The fastest way to reset your modem

A modem reset clears its memory and forces it to reconnect to your internet service provider. Most resets take less than five minutes and fix connection drops, slow speeds, and devices that won't connect. You have two options: a soft reset (power cycle) that takes 30 seconds, or a hard reset that erases all settings and takes about ten minutes.

Start with a soft reset first — it solves most problems without losing anything. If that doesn't work, move to a hard reset. A hard reset is only necessary if your modem is stuck in a loop, won't respond to commands, or you're selling or returning it.

Key Takeaways

  • A soft reset means unplugging the modem for 30 seconds, then plugging it back in — this fixes most connection problems.
  • A hard reset erases all your modem's settings and requires holding the reset button for 10 to 15 seconds, then waiting for the lights to cycle.
  • After any reset, wait for the lights to stabilize (usually two to three minutes) before testing your connection.
  • Write down your modem's model number before a hard reset so you can look up the default login if you need to change settings later.

Soft reset: power cycle your modem

Unplug the power cable from the back of your modem. Wait 30 seconds — this drains the modem's memory completely. Plug the power cable back in and wait for the lights to stop blinking and settle into a steady pattern. This usually takes two to three minutes.

Once the lights are stable, test your connection by opening a web browser or checking if your devices reconnect. If your internet is working, you're done. If the problem persists, move to a hard reset.

Hard reset: restore factory settings

Locate the small reset button on the back or bottom of your modem — it's usually recessed so you can't press it by accident. You'll need a straightened paperclip or a ballpoint pen to reach it. Do not use your finger.

While the modem is powered on, press and hold the reset button for 10 to 15 seconds. You'll see the lights flash or turn off. Release the button and wait for the modem to restart — this takes about five minutes. The lights will cycle through different colors and patterns before settling into a steady state.

A hard reset erases your modem's configuration, so if you've changed any settings (like your WiFi password or network name), you'll lose those changes. The modem will revert to the factory defaults, which are usually printed on a sticker on the device itself or in the manual.

What happens after a reset

After a soft reset, your modem keeps all its settings and reconnects to your ISP using the same configuration. You should see internet return within a few minutes.

After a hard reset, your modem loses all custom settings and returns to defaults. If your ISP provisioned your modem (meaning they set it up for you), you may need to call them to re-provision it. Some modems re-provision automatically within 15 minutes; others require a technician call. Check your ISP's website or call their support line to find out which applies to yours.

When to reset versus when to call your ISP

Reset your modem if you're experiencing slow speeds, devices dropping off the network, or the modem not responding to commands. A reset also helps if you've forgotten your WiFi password or can't log into the modem's settings page.

Call your ISP instead if the modem lights don't turn on after a reset, if you hear unusual noises from the device, or if the problem started after a power outage or storm. These signs point to hardware failure rather than a software glitch. Also call if you've done a hard reset and the modem won't reconnect to the internet after 20 minutes — your ISP may need to re-provision the device remotely.

Protecting your settings before a hard reset

If you've customized your modem's settings (changed the WiFi name, set up port forwarding, or adjusted security settings), write them down before you reset. Most modems don't back up these settings, so a hard reset will erase them permanently.

Log into your modem's settings page (usually by typing 192.168.0.1 or 192.168.100.1 into a web browser) and take screenshots of any custom configurations. After the reset, you can log back in with the factory defaults and re-enter your changes.

Frequently Asked Questions

Will resetting my modem delete my internet history or files?

No. Your modem only stores network settings, not your browsing history or personal files. Those live on your computer or phone. A reset affects only the modem's configuration.

How often should I reset my modem?

You shouldn't need to reset regularly. If you're resetting more than once a month, the modem may be failing or your ISP may have a service issue. Contact your ISP to investigate the root cause instead of resetting repeatedly.

What's the difference between resetting the modem and resetting the router?

A modem connects you to your ISP's network. A router distributes that connection to your devices wirelessly. They're separate devices. Resetting the modem fixes ISP connection problems; resetting the router fixes WiFi problems. If you have a combo unit, resetting it affects both functions.

Do I need to unplug other cables before resetting?

No. Leave the coaxial cable (from the wall) and ethernet cables connected. Only unplug the power cable for a soft reset. For a hard reset, you can leave everything plugged in and just hold the reset button.

Why are the lights blinking after I reset?

Blinking lights mean the modem is starting up and connecting to your ISP. This is normal and usually takes two to three minutes. Once the lights settle into a steady pattern (usually solid or slow-blinking), your connection is ready to use.