The quickest way to reset your Arris modem

A reset clears your modem's memory and forces it to reconnect to your internet service provider. Most Arris modems have a small reset button on the back panel. Press and hold that button for 10 to 15 seconds while the modem is powered on, then release it. The lights on the front will blink as the modem restarts—this takes about two to three minutes. Once the online light stops blinking and stays solid, your modem is back online.

If you cannot find the reset button or prefer not to use it, you can also unplug the modem's power cable, wait 30 seconds, and plug it back in. This soft reset accomplishes the same thing without pressing any buttons. Either method will restore your modem to factory settings and clear any temporary connection problems.

Key Takeaways

  • The reset button on the back of your Arris modem must be held for 10 to 15 seconds while powered on to trigger a full reset.
  • Unplugging the modem for 30 seconds and plugging it back in works just as well as pressing the reset button.
  • After a reset, your modem will take two to three minutes to reconnect and show a solid online light.
  • A reset clears temporary connection problems but does not change your internet plan or account information with your provider.

What happens when you reset your Arris modem

Resetting your modem erases all stored settings and returns it to the state it was in when it left the factory. This includes any custom network names, passwords, or configuration changes you made. Your modem will then go through its startup sequence again, which includes contacting your internet service provider to re-register itself on the network.

The reset does not affect your internet service itself or your account with your provider. Your service will remain active, and you will not lose any billing information or service history. The modem straightforward forgets its local settings and has to relearn them from your provider's network.

When to reset your Arris modem

Reset your modem when you are experiencing slow speeds, dropped connections, or pages that will not load, and a straightforward power cycle has not fixed the problem. A reset is also useful if you have forgotten the password to your modem's admin panel or if you are preparing to sell or give away the modem to someone else.

Do not reset your modem if you are in the middle of troubleshooting with your internet provider's support team, as it may erase diagnostic information they need to see. If you are on a support call, ask the technician whether a reset is the right next step before you do it.

Finding the reset button on your Arris modem

The reset button on an Arris modem is typically a small, recessed button on the back panel, often labeled "Reset" or sometimes just marked with a circular indent. Because it is recessed, you will need a straightened paperclip, a ballpoint pen, or a similar thin object to press it. The button is deliberately hard to reach so you do not reset the modem by accident.

If you cannot locate the button on your specific model, check the label on the bottom or back of the modem for the model number, then search online for "[your model number] reset button location." Different Arris models place the button in slightly different spots, but all of them have one.

What to do if your modem will not come back online after a reset

After a reset, your modem should show a solid online light within two to three minutes. If the online light remains off or keeps blinking after five minutes, unplug the modem, wait another 30 seconds, and plug it back in. Sometimes the initial reset does not complete cleanly, and a second power cycle will finish the job.

If the modem still does not come online after a second attempt, check that the coaxial cable (the thick cable that carries your internet signal) is firmly connected to the port labeled "Cable In" on the back of the modem. A loose connection is the most common reason a modem will not reconnect after a reset. If the cable is find and the modem still will not come online, contact your internet provider's support line—there may be an issue on their network side that is preventing the modem from registering.

Resetting versus restarting your Arris modem

A restart (or power cycle) straightforward turns the modem off and back on without erasing any settings. A reset erases all settings and returns the modem to factory defaults. For most connection problems, a restart is the first thing to try because it fixes temporary glitches without forcing you to reconfigure anything.

To restart, unplug the modem for 10 seconds and plug it back in. To reset, hold the reset button for 10 to 15 seconds or unplug it for 30 seconds. If a restart does not solve your problem after waiting a few minutes, then move on to a reset.

Frequently Asked Questions

Will resetting my modem delete my WiFi password?

Yes. A reset returns your modem to factory settings, which means the WiFi network name and password will revert to the defaults printed on a label on the modem itself. You will need to reconnect your devices using those default credentials, then you can change the WiFi name and password to something you prefer through your modem's admin panel.

How do I get back into my modem after a reset?

Open a web browser and type 192.168.0.1 or 192.168.100.1 into the address bar. You will be prompted for a username and password. For Arris modems, the default username is often "admin" and the default password is printed on the label on the back of the modem. Once you log in, you can reconfigure your WiFi settings.

Can I reset my modem while it is still plugged in?

Yes. You can press and hold the reset button while the modem is powered on and plugged in. You do not need to unplug it first. The button press will trigger the reset, and the modem will restart automatically.

How long does it take for an Arris modem to fully reset?

The reset itself takes about 10 to 15 seconds of button holding. After you release the button, the modem will restart and reconnect to your provider's network, which usually takes two to three minutes. You will see the lights on the front blink during this time, and the online light will go solid once the connection is complete.