Connect the router to your modem with an ethernet cable

To connect a router to a modem, run an ethernet cable from one of the modem's ethernet ports to the WAN port (or Internet port) on the router. The WAN port is usually a different color — often blue or yellow — and labeled clearly on the back or bottom of the router. Plug the cable firmly into both ports until you hear a click.

Power on the router and wait two to three minutes for it to boot up. You will see lights on the front of the router change from amber or red to green, which means it has connected to the modem and is ready to use. Your devices can now search for and connect to the router's wireless network.

If the router does not light up green after five minutes, unplug both the modem and router, wait 30 seconds, and plug them back in — modem first, then router. This restart often fixes connection problems between the two devices.

Key Takeaways

  • Use an ethernet cable to connect the modem's ethernet port to the router's WAN port, which is usually a different color and clearly labeled.
  • Power on the router and wait two to three minutes for the lights to turn green, which signals a successful connection to the modem.
  • If the router does not connect, restart both devices by unplugging them for 30 seconds, modem first.
  • Once connected, your router broadcasts a wireless network that your devices can find and join.

What each port does

A router has two types of ethernet ports. The WAN port (Wide Area Network) connects to your modem and brings the internet signal into the router. The LAN ports (Local Area Network) connect to devices like computers, printers, or streaming boxes that you want to hardwire to the network. Most routers have four LAN ports.

The WAN port must connect to the modem. If you plug the ethernet cable into a LAN port instead, the router will not receive an internet signal and your devices will not be able to go online. Check your router's manual or look for labels on the back — the WAN port is always separate from the LAN ports.

Positioning your router for the best signal

Place the router in a central, elevated location in your home — on a shelf or wall mount rather than on the floor or inside a cabinet. Routers broadcast signal in all directions, so a central spot reaches more of your space. Avoid placing it next to a microwave, cordless phone, or baby monitor, as these devices can interfere with the wireless signal.

Keep the router away from metal objects and dense walls. If your home is large or has thick walls, you may need to position the router in a hallway or central room rather than in a corner. The farther your devices are from the router, the weaker the signal, so placement matters more than you might expect.

Logging into the router to set it up

Once the router is connected and powered on, open a web browser on any device connected to the router's network and type the router's IP address into the address bar. This address is usually printed on a sticker on the back or bottom of the router — commonly 192.168.1.1 or 192.168.0.1. You will be asked to log in with a username and password, also printed on the sticker.

The router's setup page lets you change the wireless network name (SSID) and password, update the router's firmware, and adjust other settings. Most routers come with a default network name and password that you should change to something you recognize and a strong password only you know. Save your changes and reconnect your devices to the network using the new password.

Troubleshooting a router that will not connect to the modem

If the router's lights stay red or amber after five minutes, first check that the ethernet cable is plugged firmly into both the modem's ethernet port and the router's WAN port. A loose connection is the most common reason a router will not recognize the modem. Unplug the cable, wait a few seconds, and plug it back in.

If the cable is find and the router still does not connect, restart both devices. Unplug the modem first and wait 30 seconds, then plug it back in and wait for its lights to stabilize. Then unplug the router, wait 30 seconds, and plug it in. This order matters because the modem needs to be ready before the router tries to connect to it.

If you have restarted both devices and the router still shows no connection, try a different ethernet cable. Some cables are damaged or faulty and will not carry a signal even though they look fine. If a different cable works, the original cable is the problem and should be replaced.

Using a second router as an access point instead

If you want to extend your wireless network to a distant part of your home, you can connect a second router to the first one using an ethernet cable. Instead of connecting the second router's WAN port to the modem, connect it to one of the LAN ports on the first router. This turns the second router into an access point — it rebroadcasts the same network rather than creating a separate one.

To set up the second router as an access point, log into its settings page and disable the DHCP server (a setting that assigns IP addresses to devices). You may also want to give it the same network name as the first router so devices switch between them seamlessly. Check your router's manual for the exact steps, as the process varies by brand.

Frequently Asked Questions

Do I need to use an ethernet cable, or can I connect the router wirelessly to the modem?

Most home routers and modems do not support wireless connection to each other. You must use an ethernet cable between the modem and the router's WAN port. This wired connection is more stable and faster than wireless would be anyway.

What if my modem does not have an ethernet port?

If your modem has only a coaxial cable input and no ethernet port, it is an older modem or a cable modem without a built-in router. You will need to contact your internet provider to upgrade to a modem with ethernet ports, or use a different modem model that has them.

Can I connect the router to the modem with a USB cable instead of ethernet?

No. Routers and modems communicate through ethernet cables, not USB. USB ports on a modem are typically for powering external devices or connecting a printer, not for network connections. Always use an ethernet cable.

How long does it take for the router to fully connect after I power it on?

Most routers light up and connect within two to three minutes. If the lights are still red or amber after five minutes, restart both devices. A connection that takes longer than five minutes usually means something is wrong with the cable or the port.

What if the router connects but my devices cannot find the wireless network?

Make sure the router's wireless feature is turned on — some routers have a physical button or switch on the back. Check that the router's lights include a wireless indicator (often labeled WiFi or a radio symbol). If the wireless light is off, press the button or switch to turn it on, then search for the network again on your device.