: System Settings > General > Login Items, then remove programs from the list.
Disable notifications from applications that do not require them. Notifications force the processor to wake and the screen to light up. Windows: Settings > System > Notifications. Mac: System Settings > Notifications. Turn off notifications for email, social media, and messaging apps while on battery power.
Using battery saver mode and power plans
Battery saver mode reduces processor speed, dims the screen slightly, and stops background syncing. On Windows 11, swipe from the right or press Windows + A, then click the battery icon and select "Best battery life." On Windows 10, go to Settings > System > Battery Saver and toggle it on. On Mac, go to System Settings > Battery and select "Low Power Mode."
Windows users can also create a custom power plan for maximum battery life. Go to Settings > System > Power & Battery > Power Plans (or search "power plan" in the Start menu). Select "Power Saver" or create a custom plan that reduces processor speed to 50 percent and lowers screen brightness automatically after two minutes of inactivity. This is more aggressive than battery saver mode but can extend runtime by another 30 minutes to an hour on older laptops.
Battery saver mode does slow down performance—video editing, gaming, and large file transfers will take longer. Disable it when you are plugged in or when you need full speed, then re-enable it when you unplug.
Checking and maintaining your battery's health
Laptop batteries degrade over time and lose capacity after 300 to 500 charge cycles (a full discharge and recharge counts as one cycle). You can check your battery's current health on Windows by opening Command Prompt as administrator and typing powercfg /batteryreport. This creates an HTML file showing the battery's design capacity, current capacity, and cycle count. If current capacity is below 80 percent of design capacity, the battery is aging normally. Below 60 percent means replacement is worth considering.
Mac users can check battery health by holding Option and clicking the battery icon in the top right menu bar. Look for the "Condition" field. If it says "Normal," your battery is fine. If it says "Replace Soon" or "Replace Now," the battery is degraded and should be replaced within weeks or days.
To extend battery lifespan, avoid letting the battery fully drain regularly. Lithium batteries last longer when kept between 20 and 80 percent charge. If you use your laptop plugged in most of the time, enable "Battery Limit" (Windows) or "Optimized Battery Charging" (Mac) in your power settings; these features stop charging at 80 percent to reduce wear.
Keeping your laptop cool to prevent battery damage
Heat degrades battery capacity faster than anything else. A battery that overheats regularly will lose 10 to 15 percent of its capacity per year, compared to 2 to 3 percent under normal conditions. Keep your laptop's vents clear by cleaning them with compressed air every three months. Do not block vents with blankets, pillows, or your lap—use a laptop stand or hard desk surface instead.
If your laptop runs hot, check what is causing it. Open Task Manager or Activity Monitor and look for processes using high CPU. Malware, outdated drivers, and failing hard drives are common causes. Update your operating system and drivers through Windows Update (Windows) or Software Update (Mac). If a specific program consistently uses high CPU, uninstall it or contact the developer for support.
Dust buildup inside the laptop also traps heat. If your laptop is more than two years old and runs hot even when idle, have a technician clean the internal fans and heatsinks. This costs $30 to $60 and can restore battery life by 20 to 30 percent.
When to replace your battery
If your laptop no longer holds a charge for more than one hour even after following all the steps above, the battery is likely at the end of its lifespan and should be replaced. Replacement costs vary: budget laptops run $40 to $80, mid-range laptops $80 to $150, and high-end models $150 to $300. Most repair shops can replace a battery in 30 minutes to an hour.
You can replace the battery yourself on some laptops—search "[your laptop model] battery replacement" to see if the battery is user-accessible. Many modern laptops, especially thin ultrabooks and MacBooks, require disassembly by a technician. If your laptop is still under warranty, contact the manufacturer; battery replacement is often covered if capacity has dropped below 80 percent.
Do not attempt to repair a swollen battery—this is a fire hazard. If your battery is visibly bulging or your laptop feels hot near the battery area, power it off when ready, unplug it, and take it to a repair shop or manufacturer service center.
Frequently Asked Questions
Does closing the lid put my laptop to sleep and save battery?
Yes. Closing the lid puts the laptop into sleep mode, which uses 1 to 2 percent of battery per hour—far less than running normally. However, some laptops are set to hibernate (a deeper sleep that uses almost no power) or to do nothing when the lid closes. Check your power settings: Windows users go to Settings > System > Power & Battery > When I close the lid. Mac users go to System Settings > Battery and check the "Turn display off after" setting.
Will using an external mouse and keyboard improve battery life?
Slightly. The trackpad and keyboard use minimal power, but a wireless mouse or keyboard that is always searching for a connection can drain battery faster than a wired one. If you use an external mouse, choose a wired USB model or a wireless model with an on/off switch that you can turn off when unplugged. The battery savings are usually less than 10 minutes per charge.
Is it bad to leave my laptop plugged in all the time?
Modern laptops have built-in protections that stop charging at 100 percent, so leaving it plugged in does not when ready damage the battery. However, keeping the battery at 100 percent constantly does accelerate aging. If you use your laptop plugged in most of the time, enable "Optimized Battery Charging" (Mac) or "Battery Limit" (Windows) to cap charging at 80 percent and extend battery lifespan by one to two years.
Can malware cause my battery to drain faster?
Yes. Malware often runs hidden processes that consume CPU power. If your battery life suddenly drops without any change in your usage, run a full scan with Windows Defender (Windows) or Malwarebytes. Check Task Manager or Activity Monitor for unfamiliar processes using high CPU. If you find something suspicious and cannot identify it, search the process name online or take your laptop to a technician.
Does turning off Bluetooth and Wi-Fi really save battery?
Turning off Wi-Fi saves more battery than Bluetooth—Wi-Fi uses 2 to 3 times more power because it is constantly searching for networks. Bluetooth uses minimal power unless actively connected to a device. If you are not using the internet, turning off Wi-Fi can add 30 minutes to an hour of runtime. Bluetooth can stay on with minimal impact.