How to log into your Comcast router
Your Comcast router has a built-in control panel you reach through any web browser on a device connected to your network. Open a browser, type 192.168.0.1 or 192.168.100.1 into the address bar, and press Enter. The router will ask for a username and password.
The default username is admin and the default password is motorola (or sometimes comcast, depending on your router model). If neither works, check the sticker on the back or bottom of your router — Comcast prints the login details there. If you changed the password before and cannot remember it, you can reset the router to factory defaults by holding the reset button on the back for 10 to 15 seconds, which will restore the default credentials.
Once you log in, you will see a dashboard with options to change your WiFi name, password, connected devices, and other network settings. The exact layout depends on your router model, but the main settings are usually on the first page or under a "Wireless" or "WiFi" tab.
Key Takeaways
- Access your Comcast router by typing 192.168.0.1 or 192.168.100.1 into a web browser on any device connected to your WiFi.
- The default username is admin and the default password is motorola or comcast, printed on a sticker on the router itself.
- You can change your WiFi password, network name, and see which devices are connected from the router dashboard.
- If you forget your password, hold the reset button for 10 to 15 seconds to restore factory defaults and use the original login credentials.
Changing your WiFi password from the router panel
After you log in, look for a section labeled "Wireless," "WiFi," or "Network Settings." Click on it and you will see fields for your network name (SSID) and password. The password field may show dots or asterisks instead of the actual characters for security.
To change your password, clear the existing password field and type a new one. Comcast recommends using at least 12 characters with a mix of uppercase, lowercase, numbers, and symbols — this makes it harder for someone to guess. Write down your new password somewhere safe before you save the changes, because you will need it to reconnect your devices.
Click "Save" or "explore" (the button name varies by model). The router will restart, which usually takes one to three minutes. During this time, your internet will drop briefly. Once it comes back online, your old password will no longer work — you will need to reconnect each device using the new password.
Finding your WiFi name and password if you do not remember them
If you never changed your WiFi password from the factory default, it is printed on the sticker on your router. The sticker shows the network name (SSID) and the password you need to connect devices. This default password is usually a long string of letters and numbers.
If you changed the password and forgot it, you have two options. The first is to log into the router panel at 192.168.0.1 or 192.168.100.1 and look at the wireless settings — the password field will show your current password (though it may be masked). The second is to reset the router to factory defaults by holding the reset button for 10 to 15 seconds, which will restore the original password on the sticker.
Connecting devices to your Comcast WiFi after a password change
Once you change your WiFi password, any device currently connected will lose internet access. You will need to reconnect each one manually. On a phone or laptop, open your WiFi settings, find your network name in the list of available networks, and select it.
When prompted for the password, type the new password exactly as you set it in the router panel. Passwords are case-sensitive, so uppercase and lowercase letters matter. If a device says the password is incorrect, double-check that you typed it right — common mistakes include confusing the letter O with the number 0, or the letter l with the number 1.
Devices like smart speakers, security cameras, and printers may not reconnect automatically. You may need to remove them from your WiFi network in their settings and add them again with the new password. Check the device manual or manufacturer website if you are unsure how to do this.
What to do if you cannot reach the router panel
If typing 192.168.0.1 does not open the router panel, first check that your device is actually connected to your Comcast WiFi network — not a different network or a mobile hotspot. On Windows, open Settings and look under "Network & Internet" to confirm. On Mac, click the WiFi icon in the top right corner and check which network is connected.
If you are connected to the right network and the address still does not work, try 192.168.100.1 instead. Some Comcast router models use one address and some use the other. If neither works, restart your router by unplugging it for 30 seconds, plugging it back in, and waiting two minutes for it to fully boot up. Then try the address again.
If you still cannot reach the panel, your router may have a problem. Try connecting a different device — a phone, tablet, or different computer — to see if the issue is with one device or the router itself. If no device can reach the panel, contact Comcast support to troubleshoot or request a replacement router.
Understanding the main settings in your router panel
The router dashboard shows several key sections. The "Wireless" or "WiFi" tab is where you change your network name and password. The "Connected Devices" or "Device List" section shows every phone, computer, camera, and other gadget currently using your network — useful if you want to see what is connected or remove a device.
The "Advanced" or "System" section contains settings most people do not need to change, like DNS servers, port forwarding, and firewall rules. Unless you have a specific reason to adjust these, leave them as they are. The "Restart" or "Reboot" button lets you restart the router from the panel instead of unplugging it — useful if your internet is slow or devices are not connecting properly.
Some Comcast routers also show your internet speed, the number of connected devices, and signal strength. These are informational only and cannot be changed from the panel. If your internet speed is much slower than what you pay for, that is a separate issue to discuss with Comcast support.
Frequently Asked Questions
What is the default password for a Comcast router?
The default password is usually motorola or comcast, depending on your router model. Check the sticker on the back or bottom of the router — it will show the exact default username and password for your device. If you changed the password and forgot it, you can reset the router to factory defaults by holding the reset button for 10 to 15 seconds.
Can I change my WiFi password without resetting the router?
Yes. Log into the router panel at 192.168.0.1 or 192.168.100.1, go to the Wireless or WiFi section, and type a new password into the password field. Click Save or explore, and the router will restart with the new password active. You do not need to reset the entire router.
Will changing my WiFi password disconnect my devices?
Yes. When you save a new password, the router restarts and your old password stops working. Any device currently connected will lose internet access. You will need to reconnect each device by selecting your WiFi network and entering the new password.
What should I do if I forgot my WiFi password?
Log into the router panel at 192.168.0.1 or 192.168.100.1 using the default admin credentials (check the sticker on the router). Once logged in, go to the Wireless or WiFi section and you can see your current password. If you cannot log into the panel, reset the router by holding the reset button for 10 to 15 seconds, which will restore the default password printed on the sticker.
Why does my device say the password is incorrect?
Passwords are case-sensitive, so check that uppercase and lowercase letters match what you typed in the router panel. Common mistakes include confusing the letter O with zero, or the letter l with one. If you are still stuck, try resetting the router to restore the default password on the sticker and reconnect using that.