When and how to swap out your Xfinity modem

You can replace your Xfinity modem yourself by unplugging the old one, connecting the new modem to your cable line and power outlet, and waiting for the lights to stabilize—usually three to five minutes. If you rented the modem from Comcast, you'll need to return the old one to an Xfinity store or arrange a pickup. If you own it, you can keep it or recycle it. The whole process takes about 10 minutes and requires no tools.

Most people replace a modem because it's old and slow, stops connecting to the internet, or won't reach all the rooms in the house. Xfinity modems typically last four to six years before performance drops noticeably. You can buy a new modem from Xfinity, a retailer like Best Buy or Amazon, or use your own compatible modem—Xfinity publishes a list of approved models on their website.

Key Takeaways

  • Unplug your old modem, plug in the new one, and wait three to five minutes for the lights to show a stable connection.
  • If you rented the modem from Xfinity, return it to an Xfinity store or request a pickup; if you own it, you can recycle it or keep it.
  • You can buy a replacement modem from Xfinity, a retail store, or online—or use your own modem if it's on Xfinity's approved list.
  • Write down your WiFi password before you unplug the old modem so you can reconnect devices afterward.

Gather what you need before you start

Have your WiFi password written down or saved somewhere you can see it without logging into your router. When you unplug the old modem, you lose internet access, so you won't be able to look it up online. If you don't know your password, log into your Xfinity account on a phone or computer while the old modem is still running and write it down.

Locate the cable outlet where your modem connects—usually in a living room, bedroom, or closet. Make sure you have a power outlet nearby. If your new modem is different from the old one, check that the cable connector type matches. Most Xfinity modems use a standard coaxial cable (the thick threaded connector), but confirm this before you start.

Disconnect the old modem

Unplug the power cable from the back of the modem first. Wait 30 seconds, then unplug the coaxial cable—the thick cable that screws onto the back of the modem. You don't need to force it; turn it counterclockwise gently until it comes free. If the cable is tight, use a small wrench or pliers to grip the connector (not the cable itself) and turn slowly.

Set the old modem aside in a safe place. If it's a rental, keep it in good condition for return. If you own it, you can recycle it at Best Buy, Staples, or your local e-waste facility—many accept modems for free.

Connect the new modem

Take the coaxial cable you just removed and screw it onto the cable port on the back of the new modem. Hand-tighten it until it's snug; you should not need tools. Plug the power cable into the modem, then plug the other end into a power outlet. The modem will start up automatically.

Do not plug in an ethernet cable or connect to WiFi yet. Let the modem sit for three to five minutes while the lights on the front stabilize. You'll see lights for power, internet, and WiFi. The internet light should turn solid green or blue (the color depends on the model). If it stays red or orange after five minutes, the modem may not be getting a signal—check that the cable is screwed on tightly and that the outlet itself works.

Reconnect your devices

Once the internet light is solid, open the WiFi settings on your phone, laptop, or tablet. Look for your network name (SSID)—it's usually printed on a sticker on the modem or in your Xfinity account. Select it and enter your WiFi password. If you're not sure which network is yours, check the sticker on the modem or log into your Xfinity account from a phone on cellular data.

Reconnect all your devices one at a time: phones, tablets, computers, smart TVs, and smart home devices. This usually takes a few minutes. If a device won't connect, forget the network in its WiFi settings and reconnect by entering the password again. Restart the device if it still won't connect.

Return a rented modem to Xfinity

If you rented the modem from Xfinity, you have two options: drop it off at an Xfinity store or request a prepaid shipping label online. To find a store near you, go to xfinity.com, click "Find a Store," and enter your zip code. Bring the modem and any cables that came with it. You don't need an appointment.

To arrange a pickup instead, log into your Xfinity account, go to the "Devices" or "Equipment" section, and look for a return option. Xfinity will email you a prepaid shipping label. Pack the modem in a box, attach the label, and drop it at a UPS location or arrange a pickup. Keep the tracking number until the return is confirmed in your account.

Troubleshoot if the internet light won't turn green

If the internet light stays red or orange after five minutes, first check that the coaxial cable is hand-tight on both ends—the modem and the wall outlet. Unscrew it slightly and screw it back on firmly. Wait another minute and see if the light changes.

If the light is still not green, restart the modem by unplugging the power cable for 30 seconds, then plugging it back in. Wait five minutes for it to fully restart. If the light is still red after that, the cable line itself may be down in your area, or the modem may not be provisioned on your account yet. Contact Xfinity support at 1-800-934-6489 or through the Xfinity app to report the issue. Have your account number and the modem's serial number (printed on the sticker) ready.

Frequently Asked Questions

Do I need to call Xfinity before I replace my modem?

No. If you're replacing a modem you own with another modem you own, you can do it without calling. If you're returning a rented modem and getting a new one from Xfinity, the company will provision the new modem on your account automatically once it detects it on the line—usually within a few minutes. You only need to call if the internet light doesn't turn green after 10 minutes.

Can I use any modem with Xfinity?

No. Xfinity publishes a list of approved modems on their website. Check the list before you buy. Most newer modems from major brands like Netgear, Motorola, and Arris work, but some older models or budget brands may not be compatible. If you buy an unapproved modem, Xfinity won't provision it and your internet won't work.

What if I don't know my WiFi password?

Before you unplug the old modem, log into your Xfinity account on a phone or computer and look for the WiFi password in the account settings or device details. Write it down. If you've already unplugged the modem and can't remember the password, you can reset the WiFi network by pressing and holding the reset button on the back of the new modem for 10 seconds—this will erase the old password and let you create a new one.

How long does it take for the modem to fully start up?

Most modems are ready to use after three to five minutes. The internet light should turn solid green or blue. If you're still seeing a blinking light after 10 minutes, restart the modem by unplugging it for 30 seconds. If the light doesn't stabilize after a restart, contact Xfinity support.

Can I keep my old modem if I rented it?

No. Rented modems belong to Xfinity and must be returned. If you don't return it, Xfinity may charge you a fee. Return it to an Xfinity store or use the prepaid shipping label option in your account.