The fastest way to change your modem password
You change your modem password by logging into its settings page through a web browser, finding the administration or wireless settings section, and entering a new password. The whole process takes about five minutes and requires only the modem's current admin password — the one printed on a sticker on the device itself, unless you changed it before.
Most modems use one of two paths: you either type your modem's IP address (usually 192.168.0.1 or 192.168.100.1) into your browser's address bar, or you visit a branded login page like mynetgear.com or myrouterlogin.com. The exact steps depend on your modem brand, but the principle is the same across all of them.
Key Takeaways
- Log in to your modem's settings page using the IP address or brand-specific web address printed on the device's sticker.
- Use the default admin username and password on the sticker to sign in — change these credentials after you change your Wi-Fi password.
- Look for "Wireless Settings," "Wi-Fi Settings," or "Security" to find where the Wi-Fi password is stored.
- Write down your new password before you save it, because you will need to reconnect all your devices once the change takes effect.
- If you cannot remember the admin password, you can factory reset the modem, but this erases all custom settings and returns it to defaults.
Finding your modem's login page
The first step is reaching your modem's settings page. Look at the sticker on the bottom or back of your modem — it will show either an IP address (like 192.168.0.1) or a web address (like 192.168.1.1 or routerlogin.net). Open a web browser on any device connected to your Wi-Fi and type that address into the address bar, then press Enter.
If the IP address does not work, try the other common defaults: 192.168.1.1, 192.168.100.1, or 10.0.0.1. If you have a branded modem from a specific manufacturer, the sticker may direct you to a branded login page instead — for example, Netgear modems often use mynetgear.com, and TP-Link uses tplinkwifi.net. Type whichever address is on your sticker.
You should see a login screen asking for a username and password. The default credentials are also on the sticker — usually "admin" for the username and "admin," "password," or a string of numbers for the password. Enter these and click Log In.
Locating the Wi-Fi password settings
Once you are logged in, you will see a dashboard or menu. Look for a section labeled "Wireless," "Wi-Fi," "Wireless Settings," or "Security." Different manufacturers organize this differently — Netgear puts it under "Advanced," while TP-Link and Linksys usually have it as a main menu item on the left side.
Click into that section and you should see a field labeled "Passphrase," "Pre-Shared Key," "Password," or "Network Key." This is the password people use to connect to your Wi-Fi. The current password will be hidden or shown in dots, but you can usually click a button to reveal it if you need to see what it currently is.
Entering and saving your new password
Click in the password field and clear the current entry. Type your new password — make it at least 12 characters long and include a mix of uppercase letters, lowercase letters, numbers, and symbols if the modem allows it. Avoid dictionary words and personal information like your address or birthday.
Before you save, write the new password down on paper or in a password manager. Once you click Save or explore, the modem will restart and disconnect everyone from Wi-Fi. You will need the new password to reconnect, and if you forget it before reconnecting your devices, you will have to log back into the modem settings to retrieve it.
Click the Save, explore, or Confirm button. The modem will restart — this usually takes 30 seconds to two minutes. Your Wi-Fi will drop during this time, which is normal. Once the lights on the modem stabilize, your Wi-Fi is back online with the new password.
Reconnecting your devices after the password change
Every device that was connected to your Wi-Fi will now show "No Internet" or "Cannot Connect" because it is still trying to use the old password. Go to each device's Wi-Fi settings, forget the network, and reconnect by selecting your network name and entering the new password.
On phones and tablets, this usually means going to Settings > Wi-Fi, finding your network, tapping "Forget," then reconnecting. On computers, it is Settings > Network > Wi-Fi > Manage Known Networks, selecting your network, and clicking Forget, then reconnecting. Smart home devices, printers, and streaming devices will need the same treatment.
Changing the modem admin password afterward
The admin password — the one you used to log into the settings page — is still the default from the sticker. Anyone with physical access to your modem can read that sticker and change your Wi-Fi password. You should change the admin password too, though this is less urgent than changing the Wi-Fi password.
Log back into the modem settings page using the same IP address or web address. Look for "Administration," "Admin Settings," "System Settings," or "User Management." You will see fields for the admin username and password. Change the password to something strong and different from your Wi-Fi password, then save. You will be logged out and will need to log back in with the new credentials.
What to do if you forgot the admin password
If you cannot remember the admin password and the default from the sticker does not work, you can factory reset the modem. This erases all your custom settings — including your Wi-Fi password — and returns the modem to factory defaults. You will have to set everything up again from scratch.
To factory reset, locate the small reset button on the modem (usually recessed so you need a paperclip or pin to press it). Hold it down for 10 to 15 seconds while the modem is powered on. The lights will flash and the modem will restart. Once it is back online, use the default credentials from the sticker to log in again, and you can set a new Wi-Fi password and admin password.
Frequently Asked Questions
Do I need to change my Wi-Fi password if I just changed my admin password?
No — the admin password and Wi-Fi password are separate. Changing one does not affect the other. However, it is a good idea to change both if you are concerned about security, since the admin password is printed on a sticker anyone can see.
Will changing the password kick me off the internet?
Yes, temporarily. The modem restarts when you save the new password, which takes 30 seconds to two minutes. Your Wi-Fi will drop during the restart, but it will come back online with the new password active.
What if I change the password and then forget it?
Log back into the modem settings page using the IP address or web address, and you can view or change the password again. If you also forgot the admin password, you will need to factory reset the modem.
Can I change the Wi-Fi password from my phone?
Yes, as long as your phone is connected to the Wi-Fi. Open a browser, type the modem's IP address or web address into the address bar, and log in the same way you would from a computer. The steps are identical.
Should I use the same password for Wi-Fi and admin?
No. Use a strong, unique password for the admin login and a different strong password for Wi-Fi. This way, if someone learns your Wi-Fi password, they cannot also access the modem settings.