Connect the modem to power and your internet line

Start by placing your CenturyLink modem in a central location in your home — ideally near where you spend the most time online, or in a spot that lets the signal reach the rooms you use most. Avoid closets, cabinets, or metal shelving, which block the wireless signal.

Plug the power cable into the back of the modem, then into a wall outlet or power strip. The modem will take 30 to 60 seconds to power on. You will see lights on the front panel begin to light up — usually a power light first, then others as the modem boots.

Take the cable that comes from your wall jack (the one labeled "Internet," "DSL," or "Phone") and plug it into the port on the back of the modem labeled "DSL" or "Line." This is the connection that brings your internet signal into the modem. Do not plug it into the "Phone" port unless you are also setting up phone service through CenturyLink.

Key Takeaways

  • Place the modem in a central location away from metal objects and enclosed spaces to get the strongest wireless signal throughout your home.
  • The DSL cable from your wall jack plugs into the port labeled "DSL" or "Line" on the back of the modem, not the phone port.
  • Wait for the lights on the front to stabilize — usually the power light, internet light, and wireless light will all be solid or blinking in a steady pattern within two to three minutes.
  • Connect your devices to the wireless network name and password printed on the modem's label, or use an ethernet cable for a wired connection.

Wait for the lights to show a stable connection

After you plug in the DSL cable, the modem needs time to connect to CenturyLink's network. Watch the lights on the front panel. You should see a power light (usually green) stay on constantly. Within 30 to 90 seconds, you will see an internet or "Online" light turn on or begin blinking steadily.

If you have a wireless modem, a wireless or WiFi light will also turn on. Once the power light and internet light are both on and stable (not flashing rapidly), the modem is ready to use. This usually takes two to three minutes total from the moment you plug in the DSL cable.

If the internet light stays off or blinks rapidly for more than five minutes, unplug the modem, wait 30 seconds, and plug it back in. This soft reset often fixes connection problems. If the light still does not come on after a second restart, contact CenturyLink to check whether your account is active and the line is working.

Connect a device using WiFi

On your phone, tablet, or computer, open the WiFi settings and look for a network name that matches the one printed on the label stuck to your modem. The label usually shows a network name (called an SSID) and a password below it. Select that network name from your device's WiFi list.

When prompted, type in the password exactly as it appears on the label — it is case-sensitive, meaning capital letters and lowercase letters are different. Once you enter the password correctly, your device will connect to the modem and you should have internet access within a few seconds.

If you want to change the network name or password to something easier to remember, you can log into the modem's settings page. Open a web browser and type 192.168.0.1 into the address bar, then log in with the username and password printed on the modem's label (usually "admin" and "motorola" or a similar default). From there you can customize the WiFi settings.

Connect a device using an ethernet cable

If you want a faster, more stable connection for a desktop computer, gaming console, or streaming device, use an ethernet cable instead of WiFi. Plug one end of the ethernet cable into one of the ports on the back of the modem labeled "Ethernet" or "LAN" (they are usually numbered 1, 2, 3, 4). Plug the other end into the ethernet port on your device.

The connection is automatic — your device will recognize the network and connect within a few seconds. You do not need to enter a password for an ethernet connection. An ethernet cable gives you faster speeds and a more reliable connection than WiFi, especially if you are far from the modem or have walls between you and it.

Troubleshoot if you cannot connect

If the internet light on the modem is off or red, the modem is not connected to CenturyLink's network. First, check that the DSL cable is plugged firmly into both the wall jack and the modem's DSL port. Unplug it and plug it back in to make sure it is seated properly. Then restart the modem by unplugging the power cable, waiting 30 seconds, and plugging it back in.

If the internet light comes on but your device cannot connect to the WiFi network, restart your device and try connecting again. If that does not work, forget the network in your device's WiFi settings, then reconnect and re-enter the password. Make sure you are typing the password exactly as it appears on the modem's label, including capital letters.

If you can see the WiFi network but cannot get online, or if the modem's lights do not stabilize after 10 minutes, the problem may be with your CenturyLink account or line. Contact CenturyLink's customer service to confirm your account is active and to check for outages in your area. Have your account number and the modem's model number (printed on the label) ready when you call.

Position the modem for the best signal

The location of your modem affects how strong your WiFi signal is in different rooms. Place it in a central, elevated location — on a shelf or table rather than on the floor — so the signal can spread evenly in all directions. Avoid putting it inside a cabinet, closet, or drawer, or behind a TV or other large object.

Keep the modem away from metal objects, microwaves, cordless phones, and baby monitors, which can interfere with the wireless signal. If you have a two-story home, placing the modem on the first floor usually gives better coverage than putting it upstairs. If you have dead zones where the signal is weak, you may want to add a WiFi extender or mesh system later, but the modem itself should work well in most homes as long as it is in a good central spot.

Frequently Asked Questions

How long does it take for a CenturyLink modem to fully connect?

The modem usually connects to the network within two to three minutes of being powered on and having the DSL cable plugged in. If the internet light is not on and stable after five minutes, restart the modem by unplugging it for 30 seconds and plugging it back in.

What do the lights on the modem mean?

The power light shows the modem is on. The internet or online light shows the modem is connected to CenturyLink's network. The WiFi light shows wireless is active. If the internet light is off or red, the modem is not connected to the network. If it blinks rapidly, the modem is trying to connect.

Can I use my own modem instead of the CenturyLink one?

CenturyLink allows you to use a compatible third-party modem, but you will need to contact them to set it up. They can provide the settings and configuration you need. Many people choose to use their own modem to avoid a monthly rental fee, but check CenturyLink's list of approved models first.

Why is my WiFi password different from what is on the modem?

If you changed the WiFi password after setting up the modem, you will need to use the new password, not the one on the label. If you forgot the new password, you can reset the modem to factory settings by holding the reset button for 10 seconds, which will restore the original password from the label.

Do I need to do anything special to set up phone service?

If you have CenturyLink phone service, plug your phone line into the port labeled "Phone" on the back of the modem. The modem will handle both internet and phone automatically. If you do not have phone service, leave that port empty.