You can swap out your Comcast modem yourself, but the process depends on whether you own it or rent it from Comcast
If you rent your modem from Comcast (Xfinity), you contact Comcast to request a replacement, and they either mail you a new one or arrange a technician visit. If you own your modem, you buy a compatible replacement, connect it yourself, and register it with Comcast. The key difference is that Comcast controls the timeline and shipping for rentals, while owned modems let you swap them on your schedule.
Before you start, check your bill or log into your Xfinity account to confirm whether you own or rent. A modem you own will not appear as a monthly charge; a rental modem typically shows as "Modem Rental" or "Equipment Rental" on your statement.
Key Takeaways
- Rented modems are replaced through Comcast by phone, online, or in-store; owned modems you replace yourself and then register with Comcast.
- Comcast-compatible modems must be on the approved list, which you can find on the Xfinity website or by calling Comcast support.
- Physical replacement takes minutes if you own the modem; Comcast-shipped replacements typically arrive within 5 to 10 business days.
- After connecting a new modem, you must restart it and wait for the lights to stabilize before testing your internet connection.
- If your modem is still under warranty or contract, returning a rented unit may involve a shipping label or in-store drop-off.
Replacing a Comcast-rented modem
Call Comcast at 1-800-934-6489, visit Xfinity.com, or go to a local Xfinity store to request a replacement. When you call, have your account number ready. Comcast will ask why you want to replace it—common reasons are slow speeds, frequent disconnects, or age—and will confirm your service address.
Comcast will either ship a replacement modem to you at no charge or schedule a technician visit. Shipped modems usually arrive in 5 to 10 business days. When it arrives, you disconnect the old modem, connect the new one to your coaxial cable and power outlet, and wait for the lights to stabilize (usually 2 to 5 minutes). The new modem will automatically register with Comcast's network.
You will need to return the old modem. Comcast typically includes a prepaid shipping label in the box with the new modem. If not, you can drop it off at an Xfinity store or call to arrange a pickup. Failure to return a rented modem may result in a non-return fee, which varies but is often $100 to $150.
Replacing an owned modem with a compatible model
If you own your modem, you can buy a replacement from any retailer. The critical step is choosing one that Comcast supports. Visit Xfinity.com/network-equipment or call 1-800-934-6489 to confirm your modem model is on the approved list. Comcast regularly updates this list, so a modem that worked two years ago may no longer be supported.
Common compatible modems include the Netgear CM500, Netgear CM600, Motorola MG7550, and Motorola MB8600, though availability and compatibility change. The Xfinity website shows the full current list organized by speed tier—make sure your modem supports your service tier (for example, a modem rated for 300 Mbps will not work well if you pay for gigabit service).
Once you have the new modem, power off the old one, disconnect the coaxial cable from the back, and connect it to the new modem. Plug in the new modem's power cable. Wait 2 to 5 minutes for the lights to stop blinking and stabilize—usually a solid white or blue light on the "Online" or "Internet" indicator means it is ready.
Registering your new modem with Comcast
If you own the modem, you must register it with Comcast so the network recognizes it. Log into your Xfinity account at Xfinity.com, go to the "Internet" or "Network" section, and look for an option to add or register equipment. You will need the modem's MAC address, which is printed on a label on the back or bottom of the modem (it looks like six pairs of letters and numbers, such as "00:1A:2B:3C:4D:5E").
Alternatively, call Comcast at 1-800-934-6489 and provide the MAC address over the phone. A representative will register it in your account. Registration usually takes a few minutes, though the modem may take up to an hour to fully set up on the network.
After registration, restart the modem by unplugging it for 30 seconds, plugging it back in, and waiting for the lights to stabilize again. Test your connection by opening a web browser and visiting a website or running a speed test at Speedtest.net.
What to do if your new modem does not connect
If the modem's lights do not stabilize after 5 to 10 minutes, or if you cannot connect to the internet, first check that the coaxial cable is hand-tight at both the wall outlet and the modem. A loose connection is the most common reason for no signal.
Power cycle the modem: unplug it for 30 seconds, plug it back in, and wait another 5 minutes. If the lights still do not show a stable online connection, check the Xfinity website to confirm the modem model is still on the approved list—some older models are occasionally removed from support.
If you own the modem and registered it yourself, verify the MAC address was entered correctly in your account. If you rented the modem from Comcast and it arrived defective, call 1-800-934-6489 to request a replacement. If you own the modem and it fails after a few days, contact the retailer where you bought it to discuss a return or warranty claim.
Returning your old modem to Comcast
If you rented your modem and received a replacement, Comcast will include instructions for returning the old one. Most commonly, you will receive a prepaid shipping label. Place the modem in a box, attach the label, and drop it at any carrier location (USPS, UPS, or FedEx, depending on the label).
Some Xfinity stores also accept modem returns in person. You can find your nearest store and confirm it accepts returns by visiting Xfinity.com/stores or calling 1-800-934-6489. If you do not have a shipping label and cannot visit a store, call Comcast to request one or arrange a pickup.
Keep your tracking number until the modem is confirmed as received. Comcast may take 2 to 4 weeks to process the return and remove any non-return fees from your account. If you are charged a non-return fee and believe you returned the modem, contact Comcast with your tracking information to dispute it.
Frequently Asked Questions
Can I use any modem with Comcast, or does it have to be on their approved list?
It must be on Comcast's approved list. Comcast's network uses specific standards, and modems not on the list may not connect or may cause service issues. Check the current list at Xfinity.com/network-equipment before buying.
Do I have to return my old modem if I own it?
No. If you own the modem, it is yours to keep, sell, or dispose of. You only need to return modems that you rented from Comcast. Once you stop renting, Comcast will remove the rental charge from your bill.
How long does it take for a new modem to work after I connect it?
Physical connection takes a few minutes. The modem's lights should stabilize within 2 to 5 minutes. If you own the modem and need to register it, registration takes a few minutes online or by phone, but full network set up can take up to an hour.
What if Comcast says my modem model is no longer supported?
Comcast occasionally removes older modem models from the approved list. If yours is no longer supported, you will need to buy a newer compatible model. Check the current approved list to see which models are available at your service tier.
Will changing my modem affect my internet speed or service?
A compatible modem should not change your speed—you will get the same speeds you are paying for. If you switch to a modem rated for a lower speed tier, you may see slower speeds. Make sure your new modem supports your service tier.