The Basic Connection: Ethernet Cable From Modem to Router
Connect your router to your modem using an Ethernet cable — the same type of cable that may already run from your modem to a computer. Plug one end into the port on the back of your modem labeled "Ethernet," "LAN," or sometimes just a numbered port. Plug the other end into the port on your router labeled "WAN," "Internet," or "Uplink." This is the only physical connection you need to make.
The WAN port is usually a different color from the other ports on the router — often yellow or a different shade — so it stands out. If you cannot find it, check the label on the back of your router or look at the manual that came with it. Once both ends are plugged in firmly, move to the next step.
You do not need to unplug your modem or restart anything yet. The devices will recognize each other once the router powers on.
Key Takeaways
- Use one Ethernet cable to connect the modem's Ethernet port to the router's WAN port — this is the only cable required for the connection to work.
- Power on the router and wait two to three minutes for the lights to stabilize before checking for WiFi networks on your phone or computer.
- The router's default WiFi name and password are printed on a sticker on the device itself, usually on the bottom or back.
- If you see no lights on the router after plugging it in, check that the power cable is fully inserted into both the outlet and the router.
- Most routers take five to ten minutes to fully boot and connect to the modem before you can use the WiFi.
Power On the Router and Wait for Lights
Plug the router's power cable into a wall outlet. You should see lights begin to turn on within a few seconds. Different routers have different light patterns, but you are looking for a light that indicates the internet connection is active — often labeled "Internet," "WAN," or "Online," and usually green or blue when working properly.
Wait two to three minutes for all the lights to stop changing. During this time, the router is communicating with the modem and setting up its WiFi network. Do not unplug it or move it during this startup period. Once the lights settle into a steady pattern, the connection is usually ready.
If the internet light stays red or off after five minutes, the Ethernet cable may not be fully inserted, or the modem itself may need to be restarted. Unplug the modem for 30 seconds, plug it back in, and wait another two minutes before checking the router lights again.
Find Your WiFi Network Name and Password
Look for a sticker on the bottom or back of your router. This sticker lists the WiFi network name (also called SSID) and the password you need to connect your devices. The network name might be something like "TP-Link-5G" or "Netgear-Guest" — it depends on the router brand and model.
Write down both the network name and password before you start connecting devices. You will need to type the password exactly as it appears, including capital letters and numbers. If the sticker is worn or missing, you can usually find this information in the router's manual or by logging into the router's settings page through a web browser on a computer that is already connected by Ethernet.
Connect Your First Device to the WiFi Network
On your phone, tablet, or computer, open the WiFi settings and look for the network name from the sticker. Tap or click on it and enter the password when prompted. Make sure you type the password exactly as shown — spaces, capitals, and special characters all matter.
Once you enter the password, the device should connect within a few seconds. You should see a checkmark or "Connected" label next to the network name. Open a web browser and try to load a website to confirm that internet traffic is flowing through the router to the modem.
What to Do If the Router Does Not Connect to the Modem
If the internet light on the router stays red or off after waiting five minutes, the Ethernet cable connection is likely the problem. Unplug the cable from both the modem and the router, wait 10 seconds, and plug it back in firmly. Make sure both ends are pushed in all the way — a loose connection is the most common reason for this failure.
If the light still does not turn green, restart the modem by unplugging it for 30 seconds, plugging it back in, and waiting three minutes for it to fully restart. Then check the router light again. If it remains red after the modem has restarted, the cable itself may be damaged, and you may need to try a different Ethernet cable.
Some modems have a specific port for connecting a router. If your modem has multiple Ethernet ports, try plugging the cable into a different port. Check your modem's manual or the label on the back to see which port is meant for router connections.
Changing the WiFi Password Later
The password on the sticker is a temporary default. You can change it to something easier to remember by logging into the router's settings. On a computer connected to the WiFi, open a web browser and type the router's IP address — usually 192.168.1.1 or 192.168.0.1 — into the address bar.
You will be asked to log in with a username and password. These are also printed on the sticker or in the manual, and they are different from the WiFi password. Once logged in, look for a section called "WiFi Settings," "Wireless," or "Network," where you can change the network name and password to whatever you prefer.
Frequently Asked Questions
Do I need to restart my modem after connecting the router?
Not always. If the router's internet light turns green within a few minutes of plugging it in, the modem and router have connected on their own. If the light stays red after five minutes, restart the modem by unplugging it for 30 seconds and plugging it back in.
Can I use WiFi while the router is still starting up?
You may see the WiFi network appear before the internet light turns green, but the connection will not work until the router has fully connected to the modem. Wait for the internet light to stabilize before trying to browse the web.
What if I lost the WiFi password from the sticker?
You can reset the router to its factory defaults by holding down the reset button on the back for 10 to 15 seconds. This will erase any changes you made and restore the original password from the sticker. You will need to set up the WiFi again from scratch.
Is it safe to leave the Ethernet cable connected after I set up WiFi?
Yes. Leaving the cable connected does not cause problems. Some people keep it plugged in so they can connect a computer directly to the modem for faster speeds if needed, while others unplug it to reduce clutter.
Why is my WiFi slow even though the internet light is green?
A green light means the router is connected to the modem, but it does not measure speed. Slow WiFi can result from distance from the router, interference from other devices, or a slow internet plan from your provider. Try moving closer to the router or restarting both the modem and router to see if speed improves.