Connect your modem in four steps: power it off, swap the cables, restart it, and wait for the lights

A new modem connects to your wall outlet, your internet cable, and your router in a specific order. The whole process takes about 10 minutes, and most of it is waiting for the modem to restart. You do not need to call your internet provider unless the lights do not turn green after 5 minutes, or unless your provider requires you to register the modem's serial number before it will work.

The steps below assume you already have an active internet account with a provider. If you are setting up service for the first time, your provider will tell you when to plug in the modem — usually after they have activated your account in their system.

Key Takeaways

  • Turn off your old modem and router before you unplug anything, so you do not lose unsaved work on devices connected to them.
  • The coaxial cable (thick, with a metal connector) goes from the wall to the modem's port labeled "Cable In" or "Internet In".
  • The power cable plugs into the modem and then into a wall outlet; do not use a power strip if you can avoid it.
  • After you plug in the power, wait 3 to 5 minutes for the lights to stop blinking and turn solid green or blue before you assume something is wrong.
  • If the lights stay red or do not light up at all after 10 minutes, unplug the modem for 30 seconds, plug it back in, and wait again.

Gather the cables and locate the ports

Your new modem comes with a power cable and usually a coaxial cable (the thick cable with a metal connector on each end). Check the box for both before you start. If the coaxial cable is missing, you can reuse the one from your old modem — it is the same on every modem.

Look at the back of your new modem. You will see a port labeled "Cable In," "Internet In," or sometimes just "In." This is where the coaxial cable goes. You will also see a power port that looks like the one on your router or laptop. Some modems have additional ports for phone service or ethernet — ignore those for now.

Locate the coaxial cable that runs from your wall to your old modem. This cable screws onto the modem, so you will need to turn it counterclockwise to loosen it. Do not pull hard — it will come free with a gentle twist.

Power down your old equipment

Before you unplug anything, shut down or restart any computer or device that is actively using the internet. This prevents you from losing unsaved work. Then turn off your old modem and router using their power buttons, or unplug them if they do not have buttons.

Wait 30 seconds after you power them off. This clears the devices' memory and prevents conflicts when you power up the new modem.

Disconnect the old modem and connect the new one

Unplug the power cable from your old modem. Then unscrew the coaxial cable by turning it counterclockwise. The cable will come free — do not force it.

Take the coaxial cable and screw it onto the "Cable In" port on your new modem. Turn it clockwise until it is snug. You should not need a wrench — hand-tight is correct. If you screw it too hard, you can damage the connector inside the port.

Plug the power cable into the back of the new modem, then plug the other end into a wall outlet. Avoid power strips if you can; plug directly into the wall. Power strips can sometimes interfere with the modem's ability to stay connected.

Wait for the lights to stabilize

The modem will turn on and begin a startup sequence. You will see lights blinking on the front — usually one light for power, one for internet, and one for ethernet. The blinking means the modem is talking to your internet provider's system and downloading settings.

Wait 3 to 5 minutes. During this time, do not unplug the modem or restart your router. The lights should stop blinking and turn solid green or blue. The exact lights that light up depend on your modem model, but solid lights mean the modem is ready.

If you see a solid green or blue light next to "Internet" or "Online," your modem is connected. You can now plug your router back in and restart it. Your router will take another 2 to 3 minutes to restart and connect to the modem.

What to do if the lights stay red or do not turn on

If the lights are still blinking after 10 minutes, or if you see a red light, unplug the modem's power cable, wait 30 seconds, and plug it back in. This is called a power cycle, and it forces the modem to restart and try connecting again. Wait another 5 minutes.

If the lights still do not turn green after a second power cycle, check that the coaxial cable is screwed on tightly. Unscrew it slightly and screw it back in to make sure the connection is firm. Then power cycle the modem one more time.

If the lights are still not green after three power cycles, or if no lights turn on at all, the modem may be defective or your internet account may not be active yet. Contact your internet provider and tell them the modem is not connecting. Have the modem's serial number ready — it is usually on a sticker on the back or bottom of the modem.

Reconnect your router and test your internet

Once the modem's lights are solid green or blue, plug your router back in. Wait 2 to 3 minutes for the router to restart and connect to the modem. Then open a web browser on any device and try to load a website. If the page loads, your internet is working.

If the page does not load, restart your router by unplugging it for 30 seconds and plugging it back in. Wait another 3 minutes. If you still cannot connect, restart your computer or phone as well — sometimes devices hold onto old connection settings.

Frequently Asked Questions

Do I need to call my internet provider when I plug in the new modem?

Not usually. Most providers set up the modem automatically once it connects to their network. However, some providers require you to register the modem's serial number before it will work. Check your provider's website or the paperwork that came with the modem to see if registration is required. If the modem does not connect after 10 minutes, call your provider to confirm your account is active.

Can I use the coaxial cable from my old modem?

Yes. Coaxial cables are the same across all modems and providers. If your new modem did not come with one, you can unscrew the cable from your old modem and use it on the new one. Make sure the cable is not damaged — if it is kinked, pinched, or the connector is bent, replace it with a new one from your provider or an electronics store.

What if I see lights on the modem but the internet still does not work?

Restart your router and any devices that are trying to connect. If that does not work, power cycle the modem again by unplugging it for 30 seconds. If the internet still does not work after that, contact your provider — the modem may be connected but your account may have an issue.

Is it safe to plug the modem into a power strip?

It is safer to plug it directly into a wall outlet. Power strips can sometimes cause the modem to lose power briefly, which interrupts your internet. If you must use a power strip, make sure it is a high-quality one and that nothing else on the strip is drawing a lot of power.

How long does it take for the modem to fully connect?

Most modems are ready to use within 3 to 5 minutes of being powered on. Some may take up to 10 minutes if they are downloading a firmware update. If the lights are still blinking after 10 minutes, power cycle the modem and wait another 5 minutes before assuming something is wrong.