The two ways to run two routers from one modem
You can connect two routers to a single modem in two different ways: daisy-chain mode (one router plugs into the other) or access point mode (both routers plug into the modem). Which one you choose depends on whether you need two separate networks or one unified network across your home.
Daisy-chain mode is simpler to set up but creates two distinct networks with different names and passwords. Access point mode is more complex but gives you seamless coverage—your phone or laptop stays connected to the same network as you move between rooms. Most people choose access point mode if they want better coverage in a large home or dead zones.
Both methods work with standard equipment. You do not need special routers or a new modem. The main difference is in how you plug things in and what settings you change on the second router.
Key Takeaways
- Daisy-chain mode plugs the second router into the first router's ethernet port, creating two separate networks that do not talk to each other.
- Access point mode plugs both routers directly into the modem and uses the same network name and password, so devices stay connected as you move around.
- Access point mode requires you to turn off DHCP on the second router and give it a different IP address than the first router.
- Daisy-chain mode works when ready after you plug in the cable, but access point mode needs configuration changes before it works correctly.
- If your modem has only one ethernet port, you must use daisy-chain mode or add a network switch.
Daisy-chain mode: one router plugs into the other
In daisy-chain mode, the first router connects to the modem as usual. Then you run an ethernet cable from one of the first router's ethernet ports (not the WAN port) into the WAN port of the second router. The second router then broadcasts its own separate network.
This setup is fast to configure because the second router works out of the box—it does not need any special settings. Each router has its own network name and password. Your devices see two different networks and you choose which one to join. The downside is that the two networks do not share files or devices easily, and moving between them means disconnecting and reconnecting.
Daisy-chain mode also reduces the speed available to devices on the second router, because all their traffic has to pass through the first router. If your modem delivers 100 Mbps and the first router is already using half of that, the second router's devices share what is left.
Access point mode: both routers plug into the modem
In access point mode, both routers connect directly to the modem using ethernet cables. This requires a modem with at least two ethernet ports, or a network switch plugged into the modem to create extra ports. Both routers broadcast the same network name and password, so your devices see one seamless network.
This setup is more complex to configure because you must change settings on the second router before it will work. You need to turn off DHCP (the service that assigns IP addresses to devices), give the second router a different IP address than the first one, and make sure both routers are on the same network range. If you skip these steps, the routers will conflict and devices will drop off the network.
The advantage is that devices stay connected to the same network as you move between rooms. Your phone does not disconnect and reconnect. You also get the full speed of your modem on both routers, rather than losing speed through the first router.
Step-by-step setup for access point mode
Step 1: Plug in both routers. Connect the first router to the modem with an ethernet cable in the WAN port (usually labeled or colored differently). Connect the second router to the modem or to a network switch with an ethernet cable in the WAN port. Power on both routers and wait two to three minutes for them to fully start.
Step 2: Log into the second router. Open a web browser on a computer or phone connected to the second router's network. Type the router's IP address into the address bar—this is usually printed on a sticker on the back of the router, often something like 192.168.1.1 or 192.168.0.1. Enter the default username and password (also on the sticker, often "admin" and "admin" or "admin" and the router's serial number).
Step 3: Turn off DHCP on the second router. Look for a settings menu labeled "DHCP", "LAN", or "Network". Find the toggle or checkbox that says "DHCP Server" or "Enable DHCP" and turn it off. Save the changes. This stops the second router from assigning IP addresses, which would conflict with the first router.
Step 4: Change the second router's IP address. In the same settings area, find the field for the router's own IP address (sometimes called "Router IP" or "LAN IP"). If the first router is 192.168.1.1, change the second router to 192.168.1.2 or 192.168.1.3. Save and wait for the router to restart—this usually takes one to two minutes.
Step 5: Give both routers the same network name and password. Log back into the second router (using the new IP address you just set). Find the WiFi settings, usually labeled "Wireless" or "WiFi". Change the network name (SSID) to match the first router exactly. Change the password to match as well. Save the changes.
Once both routers restart, your devices should see one network name. When you connect, you are connecting to whichever router is closest or has the strongest signal. As you move around your home, your device may switch between routers without disconnecting.
When to use a network switch instead of a second router
If your modem has only one ethernet port and you do not want to set up access point mode, you can plug a network switch into that port. A switch is a small box with four to eight ethernet ports that splits one connection into many. It costs between $20 and $50 and requires no configuration.
Plug the switch into the modem, then plug both routers into the switch. Each router will work as if it were plugged directly into the modem. This is simpler than access point mode if you want two separate networks, but it does not give you the seamless single-network experience that access point mode does.
Troubleshooting: devices keep dropping off the network
If your devices disconnect and reconnect frequently in access point mode, the most common cause is that DHCP is still turned on on the second router. Log back into the second router and confirm that DHCP is off. If it is already off, restart both routers by unplugging them for 30 seconds, then plugging them back in.
Another cause is that the two routers have overlapping IP address ranges. If the first router is set to 192.168.1.x and the second router is also set to 192.168.1.x, they will conflict. Change the second router to 192.168.2.x instead. You may need to look up your specific router model's settings menu to find where this is configured.
If devices connect but cannot reach the internet, check that both routers are using the same DNS settings. Most routers default to automatic DNS, which works fine. If you have manually set DNS on one router, set it the same way on the other.
When to call a professional
If you have tried access point mode and devices still drop off after restarting both routers and checking DHCP, the issue may be with your modem or routers themselves. A technician from your internet provider can confirm whether the modem is working correctly. If the modem is fine, one of the routers may have a hardware problem and need replacement.
If you are not comfortable logging into your router's settings, or if your router does not have a web interface (some older models do not), daisy-chain mode is the safer choice. It works without any configuration beyond plugging in a cable.
Frequently Asked Questions
Can I use two routers with different brands?
Yes. The routers do not need to match. In daisy-chain mode, any router works with any other. In access point mode, you need to be able to log into the second router's settings to turn off DHCP, which all modern routers support. Older routers (more than 10 years old) may not have this option.
Will two routers slow down my internet?
In daisy-chain mode, yes—the second router's devices share bandwidth that passes through the first router. In access point mode, no—both routers connect directly to the modem and do not compete for speed. Your overall speed is still limited by your modem and internet plan, not by the routers.
Do both routers need to be the same model?
No. Different models work fine in both daisy-chain and access point mode. The only requirement is that the second router has an ethernet port and a way to change its settings (usually a web interface or app).
What if my modem only has one ethernet port?
You can use daisy-chain mode (plug the second router into the first), or buy a network switch to create multiple ports from the one modem port. A switch costs $20 to $50 and plugs directly into the modem.
Can I use WiFi instead of ethernet cables to connect the routers?
In daisy-chain mode, some routers support wireless backhaul, which means the second router can connect to the first router over WiFi instead of ethernet. This is slower and less reliable than a wired connection, but works if running a cable is not possible. Check your router's manual to see if it supports this. Access point mode requires ethernet cables.