Finding Your Router's IP Address and Login Page
To access your Comcast router, you need to open its settings page in a web browser using an IP address. The standard address for most Comcast routers is 192.168.0.1 or 192.168.100.1. Type one of these into your browser's address bar (the same place you'd type a website URL) while connected to your Comcast network—either by WiFi or an ethernet cable plugged directly into the router.
If neither address works, you can find your router's correct IP address by checking your device's network settings. On Windows, open Command Prompt and type ipconfig, then look for "Default Gateway"—that number is your router's IP address. On Mac, go to System Preferences > Network, select your connection, and click Advanced > TCP/IP. The router address appears next to "Router".
Once you've entered the correct IP address, your browser will load a login page. This is where you'll enter your username and password to access the router's control panel.
Key Takeaways
- Most Comcast routers use the IP address 192.168.0.1 or 192.168.100.1 to access settings from any connected device.
- The default username is usually admin and the default password is motorola or comcast, though Comcast may have changed yours during setup.
- If you cannot remember your password, you can reset the router to factory settings by holding the reset button for 10 to 15 seconds, which will restore the default credentials.
- Once logged in, you can change your WiFi network name and password, restart the router, check connected devices, and adjust other network settings.
- Your router's model number and default login information are printed on a sticker attached to the device itself.
Entering Your Username and Password
When the login page appears, you'll see fields for a username and password. The default username for most Comcast routers is admin. The default password is often motorola or comcast, depending on your router model. Both of these are printed on the sticker attached to the back or bottom of your router, along with your WiFi network name and other details.
If you changed your password when you first set up the router, use the password you created instead. If you don't remember it, you'll need to reset the router—see the section below on factory resets.
After entering your credentials, click the Login or Submit button. You should now see your router's main control panel, which displays your network status, connected devices, and settings options.
What to Do If You Forgot Your Password
If you cannot remember the password you set for your router, the only way to regain access is to reset it to factory settings. This erases all your custom settings and returns the router to its default state, so you'll need to set up your WiFi network name and password again afterward.
To reset your Comcast router, locate the small reset button on the back or bottom of the device. Using a paperclip or the tip of a ballpoint pen, press and hold this button for 10 to 15 seconds while the router is powered on. The lights on the front will blink, and the router will restart. Once it finishes restarting (usually within two minutes), the default username and password will work again.
After you log in with the default credentials, change the password when ready to something you'll remember. Write it down in a safe place, or use a password manager to store it.
Common Router Settings You Can Change
Once you're logged into your router, you can adjust several important settings. The most common change is your WiFi network name (SSID) and password. Look for a section labeled "Wireless" or "WiFi Settings" in the control panel. Here you can rename your network to something recognizable and create a stronger password to prevent unauthorized access.
You can also see which devices are currently connected to your network, restart the router without unplugging it, check your internet connection status, and update the router's firmware if a new version is available. Some routers allow you to set up a guest network, adjust WiFi channel settings, or enable parental controls.
Most settings take effect when ready or after a brief restart. If you make a change and your internet stops working, you can always reset the router again and start over.
Troubleshooting Access Problems
If you enter the correct IP address and nothing appears, make sure you're connected to your Comcast network. If you're using WiFi, check that you're connected to the right network name. If you're using an ethernet cable, plug it directly into one of the numbered ports on the router (not the port labeled "Internet" or "WAN").
Try clearing your browser's cache and cookies, or open the router's login page in a different browser. Sometimes an older cached version of the page prevents you from logging in. You can also try restarting your router by unplugging it for 30 seconds, then plugging it back in and waiting for all the lights to stabilize before trying again.
If you still cannot access the login page after these steps, your router may have a hardware problem. Contact Comcast support with your account number and router model number, and they can help diagnose the issue or send you a replacement.
Understanding Your Router Model and Where to Find Information
Comcast provides different router models depending on your service plan and location. Common models include the Motorola MG7550, Arris SB8200, and Technicolor TG3482. The exact model number is printed on a sticker on the back or bottom of your router, along with the default WiFi network name, default password, and MAC address.
If you need to look up specific instructions for your model, search online for "[Your Model Number] manual" or "[Your Model Number] default password." Comcast's support website also has documentation for each router model. Knowing your model number is especially useful if you contact Comcast support, because the representative can walk you through steps specific to your device.
Frequently Asked Questions
Can I access my router from outside my home or on a different WiFi network?
No. The IP address 192.168.0.1 only works when you're connected to your Comcast network. If you're away from home or on a different network, you cannot reach your router's settings page. You must be physically connected to your Comcast WiFi or plugged in with an ethernet cable to access it.
What's the difference between my router and my modem?
Your modem connects to Comcast's network and brings internet into your home. Your router takes that internet connection and broadcasts it as WiFi to your devices. Some Comcast customers have a combined modem-router unit, but they are separate devices with separate login pages. The router's IP address is 192.168.0.1; the modem's is usually different.
Will resetting my router disconnect my devices?
Yes. When you reset the router, all devices lose their connection when ready. After the reset completes and you set up your WiFi network name and password again, your devices will need to reconnect using the new password. This usually takes a few minutes per device.
Is it safe to change settings in the router's control panel?
Most settings are safe to change, especially your WiFi name and password. Avoid changing advanced settings like DNS, IP ranges, or firmware unless you know what you're doing. If you accidentally change something and lose internet, you can always reset the router to factory settings and start over.
Why do I see two WiFi networks with similar names?
Many modern routers broadcast both a 2.4 GHz and a 5 GHz WiFi network. The 5 GHz network is faster but has shorter range; the 2.4 GHz network is slower but reaches farther. You can connect to either one. Some routers let you rename them separately in the settings, or combine them into a single network name that automatically switches between the two.