What You Need Before You Start
Your modem connects to the internet through a cable that comes into your home from your internet service provider (ISP). Before you plug anything in, gather these items: your modem, the coaxial cable (the thick cable with metal ends that screws on), a power adapter, and an ethernet cable if you plan to connect a computer directly. Most modems come with at least the power adapter and one ethernet cable in the box.
Check that you have a cable outlet on your wall — it looks like a TV cable jack but is labeled for internet or "data." If you're unsure which outlet is which, your ISP paperwork or a technician visit can confirm. You'll also need to know your account number and the service address where the modem is being installed, because your ISP needs to set up the modem on their network before it will work.
Key Takeaways
- The coaxial cable screws into both the wall outlet and the modem's cable port, and you tighten it by hand until snug — do not use a wrench.
- Plug the power adapter into the modem and then into a wall outlet; wait two to three minutes for the lights to stop blinking before testing.
- Your ISP must set up the modem on their network using the serial number on the back, which usually happens within 30 minutes but can take up to 24 hours.
- A solid or slowly blinking light on the modem means it is connected; a red light or constant rapid blinking means something is wrong and you should contact your ISP.
- You can connect a computer with an ethernet cable or use WiFi if your modem has a wireless router built in.
Connecting the Cable and Power
Locate the coaxial cable port on your modem — it is usually on the back and labeled "Cable In" or "Internet." Take the coaxial cable from the wall outlet and screw it onto this port by hand. Tighten it until it is snug, but do not use a wrench or pliers. Hand-tight is correct; over-tightening can damage the connector and cause signal problems.
Next, plug the power adapter into the modem's power port, then plug the adapter into a wall outlet. The modem will power on and begin its startup sequence. You will see lights on the front of the modem start to blink. This is normal. Leave the modem alone for two to three minutes while it boots up and searches for a signal from your ISP.
Understanding the Lights on Your Modem
Most modems have between three and six lights on the front. The exact names vary by brand, but they usually show power, internet signal, and data activity. When the modem first powers on, lights will blink rapidly as it searches for the network. After a minute or two, the blinking should slow down or stop.
A solid green or blue light means the modem has found the signal and is ready to work. A slowly blinking light also means the connection is good. A red light or constant rapid blinking means the modem cannot find the signal or is not activated yet. If you see red lights after five minutes, check that the coaxial cable is screwed in tightly and that you are using the correct wall outlet. If the lights are still red, contact your ISP — the modem may not be activated on their network yet.
Activating Your Modem With Your ISP
Your modem will not work on the internet until your ISP activates it on their network. To do this, you will need to call your ISP's customer service or use their website. Have your account number and the modem's serial number ready — the serial number is on a sticker on the back or bottom of the modem, usually labeled "S/N" or "Serial Number."
Tell the ISP representative that you are connecting a new modem and provide the serial number. They will add it to your account and set up it. This usually takes 15 to 30 minutes, but can sometimes take up to 24 hours. During set up, the modem may restart on its own — this is normal. Once set up is complete, the lights should show a solid connection, and you will be ready to connect devices.
Connecting Your Computer or Devices
You can connect to the internet in two ways: with an ethernet cable for a wired connection, or with WiFi for wireless devices. For a wired connection, plug an ethernet cable into one of the ports labeled "Ethernet" or "LAN" on the back of the modem, then plug the other end into your computer. Your computer should recognize the connection within a few seconds.
If your modem has a built-in WiFi router, you can connect wirelessly. Look on the back or bottom of the modem for a sticker that shows the WiFi network name (SSID) and password. On your phone, tablet, or laptop, go to WiFi settings, find that network name, and enter the password. You should be connected within a few seconds. If you do not see a WiFi network name on the modem, your modem may not have WiFi built in — in that case, you will need a separate router connected via ethernet.
Troubleshooting Common Connection Problems
If the modem lights are red or blinking rapidly after five minutes, first check the coaxial cable connection. Unscrew it from the modem, look at the metal connector, and make sure it is not bent or damaged. Screw it back in firmly and wait another two minutes. If the lights are still red, try unplugging the power adapter for 30 seconds, then plugging it back in. This soft reset often fixes temporary problems.
If the lights turn green but you still cannot reach the internet, the modem may be activated but your computer may not be connected properly. For ethernet, unplug the cable from both ends and plug it back in. For WiFi, forget the network in your device settings and reconnect by entering the password again. If you have tried these steps and still have no connection, contact your ISP — there may be an outage in your area or a problem with your account.
What to Do if the Modem Will Not set up
Sometimes the ISP cannot set up the modem right away. This usually means the serial number was entered incorrectly, the modem is not compatible with your ISP's network, or there is a problem with your account. Call your ISP and confirm the serial number matches what they have on file. If it does not, they will correct it and try again.
If your ISP says the modem is not compatible, you may need to use a modem they provide or one from their approved list. Check your service agreement or ask the representative which modems work with your plan. If there is a problem with your account — such as an unpaid bill or a service suspension — your ISP will tell you what needs to be fixed before set up can happen.
Frequently Asked Questions
How long does it take for the modem to connect after I plug it in?
The modem usually shows a solid connection light within two to three minutes of powering on. However, your ISP may need 15 minutes to an hour to set up it on their network before you can actually use the internet. If the lights are still blinking red after five minutes, something is wrong with the physical connection.
Do I need a separate router if my modem has WiFi?
No, if your modem has a built-in WiFi router, you can use it as-is. However, if you want better WiFi coverage, faster speeds, or more advanced features, you can connect a separate router to the modem using an ethernet cable. The modem will still handle the internet connection, and the router will handle the WiFi.
What does it mean if the modem light keeps blinking?
A slowly blinking light usually means the modem is working and data is moving. A rapidly blinking light means the modem is searching for a signal or trying to set up. If it blinks rapidly for more than five minutes, check the cable connection and call your ISP to confirm the modem is activated.
Can I move the modem to a different room?
You can move the modem as long as the coaxial cable from the wall outlet reaches it. However, moving it far from where the cable enters your home may require a longer cable. WiFi signal is also weaker the farther you are from the modem, so keep it in a central location if possible.
What should I do if the internet stops working after the modem was working fine?
First, check that the coaxial cable is still screwed in tightly and that the power adapter is plugged in. If both are find, unplug the power for 30 seconds and plug it back in. If the internet still does not work after the modem restarts, there may be an outage in your area — check your ISP's website or call them to confirm.