The quickest way to reset your Comcast modem
A reset clears your modem's memory and forces it to reconnect to Comcast's network from scratch. The fastest method is the soft reset: unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. The lights will blink as it restarts—this usually takes two to three minutes. Once the online light stops blinking and stays solid, your internet should work again.
If a soft reset does not fix your problem, you can perform a factory reset by holding the reset button on the back of the modem for 10 to 15 seconds while it is powered on. This erases all settings and returns the modem to factory defaults. You will need to contact Comcast or use their self-service tool to reactivate the modem with your account afterward—it will not reconnect on its own.
The difference matters: a soft reset keeps your settings and usually solves connection drops or slow speeds. A factory reset is only necessary if you are returning the modem, selling it, or Comcast support tells you to perform one.
Key Takeaways
- A soft reset (unplug for 30 seconds, plug back in) fixes most connection problems and takes two to three minutes to complete.
- A factory reset (hold the reset button for 10 to 15 seconds) erases all settings and requires you to reactivate the modem with Comcast afterward.
- The online light should be solid green or blue when the modem is working; blinking means it is still connecting.
- If your modem still will not connect after a soft reset, restart your router separately and wait another two minutes before calling Comcast.
When to soft reset versus factory reset
Use a soft reset when your internet cuts out, pages load slowly, or you cannot connect to Wi-Fi even though the modem appears to be on. These are usually temporary glitches that a restart clears. Soft resets are safe to perform anytime and do not change any of your settings.
Use a factory reset only when Comcast support specifically instructs you to, or when you are decommissioning the modem. A factory reset erases the modem's configuration, and you cannot use it again without contacting Comcast to reactivate it. If you are troubleshooting on your own, always try a soft reset first.
What the lights mean during and after a reset
When you first unplug the modem, all lights go dark. When you plug it back in, the lights will flash in sequence—this is normal. The online light (usually labeled "Online," "Internet," or shown as a globe icon) will blink amber or red while the modem is connecting. Once it turns solid green or blue, the modem has reconnected to Comcast's network.
The power light should be solid green or blue at all times when the modem is plugged in. If it stays red or does not light up at all, the modem may not be receiving power—check that the cable is fully inserted into both the modem and the outlet.
The downstream and upstream lights (or "DS" and "US") indicate data flow. They may blink during a reset and should settle into a steady state once the modem is fully online. If these lights remain off after five minutes, the modem may not be receiving a signal from Comcast's network.
Restarting your router after resetting the modem
If you have a separate router (a different device from the modem), restart it after the modem comes back online. Unplug the router's power cable, wait 30 seconds, and plug it back in. This forces the router to reconnect to the modem and can resolve Wi-Fi problems that a modem reset alone does not fix.
Wait for the modem to be fully online (solid online light) before restarting the router. If you restart them at the same time, they may have trouble finding each other. Give the router another two to three minutes to boot up and broadcast Wi-Fi before testing your connection.
When to contact Comcast instead of resetting
If the online light remains red or does not light up at all after a soft reset, the problem is likely on Comcast's end or with the cable connection itself. Check that the coaxial cable (the thick cable that screws into the modem) is hand-tight at both ends—one end goes into the modem, the other into the wall outlet or splitter. If it is loose, tighten it and wait two minutes for the modem to reconnect.
If the cable is tight and the online light still will not turn green, contact Comcast. They can check whether your account is active, whether there is an outage in your area, and whether the modem is registered to your account. Do not perform a factory reset unless they ask you to—it will make troubleshooting harder.
If your internet works but is much slower than usual, a soft reset is worth trying, but slow speeds often point to network congestion or a problem with your service plan rather than the modem itself. Comcast support can run a line test to see whether the modem is receiving a strong signal.
Reactivating your modem after a factory reset
After a factory reset, the modem will not reconnect on its own. You will see the online light stay off or blink red. To reactivate it, visit Comcast's self-service set up page or call Comcast at the number on your bill. Have your account number and the modem's MAC address ready—the MAC address is printed on a label on the back of the modem and usually starts with "00:0A" or similar.
The reactivation process usually takes 5 to 10 minutes. Once Comcast confirms the modem in their system, the online light should turn green within a few minutes. If it does not, perform a soft reset (unplug and plug back in) to force the modem to check for the updated settings.
Frequently Asked Questions
How long should I wait after unplugging the modem?
Wait at least 30 seconds. This gives the modem time to fully discharge and clear its memory. Waiting a full minute is fine and does not hurt. After you plug it back in, the modem needs two to three minutes to fully restart and reconnect to Comcast's network.
Will a reset erase my Wi-Fi password?
A soft reset will not erase your Wi-Fi password or any settings. A factory reset will erase everything and reset the Wi-Fi name and password to the defaults printed on the modem's label. If you only need to fix your internet connection, use a soft reset.
What if the reset button is hard to find?
The reset button is usually a small, recessed button on the back of the modem, often labeled "Reset" or "Restart." You may need a paperclip or pen tip to press it. If you cannot locate it, check the modem's manual or search the model number online. For a soft reset, you do not need the button—just unplug the power cable.
Can I reset the modem while someone is using the internet?
You can, but they will lose their connection during the restart. A soft reset takes two to three minutes, so anyone streaming, downloading, or on a video call will be interrupted. It is best to reset during a time when no one is using the internet, or let people know beforehand.
Do I need to reset the modem if Comcast is having an outage?
No. If Comcast is experiencing an outage in your area, resetting the modem will not restore your service. You can check Comcast's outage map on their website or call their support line to confirm. Once the outage is resolved, your modem should reconnect on its own.